HomeMy WebLinkAboutAPPROVED PLANS - 20-00554 - Sinclair - Fueling ShedAuthor Name Author Email Author Phone No.:
Ted Dye tedd@rexburg.org 208-372-2172
Description : Sinclair - Fueling Shed
Address : 499 S Yellowstone Hwy
Record Type : Commercial - Remodel
Document Filename : Sinclair-Fueling Shed.PDF
Comment Author Contact Information:
Corrections in the following table need to be applied before a permit can be issued
Review Report
Approved
# 20-00554
Page Reference Annotation
Type
Author : Department Status Page Review Comments Applicant Response Comments
2 Callout Ted Dye : Building Open 2 At 12"in from the center pole the measurement of the tread
must be 7-1/2" wide.
The treads must be identical and have a rise of no more than
9-1/2".
Minimum headroom is 6'-6"
4 Callout Ted Dye : Building Open 4 Guard must be 42" in the closed position
6 Free text Ted Dye : Building Open 6 Special conditions for circular, spiral and winder stairways and
bulkhead enclosures R311.7.9.1
Commercial - Remodel
Approval of plans does not constitute approval of variance from code
Powered by TCPDF (www.tcpdf.org)
SOLIDWORKS Educational Product. For Instructional Use Only.
BB
24.000
R30.000
61.000
31.750
105.750
118.000
92.000
32.000
4.500
16.000
SECTION B-B
SCALE 1 : 20
all steps and platfourms willhave a metal graiting
SOLIDWORKS Educational Product. For Instructional Use Only.
At 12"in from the center pole the
measurement of the tread must
be 7-1/2" wide.
The treads must be identical and
have a rise of no more than 9-1/2".
Minimum headroom is 6'-6"
120.000
209.250
104.000 12.000
4.000
72.000
32.000
42.000
48.000
83.000
30.000 18.000
106.250
103.000
SOLIDWORKS Educational Product. For Instructional Use Only.
60.000
209.250
217.131
180.131
148.000
32.250
12.000
4.000
this platform will hinge
up and down so the truck
can access this area
SOLIDWORKS Educational Product. For Instructional Use Only.
Guard must be 42" in the
closed position
0
.
8
8
i
n
39.750
111.250
8.188
46.778
181.000
12.000
3.000
SOLIDWORKS Educational Product. For Instructional Use Only.
8.188
61.161
SOLIDWORKS Educational Product. For Instructional Use Only.
Special conditions for circular, spiral and
winder stairways and bulkhead
enclosures R311.7.9.1