HomeMy WebLinkAboutMETHOD SPECIFICATIONS - 23-00046 - 240 E Moody - Wendy's - New BuildingInspection Details
Date Contractor Inspector Weather Ambient
Temperature (°F)
Permit Number
05/01/2023 Construction
Solutions
Neibaur, Ricardo Sunny 81 2300046
Compaction Equipment
Model:Weight/Vibration Number of Tires Speed (mph)
N/A N/A 2 1
Method Specification Inspection
Test #Location or
Station
Elevation Material
Placed
Lift
Thickness(in)
# of Full
Passes
Density (pcf)
(if applicable)
In
Compliance
1 Southeast
side of jobsite
within
concrete
foundation
8 Inches
below top of
foundation
Pit run 12 12 N/A Yes
Material Tested per:
ISPWC 2023.8C3 Atlas Geotechnical Report Other Source (Material located in Notes Section)
Notes:
The specifications were not provided nor found by Atlas Rep. (Rick) Since the roller appeared the roller looked to meet ISPWC
requirements, therefore contractor (Josh) elected to move forward following thr bare minimum requirements per ISPWC. Email has
been sent to all approved recipients.
✔
Method Specification 00Report #:
05/01/2023Report Date:
Atlas Technical Consultants, LLC Idaho
Falls
1753 E Precision Drive
Idaho Falls, ID 83402
Phone: (208) 5298242
Client:
Classic Foods, Inc.
1585 N. Skyline Drive
Idaho Falls, ID 83402
Project:
E230566l
Wendy's Rexburg, Moody Rd & N. 2nd E.,
Rexburg, ID
240 E Moody Road
Rexburg, ID 83440
This report shall not be reproduced, in full, without prior written approval of Atlas Technical Consultants, LLC.
Results only relate to the items inspected or tested.
Page 1 of 2Page 1 of 1