HomeMy WebLinkAboutOrd_1298 Manufactured - April 2023 (2)CITY OF R EX BU RG
OR D INA N C E 1298 MA NU FA CTU R E D - APRIL 2023
N OW T HEREFORE, be it ordained by the Council of the City of Rexburg, in the
State of Idaho, as follow s:
SEC TION 1: AME N D MENT “M-N ” of the Rexburg D evelopment Code is
hereby am ended as follow s:
A M E N D M E N T
M-N
Manufactured Home: A single-family unit fabricated in one or more sections at a location
other than the home site by assembly line or similar production techniques or by other
construction methods typical of off-site manufacturing process. The home is transportable in
one (1) or more sections, w hich is built on a permanent chassis and designed to be used as a
dw elling with or without a permanent foundation w hen connected to the required utilities, and
includes plumbing, heating, air conditioning, and electrical systems contained therein.
Every section shall bear a label certifying that it is built in compliance w ith the Federal
Manufactured H ome C onstruction and Safety Standards (HU D ), June 15,1976 (42 U .S.C. Sec.
5401). A manufactured home may be designed to be tow ed on its own chassis or be delivered
to the site by other means.
Manufactured Housing C ommunity: A parcel of land under single ownership that has been
planned and improved for the placement of manufactured homes. The land has been divided
into one or more manufactured home lots for rent or sale. (See chapter 11.)
Mobile Vending C ourt: A n area that consists of four (4) or more vendors in an open-air
location w ith designated stalls or areas.
Mobile Vending Pushcart: A moveable pushcart that is operated by a vendor standing on the
sidew alk or street. (See vendor.)
Mobile Vending Structure: A temporary, approved structure for mobile vending.
Mobile Vending Trailer: A mobile trailer operated by a vendor standing on or w ithin the
frame of the trailer.
Mobile Vending Vehicle: A self-contained, motorized vehicle operated by a vendor standing
on or within the frame of the vehicle, w hich is capable of moving under its ow n pow er. (Ex:
Bus, Van)
Modular Home: A ny home other than a manufactured home that is of closed construction that
is prefabricated or assembled at a place other than the building site I.C. 39-4301).
Motel: A building or group of detached or connected buildings designed or used primarily for
providing sleeping accommodations for travelers and having automobile parking conveniently
located on the premises.
Motor Hotel: H otel w ith direct access from rooms to parking area.
Neighborhood Plan: A plan to guide the platting of remaining vacant parcels in a new or
partially-built-up neighborhood so as to make reasonable use of all land, correlate street
patterns, and achieve the best possible land use relationships.
New C onstruction: structures for w hich the "start of construction” commenced on or after the
effective date of this ordinance.
Nonconforming B uilding: A ny building w hich does not meet the limitations of building size
or location on a lot for the district in which the building is located and w as built prior to the
effective date of this ordinance. (See section 3.3.)
Nonconforming L ot: An existing lot, the area, w idth, size, or other characteristic of which,
fails to meet the requirements of the district in w hich it is located and w hich w as conforming
prior to the effective date of this ordinance. (See section 3.3.)
Nonconforming U se: A use not conforming to the provisions of this ordinance but w hich w as
law fully existing at the time of adoption of this ordinance. (See section 3.3.)
Nursery Schools: A building or structure w here care, protection, and supervision are provided
on a regular schedule, at least three times a week for six (6) or fewer children. (See subsection
4.00.040.)
SEC TION 2: AME N D MENT “SIG N-T” of the Rexburg D evelopment Code
is hereby am ended as follows:
A M E N D M E N T
SIG N -T
Stand: the area reserved for the placement of a manufactured home.
Standard D raw ings and Specifications: Standard draw ings and specifications are defined as
the Rexburg Engineering D epartment Standards Specifications and Draw ings as adopted by
the City of R exburg. (See City Engineering Standards.)
Start of C onstruction: Includes substantial improvement, and means the date the building
permit was issued provided the actual start of construction, repair, reconstruction, placement or
other improvement was w ithin one-hundred-eighty (180) days of the permit date. The actual
start means either the first placement of permanent construction of a structure on a site or the
placement of a manufactured home on a permanent foundation.
Stick Built: A building constructed at the location where it is to be used, not intended or
designed to be moved easily.
Story: That portion of a building included betw een the surface of any floor and the surface of
the floor next above it, or if there be no floor above it, the space between such floor and the
ceiling above it. A basement shall be counted as a story if its ceiling is over six (6’) feet above
the average level of the finished ground surface adjoining the exterior w alls of such story, or if
it is used for business or dw elling purposes.
Street: A public or private thoroughfare used, or intended to be used for passage or travel by
motor vehicles. D rivew ays are not included. Streets are further classified by the functions they
perform.
A.A lley Street: A public service w ay used to provide secondary vehicular access to
properties otherwise abutting upon a street.
B.A rterial Street: Roads conveying traffic from betw een major activity centers w ithin
the community and traffic through the City. Efficient movement is the primary function
of arterial roads. Private and front access should be controlled and limited to high
volume generators of vehicle trips.
C.C ollector Street: Streets that conduct and distribute traffic between other residential
streets of lower-order and higher-order streets or major activity centers. This is the
highest-order of a street appropriate to a residential neighborhood and residential
frontage along it should be prohibited or severely restricted.
D.C ul-de-sac Street: A short local street having one end permanently terminated in a
vehicular turnaround with a length of no greater than six-hundred (600’) feet.
E.Frontage Street: A minor street parallel and adjacent to an arterial route and intercepts
local streets and controls access to an arterial route.
F.Minor R esidential Street: A minor street with both terminal points on the same street
or origin that serves no more than fifty (50) single-family lots on one (1) street.
G.R esidential A ccess Streets or Local Streets: A street w ith the sole purpose of
providing frontage for service and access to private lots. These streets carry only traffic
having either destination or origin on the street itself. The elimination of through traffic
and the geometric design of the street are means to promote safety and to create a
desirable residential neighborhood.
H.R ural R esidential Street: A minor street that serves a rural residential subdivision that
does not require curb and gutter, but may require a concrete edging strip.
Structure: A w alled and roofed building including a gas or liquid storage tank that is
principally above ground.
Subdivider: An individual, firm, corporation, partnership, association, syndication, trust, or
other legal entity having sufficient proprietary rights in the property to represent the owner, that
submits the required subdivision application and initiates proceeding for the subdivision of land
in accordance w ith applicable regulations.
Subdivision: The division of any lot, tract, or parcel of land into three (3) or more parts, for the
purposes of transfer of ow nership or development and the dedication of a public street and the
addition to, or creation of a cemetery.
Substantial Damage: Damage of any origin sustained by a structure w hereby the cost of
restoring the structure to its before-damaged condition w ould equal or exceed fifty (50%)
percent of its market value before the damage occurred.
Substantial Improvement: O ccurs when the first alteration of any wall, ceiling, floor, or other
structural part of the building commences, w hether or not that alteration affects the external
dimensions of the structure. A ny repair, reconstruction, or improvement of a structure, the cost
of which equals or exceeds fifty (50%) percent of the market value of the structure either:
A.Before the improvement or repair is started, or
B.If the structure has been damaged and is being restored before the damage occurred.
The term does not, how ever, include either:
A.A ny project for improvement of a structure to comply w ith existing state or local
health, sanitary, or safety code specifications w hich are solely necessary to assure
saving living conditions, or
B.A ny alteration of a structure listed on the N ational R egister of Historic Places or a
State Inventory of Historic Places.
Surveyor: A ny person who is registered and certified in the State of Idaho to engage in the
practice of land surveying.
SEC TION 3: AME N D MENT “CH A PTER 11
MA N UFA C TU RED/MO BILE H O MES” of the Rexburg D evelopment Code is hereby
am ended as follows:
A M E N D M E N T
CH A PTER 11 MA NU FA CTURED H O MES
SEC TION 4: AME N D MENT “11.01.010 Purpose A nd Objectives” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.01.010 Purpose A nd O bjectives
This Chapter establishes minimum standards and requirements for the occupation of
manufactured homes and for the construction and operation of manufactured home
communities. It is concerned with the relationship of the manufactured home to adjacent land
uses in order to protect and secure the public health, safety and general welfare of the C ity of
Rexburg.
A.Objective. The regulations in this Chapter are intended to provide a stable, healthy
environment, together w ith the full range of services, for those residents in
Manufactured Homes on a permanent or temporary basis.
B.Safety Inspections. Must meet all safety inspection requirements.
SEC TION 5: AME N D MENT “11.01.020 Definitions” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.01.020 D efinitions
SEC TION 6: AME N D MENT “11.2 MAN UFACTU RED/MO BILE HO ME
REQU IR EMEN TS” of the R exburg Development C ode is hereby am ended as follows:
A M E N D M E N T
11.2 MA N U FA CTU R ED HO ME REQ UIREMENTS
SEC TION 7: AME N D MENT “11.02.010 New Manufactured H ousing
Units” of the Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.02.010 N ew Manufactured H ousing Units
A.N ew Manufactured Home Conditions.
1.Roof. It shall have a non-glare, w ood shake, or asphalt roof w ith a minimum
slope of 3/12 and a minimum six (6") inch eaves.
2.Exterior Siding. The home shall have exterior siding that is residential in
character, including but not limited to clapboards or simulated clapboards such
as conventional vinyl or metal siding or similar material. The siding shall not
be composed of smooth, ribbed or corrugated metal or plastic panels.
SEC TION 8: AME N D MENT “11.02.020 Skirting” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.02.020 Skirting
Skirting of Manufactured H omes is required, but such skirting shall not attach the
Manufactured H ome permanently to the ground or create a fire hazard.
SEC TION 9: AME N D MENT “11.02.030 Wheels” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.02.030 Wheels
Removing the w heels of a Manufactured H ome or setting the Manufactured H ome on posts or
footings shall not make the Manufactured H ome exempt from the requirements of this Chapter.
A.Mobilize. The wheels of the Manufactured H ome may be removed, but axles, springs
and other equipment needed to mobilize must remain.
B.Jacks or Stabilizers. Jacks or stabilizers may be placed under the frame of the
Manufactured Home to prevent movement on the springs w hile the Manufactured
H ome is parked and occupied.
SEC TION 10: A MEND MEN T “11.02.040 Location” of the R exburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.02.040 Location
A.N ew Manufactured Home Conditions.1.Roof. It shall have a non-glare, w ood shake, or asphalt roof w ith a minimumslope of 3/12 and a minimum six (6") inch eaves.2.Exterior Siding. The home shall have exterior siding that is residential incharacter, including but not limited to clapboards or simulated clapboards suchas conventional vinyl or metal siding or similar material. The siding shall notbe composed of smooth, ribbed or corrugated metal or plastic panels.SEC TION 8: AME N D MENT “11.02.020 Skirting” of the RexburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T11.02.020 SkirtingSkirting of Manufactured H omes is required, but such skirting shall not attach theManufactured H ome permanently to the ground or create a fire hazard.SEC TION 9: AME N D MENT “11.02.030 Wheels” of the RexburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T11.02.030 WheelsRemoving the w heels of a Manufactured H ome or setting the Manufactured H ome on posts orfootings shall not make the Manufactured H ome exempt from the requirements of this Chapter.A.Mobilize. The wheels of the Manufactured H ome may be removed, but axles, springsand other equipment needed to mobilize must remain.B.Jacks or Stabilizers. Jacks or stabilizers may be placed under the frame of theManufactured Home to prevent movement on the springs w hile the ManufacturedHome is parked and occupied.SEC TION 10: A MEND MEN T “11.02.040 Location” of the R exburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.02.040 Location11.02.040 Location
A.Manufactured housing units are only permitted in Manufactured H ousing
Communities w ith a Conditional U se Permit (CU P) in LD R3.
B.Industrial Zones. Manufactured H omes used for residential quarters for watchmen or
caretakers and located on the premises of an industrial establishment in any industrial
zone shall be permitted.
SEC TION 11: A MEND MEN T “11.3 MAN U FA CTU R ED /MO B ILE
HO ME COMMUN ITY ” of the Rexburg D evelopment Code is hereby am ended as follow s:
A M E N D M E N T
11.3 MA N U FA CTU R ED HO ME COMMUN ITY
SEC TION 12: A MEND MEN T “11.03.010 B uilding Permit After Location
Approval” of the R exburg Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.010 B uilding Permit After Location A pproval
No building permit shall be issued for construction of a new Manufactured H ousing
Community or expansion of an existing Manufactured H ousingCommunity in any district until
the proposed location is approved w ith the stipulations of the approval stated therein.
SEC TION 13: A MEND MEN T “11.03.020 A ccessory Buildings” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.03.020 A ccessory Buildings
Structures located in any Manufactured Home space shall be limited to a storage building,
ramada or carport. The storage structure, ramada or carport may be combined as one structure.
A.“Structure A dditions” includes the construction of aw nings, patio covers, or cabanas
adjacent to a Manufactured.
B.U nattached. N o structural additions shall be built onto or become a part of any
Manufactured Home, and no Manufacturede Home shall support any building in any
11.02.040 LocationA.Manufactured housing units are only permitted in Manufactured H ousingCommunities w ith a Conditional U se Permit (CU P) in LD R3.B.Industrial Zones. Manufactured H omes used for residential quarters for watchmen orcaretakers and located on the premises of an industrial establishment in any industrialzone shall be permitted.SEC TION 11: A MEND MEN T “11.3 MAN U FA CTU R ED /MO B ILEHOME COMMUN ITY ” of the Rexburg D evelopment Code is hereby am ended as follow s:A M E N D M E N T11.3 MA N U FA CTU R ED HO ME COMMUN ITYSECTION 12: A MEND MEN T “11.03.010 B uilding Permit After LocationApproval” of the R exburg Development C ode is hereby am ended as follows:A M E N D M E N T11.03.010 B uilding Permit After Location A pprovalNo building permit shall be issued for construction of a new Manufactured H ousingCommunity or expansion of an existing Manufactured H ousingCommunity in any district untilthe proposed location is approved w ith the stipulations of the approval stated therein.SEC TION 13: A MEND MEN T “11.03.020 A ccessory Buildings” of theRexburg Development Code is hereby amended as follow s:A M E N D M E N T11.03.020 A ccessory BuildingsStructures located in any Manufactured Home space shall be limited to a storage building,ramada or carport. The storage structure, ramada or carport may be combined as one structure.
A.“Structure A dditions” includes the construction of aw nings, patio covers, or cabanas
adjacent to a Manufactured.
B.U nattached. N o structural additions shall be built onto or become a part of any
Manufactured Home, and no Manufacturede Home shall support any building in anyManufactured Home, and no Manufacturede Home shall support any building in any
manner.
C.N o Building Permit Required. Lightweight aw nings, ramadas, and other lightweight
structures and additions are allow ed w ithout a building permit.
1.Less than 200 sq. ft. Accessory buildings that are less than tw o hundred (200)
square feet do not require a building permit.
D.Building Permit R equired. All other structures will require a building permit. (e.g.,
those attached to the home, those occupied on a daily basis, porches w ith covers, and
any structure or addition which requires a railing.)
SEC TION 14: A MEND MEN T “11.03.030 D ensity Requirements” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.03.030 D ensity Requirements
In no event shall the density exceed ten (10) manufactured homes per gross acre.
A.D ensity requirements shall be established as the minimum square footage of gross site
area for each Manufactured Home.
1.Consolidation of density may only be achieved through an approved Planned
Unit D evelopment or designated open-space areas.
B.Streets. If it is determined by the C ity of Rexburg staff that a street w idening or
terminating dedication is necessary, the amount of land dedicated shall be subtracted
from the gross site area w hen calculating the proposed density.
SEC TION 15: A MEND MEN T “11.03.040 Parking” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.040 Parking
A.U noccupied Manufactured Home. Parking of unoccupied Manufactured H omes is
prohibited on public premises, streets, alleys, or highways, at all times, except for
emergency purposes.
B.Parking Space R equirements
1.Size. There shall be two (2) vehicle parking spaces at least nine feet by tw enty
feet (9' x 20') in size for each Manufactured Home space.
2.Access. Such space shall have a clear and unobstructed access to an access
way. A ny parking in the access w ay shall not fulfill this requirement.
Manufactured Home, and no Manufacturede Home shall support any building in anymanner.C.N o Building Permit Required. Lightweight aw nings, ramadas, and other lightweightstructures and additions are allow ed w ithout a building permit.1.Less than 200 sq. ft. Accessory buildings that are less than tw o hundred (200)square feet do not require a building permit.D.Building Permit R equired. All other structures will require a building permit. (e.g.,those attached to the home, those occupied on a daily basis, porches w ith covers, andany structure or addition which requires a railing.)SEC TION 14: A MEND MEN T “11.03.030 D ensity Requirements” of theRexburg Development Code is hereby amended as follow s:A M E N D M E N T11.03.030 D ensity RequirementsIn no event shall the density exceed ten (10) manufactured homes per gross acre.A.D ensity requirements shall be established as the minimum square footage of gross sitearea for each Manufactured Home. 1.Consolidation of density may only be achieved through an approved PlannedUnit D evelopment or designated open-space areas.B.Streets. If it is determined by the C ity of Rexburg staff that a street w idening orterminating dedication is necessary, the amount of land dedicated shall be subtractedfrom the gross site area w hen calculating the proposed density.SEC TION 15: A MEND MEN T “11.03.040 Parking” of the RexburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T11.03.040 ParkingA.U noccupied Manufactured Home. Parking of unoccupied Manufactured H omes isprohibited on public premises, streets, alleys, or highways, at all times, except foremergency purposes.
B.Parking Space R equirements
1.Size. There shall be two (2) vehicle parking spaces at least nine feet by tw enty
feet (9' x 20') in size for each Manufactured Home space.
2.Access. Such space shall have a clear and unobstructed access to an access
way. A ny parking in the access w ay shall not fulfill this requirement.way. A ny parking in the access w ay shall not fulfill this requirement.
3.Visitor Parking. Ten (10%) percent visitor parking shall be required.
4.Tandem Parking. Tandem parking is allow ed with Zoning A dministrator or
designee approval.
SEC TION 16: A MEND MEN T “11.03.050 C onditional Use Permit” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.03.050 C onditional Use Permit
A.A pplication Submittal.
1.Application. Applicant shall fill out an application for a Conditional U se
Permit to construct a new Manufactured Housing Community or to expand an
existing Manufactured H ousing Community.
2.Infrastructure Plan. O ne (1) digital copy of the Infrastructure Plan of the
proposed community in .pdf A utoCA D format shall be submitted w ith the
application containing the following information:
a.General Layout. The Infrastructure Plan should show the general
layout of the entire Manufactured H ousing Community.
b.C ompass or N orth A rrow. North orientation of the Infrastructure
Plan.
c.C ommunity B oundary & D imensions. Boundaries and dimensions
of the Manufactured H ousing C ommunity.
d.D rafter or Engineer. Name of the person who prepared the
Infrastructure Plan.
e.E lectrical. Electrical Systems for the development and connection
details for each pad.
f.Fire Hydrants. Location of fire hydrants.
g.Garbage. Location and screening of all garbage dumpsters.
h.L ighting. Location and detail of all lighting fixtures for streets and
spaces.
i.Patio C onstruction D etails.
j.Proposed N ame. Name of the Manufactured Housing Community
and address.
k.E xisting & Proposed Structures. Location and dimensions of all
existing or proposed structures.
l.R ecreation. Location and size of all proposed recreation areas and
buildings. Show details.
m.R oads & Sidew alks. Location and width of roads or access w ays.
R oad and sidew alk construction details.
n.Scale. The Infrastructure Plan should be draw n to a scale not smaller
way. A ny parking in the access w ay shall not fulfill this requirement.3.Visitor Parking. Ten (10%) percent visitor parking shall be required.4.Tandem Parking. Tandem parking is allow ed with Zoning A dministrator ordesignee approval.SEC TION 16: A MEND MEN T “11.03.050 C onditional Use Permit” of theRexburg Development Code is hereby amended as follow s:A M E N D M E N T11.03.050 C onditional Use PermitA.A pplication Submittal.1.Application. Applicant shall fill out an application for a Conditional U sePermit to construct a new Manufactured Housing Community or to expand anexisting Manufactured H ousing Community.2.Infrastructure Plan. O ne (1) digital copy of the Infrastructure Plan of theproposed community in .pdf A utoCA D format shall be submitted w ith theapplication containing the following information:a.General Layout. The Infrastructure Plan should show the generallayout of the entire Manufactured H ousing Community.b.C ompass or N orth A rrow. North orientation of the InfrastructurePlan.c.C ommunity B oundary & D imensions. Boundaries and dimensionsof the Manufactured H ousing C ommunity.d.D rafter or Engineer. Name of the person who prepared theInfrastructure Plan.e.E lectrical. Electrical Systems for the development and connectiondetails for each pad.f.Fire Hydrants. Location of fire hydrants.g.Garbage. Location and screening of all garbage dumpsters.h.L ighting. Location and detail of all lighting fixtures for streets andspaces.i.Patio C onstruction D etails.j.Proposed N ame. Name of the Manufactured Housing Communityand address.k.E xisting & Proposed Structures. Location and dimensions of allexisting or proposed structures.
l.R ecreation. Location and size of all proposed recreation areas and
buildings. Show details.
m.R oads & Sidew alks. Location and width of roads or access w ays.
R oad and sidew alk construction details.
n.Scale. The Infrastructure Plan should be draw n to a scale not smaller
than one (1”) inch representing forty (40’) feet.
o.Screening. Location and type of landscaping, planting, fence, wall, or
combination of any of these or other screening materials.
p.Spaces. Location and dimensions of each Manufactured H ome space.
q.Storm drainage system details.
r.Swimming pools. Sw imming pools require a building permit w ith
detailed plans and District H ealth D epartment approval.
s.Typical Space. Enlarged site plan of a typical Manufactured H ome
space, show ing location of the pad, parking area, patio, storage space,
sidew alk, utility connections and landscaping.
t.Vicinity Map. Vicinity map showing relationship of Manufactured
H ousing Community to adjacent properties including the names of the
contiguous ow ners.
u.Walkways. Location and width of w alkw ays.
v.Water & Wastew ater. Location and details of the proposed w ater
and w astew ater systems for the Manufactured Housing Community.
Water and Wastew ater systems designed and signed by an Idaho
registered engineer. The detailed plans shall show how connections
are to be provided to each pad and how the w ater and sewer
connections will be protected from freezing.
3.Management policies, covenants and restrictions. A draft of the proposed
management policies, covenants, and restrictions shall be submitted with the
application.
B.Final A pproval. Final approval of said use shall be contingent upon the submission of
acceptable detailed Infrastructure Plans of the proposed Manufactured H ousing
Community development as required by the City Development C ode.
SEC TION 17: A MEND MEN T “11.03.060 A ccess” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.060 A ccess
All public streets shall be constructed per current City Engineering Standards. Accesses shall
have the following minimum pavement widths if the streets are privately owned and
maintained:
A.Pavement Widths.
1.Public Street A ccess. A Manufactured H ousing Community shall not be
established on any site that does not have access to a public street on w hich
the potential paving width is less than forty (40’) feet.
2.Entrance Street and collectors with guest/community parking on both sides
than one (1”) inch representing forty (40’) feet.o.Screening. Location and type of landscaping, planting, fence, wall, orcombination of any of these or other screening materials.p.Spaces. Location and dimensions of each Manufactured H ome space.q.Storm drainage system details.r.Swimming pools. Sw imming pools require a building permit w ithdetailed plans and District H ealth D epartment approval.s.Typical Space. Enlarged site plan of a typical Manufactured H omespace, show ing location of the pad, parking area, patio, storage space,sidew alk, utility connections and landscaping.t.Vicinity Map. Vicinity map showing relationship of ManufacturedHousing Community to adjacent properties including the names of thecontiguous ow ners.u.Walkways. Location and width of w alkw ays.v.Water & Wastew ater. Location and details of the proposed w aterand w astew ater systems for the Manufactured Housing Community.Water and Wastew ater systems designed and signed by an Idahoregistered engineer. The detailed plans shall show how connectionsare to be provided to each pad and how the w ater and sewerconnections will be protected from freezing.3.Management policies, covenants and restrictions. A draft of the proposedmanagement policies, covenants, and restrictions shall be submitted with theapplication.B.Final A pproval. Final approval of said use shall be contingent upon the submission ofacceptable detailed Infrastructure Plans of the proposed Manufactured H ousingCommunity development as required by the City Development C ode.SEC TION 17: A MEND MEN T “11.03.060 A ccess” of the RexburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T11.03.060 A ccessAll public streets shall be constructed per current City Engineering Standards. Accesses shallhave the following minimum pavement widths if the streets are privately owned andmaintained:
A.Pavement Widths.
1.Public Street A ccess. A Manufactured H ousing Community shall not be
established on any site that does not have access to a public street on w hich
the potential paving width is less than forty (40’) feet.
2.Entrance Street and collectors with guest/community parking on both sides2.Entrance Street and collectors with guest/community parking on both sides
shall be no less than forty-four (44’) feet with curb and gutter.
3.Collector Streets.
a.Parking on 1 Side. Collector streets w ith parking on one side shall be
no less than thirty-six (36’) feet w ide.
b.N o Parking. Collector streets w ith no parking shall be no less than
tw enty-four (24’) feet.
4.Minor Street. Minor Streets w ith no parking shall be no less than tw enty-four
(24’) feet
5.Cul-de-Sacs.
a.R adius Minimums. Cul-de-sacs shall have a minimum radius of no
less than thirty-five (35’) feet with no parking and forty-five (45’) feet
w ith allowed parking and shall be no less than tw enty-four (24’) feet
w ide.
6.Roadw ay Surfacing. Roadw ays within access ways and sidew alks shall be
paved with a gravel base and asphaltic or concrete surfacing according to
structural specifications established by the City Engineer.
SEC TION 18: A MEND MEN T “11.03.070 B uffering” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.070 B uffering
A sight-obscuring fence or wall of not less than six (6’) feet nor more than eight (8’) feet in
height, and/or evergreen planting of not less than six (6’) feet in height, shall surround the
Manufactured H ome C ommunity.
A.O ther considerations such as berms, deciduous bushes, or other landscaping options
may be allowed as approved by the City of R exburg D esign Review Committee.
SEC TION 19: A MEND MEN T “11.03.080 Electricity” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.080 Electricity
A.C ompliance
1.All electrical must meet the Electrical Code as adopted by the C ity of
Rexburg. .
2.Entrance Street and collectors with guest/community parking on both sidesshall be no less than forty-four (44’) feet with curb and gutter.3.Collector Streets.a.Parking on 1 Side. Collector streets w ith parking on one side shall beno less than thirty-six (36’) feet w ide.b.N o Parking. Collector streets w ith no parking shall be no less thantwenty-four (24’) feet.4.Minor Street. Minor Streets w ith no parking shall be no less than tw enty-four(24’) feet5.Cul-de-Sacs.a.R adius Minimums. Cul-de-sacs shall have a minimum radius of noless than thirty-five (35’) feet with no parking and forty-five (45’) feetwith allowed parking and shall be no less than tw enty-four (24’) feetwide.6.Roadw ay Surfacing. Roadw ays within access ways and sidew alks shall bepaved with a gravel base and asphaltic or concrete surfacing according tostructural specifications established by the City Engineer.SEC TION 18: A MEND MEN T “11.03.070 B uffering” of the RexburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T11.03.070 B ufferingA sight-obscuring fence or wall of not less than six (6’) feet nor more than eight (8’) feet inheight, and/or evergreen planting of not less than six (6’) feet in height, shall surround theManufactured H ome C ommunity.A.O ther considerations such as berms, deciduous bushes, or other landscaping optionsmay be allowed as approved by the City of R exburg D esign Review Committee.SEC TION 19: A MEND MEN T “11.03.080 Electricity” of the RexburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T
11.03.080 Electricity
A.C ompliance
1.All electrical must meet the Electrical Code as adopted by the C ity of
Rexburg. .Rexburg. .
B.Lights. All drivew ays, access w ays, and w alkw ays within the Manufactured H ousing
Community shall be lighted at night (from one hour after sundow n to one hour before
sun up) each spaced at intervals of not more than one-hundred (100’) feet.
SEC TION 20: A MEND MEN T “11.03.090 Improvement R equirements” of
the Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.03.090 Improvement R equirements
SEC TION 21: A MEND MEN T “11.03.100 Land Area” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.100 Land Area
The minimum area of any Manufactured H ousing community is four (4) acres.
SEC TION 22: A MEND MEN T “11.03.110 Recreation A rea” of the R exburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.110 Recreation A rea
A minimum of eight (8%) percent of gross Manufactured Housing Community area shall be
reserved for recreation.
A.Location. The recreation area may be in one (1) or more locations in the community.
B.A rea. A t least one (1) recreation area shall have a minimum size of five thousand
(5,000) square feet
C.Shape. The shape of the recreation areas should be such to make it usable for its
intended purpose.
SEC TION 23: A MEND MEN T “11.03.120 Setbacks” of the R exburg
Development C ode is hereby am ended as follows:
Rexburg. .B.Lights. All drivew ays, access w ays, and w alkw ays within the Manufactured H ousingCommunity shall be lighted at night (from one hour after sundow n to one hour beforesun up) each spaced at intervals of not more than one-hundred (100’) feet.SEC TION 20: A MEND MEN T “11.03.090 Improvement R equirements” ofthe Rexburg Development Code is hereby amended as follow s:A M E N D M E N T11.03.090 Improvement R equirementsSECTION 21: A MEND MEN T “11.03.100 Land Area” of the RexburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T11.03.100 Land AreaThe minimum area of any Manufactured H ousing community is four (4) acres.SEC TION 22: A MEND MEN T “11.03.110 Recreation A rea” of the R exburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T11.03.110 Recreation A reaA minimum of eight (8%) percent of gross Manufactured Housing Community area shall bereserved for recreation.A.Location. The recreation area may be in one (1) or more locations in the community.B.A rea. A t least one (1) recreation area shall have a minimum size of five thousand(5,000) square feet
C.Shape. The shape of the recreation areas should be such to make it usable for its
intended purpose.
SEC TION 23: A MEND MEN T “11.03.120 Setbacks” of the R exburg
Development C ode is hereby am ended as follows:Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.120 Setbacks
The follow ing minimum yard requirements shall apply in a Manufactured Housing
Community:
A.Public Street Frontage. The Manufactured H ousing Community shall have a
minimum front yard of at least tw enty (20’) feet from right-of-w ay
B.Side and R ear Yard. The minimum depth of a side and rear yard shall be fifteen (15’)
feet.
SEC TION 24: A MEND MEN T “11.03.130 Sign Regulations” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.03.130 Sign Regulations
(See section 3.5.)
Adequate signs and marks indicating direction, community areas, recreation areas, and street
names shall be established and maintained in the Manufactured Housing Community.
SEC TION 25: A MEND MEN T “11.03.140 Space Required Between
Manufactured/Mobile H omes” of the Rexburg Development Code is hereby amended as
follow s:
A M E N D M E N T
11.03.140 Space Required Between Manufactured H omes
Minimum space requirements between Manufactured Homes :
A.End to end, fourteen (14’) feet;
B.Side to side, tw enty (20’) feet;
C.Temporary or permanent structures situated in one (1) space shall be separated by at
least ten (10’) feet from temporary or permanent structure or Manufactured/Mobile
H omes in an adjoining space;
D.D istance from the sidewalk to a home, five (5’) feet.
Development C ode is hereby am ended as follows:A M E N D M E N T11.03.120 SetbacksThe follow ing minimum yard requirements shall apply in a Manufactured HousingCommunity:A.Public Street Frontage. The Manufactured H ousing Community shall have aminimum front yard of at least tw enty (20’) feet from right-of-w ayB.Side and R ear Yard. The minimum depth of a side and rear yard shall be fifteen (15’)feet.SEC TION 24: A MEND MEN T “11.03.130 Sign Regulations” of theRexburg Development Code is hereby amended as follow s:A M E N D M E N T11.03.130 Sign Regulations(See section 3.5.)Adequate signs and marks indicating direction, community areas, recreation areas, and streetnames shall be established and maintained in the Manufactured Housing Community.SEC TION 25: A MEND MEN T “11.03.140 Space Required BetweenManufactured/Mobile H omes” of the Rexburg Development Code is hereby amended asfollows:A M E N D M E N T11.03.140 Space Required Between Manufactured H omesMinimum space requirements between Manufactured Homes :A.End to end, fourteen (14’) feet;B.Side to side, tw enty (20’) feet;
C.Temporary or permanent structures situated in one (1) space shall be separated by at
least ten (10’) feet from temporary or permanent structure or Manufactured/Mobile
H omes in an adjoining space;
D.D istance from the sidewalk to a home, five (5’) feet.
SEC TION 26: A MEND MEN T “11.03.150 Walkw ays” of the Rexburg
Development C ode is hereby am ended as follows:
A M E N D M E N T
11.03.150 Walkw ays
Walkw ays shall be provided from each Manufactured Home space to the service building and
recreational area or areas, and from the patio to the access w ay.
A.C ommon. Common w alkw ays shall have a minimum w idth of five (5’) .feet
B.Private. Private w alkways shall have a minimum w idth of two (2’) feet.
SEC TION 27: A MEND MEN T “11.04.010 Wastewater Management” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.04.010 Wastewater Management
Manufactured H ousing Community wastew ater management systems shall be connected to the
city collection system and comply w ith State and Local plumbing laws and regulations.
A.C onnection. Each Manufactured H ousing space shall be provided w ith at least a four
(4") inch sewer connection.
1.Fittings. The sew er connection shall be provided w ith suitable fittings so that
a w atertight connection can be made between the Manufactured Home drain
and sewer connection.
2.Closure. Each individual Manufactured Home connection shall be so
constructed that they can be closed w hen not connected to a Manufactured,
and shall be trapped in such a manner as to maintain them in an odor free
condition.
B.Wastew ater Metering System. D etermination of the amount of w astew ater
discharged to the city shall be determined by the average w inter w ater usage as
determined by the facility w ater metering system.
SEC TION 28: A MEND MEN T “11.04.020 Water Supply System” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.04.020 Water Supply System
SEC TION 26: A MEND MEN T “11.03.150 Walkw ays” of the RexburgDevelopment C ode is hereby am ended as follows:A M E N D M E N T11.03.150 Walkw aysWalkways shall be provided from each Manufactured Home space to the service building andrecreational area or areas, and from the patio to the access w ay.A.C ommon. Common w alkw ays shall have a minimum w idth of five (5’) .feetB.Private. Private w alkways shall have a minimum w idth of two (2’) feet.SEC TION 27: A MEND MEN T “11.04.010 Wastewater Management” of theRexburg Development Code is hereby amended as follow s:A M E N D M E N T11.04.010 Wastewater ManagementManufactured H ousing Community wastew ater management systems shall be connected to thecity collection system and comply w ith State and Local plumbing laws and regulations.A.C onnection. Each Manufactured H ousing space shall be provided w ith at least a four(4") inch sewer connection.1.Fittings. The sew er connection shall be provided w ith suitable fittings so thata w atertight connection can be made between the Manufactured Home drainand sewer connection.2.Closure. Each individual Manufactured Home connection shall be soconstructed that they can be closed w hen not connected to a Manufactured,and shall be trapped in such a manner as to maintain them in an odor freecondition.B.Wastew ater Metering System. D etermination of the amount of w astew aterdischarged to the city shall be determined by the average w inter w ater usage asdetermined by the facility w ater metering system.
SEC TION 28: A MEND MEN T “11.04.020 Water Supply System” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.04.020 Water Supply System
An accessible, adequate, safe and potable central supply of w ater shall be provided in each
Manufactured H ousing Community.
A.Backflow. The w ater supply system shall be protected from back flow as required by
the city’s back flow protection ordinance.
1.The use of ordinary stop and w aste valves w here back flow can occur into the
potable w ater system are prohibited.
B.C ity Water. The proposed facility shall be connected to the city w ater system unless
special conditions granted by the city allow for a local community system.
C.C onnections. Individual water service connections w hich are provided for direct use
by the Manufactured Home shall be so constructed that they w ill not be damaged by
the moving of the homes.
1.Isolated. Connections are to be constructed and isolated so that they w ill not
freeze if they are connected to a home or not.
D.Fire Protection. The water supply system shall be able to provide fire protection as
required by local codes and ordinances. Fire hydrants shall be located as required by
the U niform Fire Code as adopted by the city.
E.Maintenance. The w ater system w ithin the facility is to be maintained by the owner
of the facility and shall be operated in accordance w ith existing law s.
F.Meter. The w ater system for the Manufactured H ousing C ommunity shall be metered
at the connection to the city system or as determined by the City Engineering
D epartment.
G.Piping. All water piping shall be constructed and maintained in accordance with State
and Local law.
H.Water Mains. The design and extension of w ater mains shall conform to existing city
requirements.
SEC TION 29: A MEND MEN T “11.04.040 R efuse Containers” of the
Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.04.040 R efuse Containers
All refuse shall be stored in fly tight, watertight, rodent proof containers w hich shall be located
not more than one hundred fifty (150') feet from Manufactured H ome space.
A.They shall be provided in sufficient number and capacity to prevent any refuse from
overflow ing.
B.D umpsters are to be enclosed as per the requirements of the C ity D evelopment Code.
SEC TION 30: A MEND MEN T “11.04.050 Fire Protection Requirements” of
An accessible, adequate, safe and potable central supply of w ater shall be provided in eachManufactured H ousing Community.A.Backflow. The w ater supply system shall be protected from back flow as required bythe city’s back flow protection ordinance.1.The use of ordinary stop and w aste valves w here back flow can occur into thepotable w ater system are prohibited.B.C ity Water. The proposed facility shall be connected to the city w ater system unlessspecial conditions granted by the city allow for a local community system.C.C onnections. Individual water service connections w hich are provided for direct useby the Manufactured Home shall be so constructed that they w ill not be damaged bythe moving of the homes.1.Isolated. Connections are to be constructed and isolated so that they w ill notfreeze if they are connected to a home or not.D.Fire Protection. The water supply system shall be able to provide fire protection asrequired by local codes and ordinances. Fire hydrants shall be located as required bythe U niform Fire Code as adopted by the city.E.Maintenance. The w ater system w ithin the facility is to be maintained by the ownerof the facility and shall be operated in accordance w ith existing law s.F.Meter. The w ater system for the Manufactured H ousing C ommunity shall be meteredat the connection to the city system or as determined by the City EngineeringDepartment.G.Piping. All water piping shall be constructed and maintained in accordance with Stateand Local law.H.Water Mains. The design and extension of w ater mains shall conform to existing cityrequirements.SEC TION 29: A MEND MEN T “11.04.040 R efuse Containers” of theRexburg Development Code is hereby amended as follow s:A M E N D M E N T11.04.040 R efuse ContainersAll refuse shall be stored in fly tight, watertight, rodent proof containers w hich shall be locatednot more than one hundred fifty (150') feet from Manufactured H ome space.
A.They shall be provided in sufficient number and capacity to prevent any refuse from
overflow ing.
B.D umpsters are to be enclosed as per the requirements of the C ity D evelopment Code.
SEC TION 30: A MEND MEN T “11.04.050 Fire Protection Requirements” ofSECTION 30: A MEND MEN T “11.04.050 Fire Protection Requirements” of
the Rexburg Development Code is hereby amended as follow s:
A M E N D M E N T
11.04.050 Fire Protection Requirements
A.The community area shall be subject to the rules and regulations of the Rexburg C ity
Fire Department.
B.Manufactured Housing Community areas shall be kept free of litter, rubbish, and other
flammable materials.
C.Fires shall be made only in stoves, incinerators and other equipment intended for such
purposes.
D.N o open fires shall be permitted in any Manufactured H ousing community in any
place w here the same shall endanger life or property.
SEC TION 31: A MEND MEN T “11.04.060 Liquefied Petroleum G as
Restrictions” of the Rexburg D evelopment Code is hereby amended as follow s:
A M E N D M E N T
11.04.060 Liquefied Petroleum G as Restrictions
Liquefied petroleum gas for cooking purposes shall not be used at individual home spaces
unless the containers are properly connected by copper or other suitable metallic tubing.
A.Liquefied petroleum gas cylinders shall be so fastened in place, and shall be
adequately protected from the w eather.
B.N o cylinder containing liquefied petroleum gas shall be located in a Manufactured
H ome nor w ithin five (5’) feet of a door thereof.
SEC TION 30: A MEND MEN T “11.04.050 Fire Protection Requirements” ofthe Rexburg Development Code is hereby amended as follow s:A M E N D M E N T11.04.050 Fire Protection RequirementsA.The community area shall be subject to the rules and regulations of the Rexburg C ityFire Department.B.Manufactured Housing Community areas shall be kept free of litter, rubbish, and otherflammable materials.C.Fires shall be made only in stoves, incinerators and other equipment intended for suchpurposes.D.N o open fires shall be permitted in any Manufactured H ousing community in anyplace w here the same shall endanger life or property.SEC TION 31: A MEND MEN T “11.04.060 Liquefied Petroleum G asRestrictions” of the Rexburg D evelopment Code is hereby amended as follow s:A M E N D M E N T11.04.060 Liquefied Petroleum G as RestrictionsLiquefied petroleum gas for cooking purposes shall not be used at individual home spacesunless the containers are properly connected by copper or other suitable metallic tubing.A.Liquefied petroleum gas cylinders shall be so fastened in place, and shall beadequately protected from the w eather.B.N o cylinder containing liquefied petroleum gas shall be located in a ManufacturedHome nor w ithin five (5’) feet of a door thereof.
AYE NAY ABSENT A BSTA IN
C ouncil President Jordan Busby
C ouncilmember Robert C hambers
C ouncilmember Tisha Flora
C ouncilmember Colin Erickson
C ouncilmember Mikel Walker
C ouncilmember Bryanna Johnson
PA SSED AN D AD OPTED BY TH E CITY O F REX B U R G COU N CIL JU NE 07, 2023.
X
X
X
X
X
X
P r e s id in g O ffic e r
A t t e s t
Jerry L Merrill, Rexburg Mayor, City
of Rexburg
D eborah Lovejoy, Rexburg City Clerk,
C ity of Rexburg