HomeMy WebLinkAboutHIGH STRENGTH BOLTING REPORT - 22-00588 - Cedar Point Trucking - New Commercial BldgInspection Details
Date Contractor Inspector Weather Permit Number
06/02/2023 Titan Steel Ring, Rachael Cloudy 2200588
Project Specifications:
Snug Tight only
Full Tension/Slip Critical
Full Tension/Slip Critical:
TurnoftheNut method
Calibrated Wrench method
Direct Tension Indicators LoadIndicating Washers
Direct Tension Indicators TwistOffBolts (”Lejune” bolts)
Bolt Type:
ASTM A325
ASTM A490 Other
Bolt Type Other:
Bolt size
Diameter Length
3/4" & 1"1 1/2", 1 3/4",
2" and 3 1/2"
Washer Specifications:
Hardened washers
Plate washers
None required
General Conditions
Faying surfaces flush and in full contact
Faying surfaces free from paint, oil, etc.
Visually monitored turnofthenut method
Verified Installation equipment and bolts using Skidmore
Wilhelm tension measuring device
Visually Inspected twistoff bolts
Washers at slotted holes under turned element
Verified a minimum of 2 bolts per connection or 10% of all
bolts
Reference Drawing Sheet and Detail, and Approved RFI:Erection Drawings
Location(s):Rigid Frame
Notes:Results reported to Blake Larsen, onsite
Work inspected was:
in compliance in compliance, except as noted in comments section reinspection/retesting required
Note: The recording of false, fictitious, or fraudulent statements or entries on this document may be punishable as a felony under
Federal Statute.
✔
✔
✔
✔
✔
✔
✔
✔
✔
High Strength Bolting Report 00Report #:
06/06/2023Report Date:
Atlas Technical Consultants, LLC Idaho
Falls
1753 E Precision Drive
Idaho Falls, ID 83402
Phone: (208) 5298242
Client:
Titan Steel
PO Box 326
Rigby, ID 83442
Project:
E230633c
Cedarpoint, 3127 W 4700 S, Rexburg, ID
3127 W 4700 S
Rexburg, ID 83440
This report shall not be reproduced, in full, without prior written approval of Atlas Technical Consultants, LLC.
Results only relate to the items inspected or tested.
Page 1 of 2Page 1 of 1