HomeMy WebLinkAboutSAMMY SCREWS - 23-00006 - Hibbard Elemenatry - Fire Sprinkler4 For the most up to date information, visit www.itwbuildex.com
Wood Flooring
Wood Joist
Double Sheetrock
Ceiling
Approvals Rod
Size
Part
Number Model Screw
Descriptions
Ultimate
Pullout (lbs)
UL Test
Load (lbs)
FM Test
Load (lbs)
Box
Qty
Case
Qty
VERTICAL MOUNT
1/4" 8002957 GST 100 1/4 x 1"
210 (7/16” OSB)
670 (3/4” Ply)25 125
1/4" 8003957 GST 200 1/4 x 2" 1760 (Fir)25 125
3/8" 8007957 GST 10 1/4 x 1"
210 (7/16” OSB)
670 (3/4” Ply)300 25 125
3/8" 8008957 GST 20 1/4 x 2" 1760 (Fir) 850 1475 25 125
3/8" 8068925 GST 20-SS 1/4 x 2" 1760 (Fir) 850 25 125
3/8" 8009925 GST 25-380 3/8 x 2-1/2" 2113 (Fir) 1500 25 125
3/8" 8010957 GST 30 1/4 x 3" 2060 (Fir) 1500 1475 25 125
1/2" 8013925 GST 2 1/4 x 2" 1760 (Fir)25 125
1/2" 8015925 GST 3 1/4 x 3" 2275 (Fir)25 125
Not less than
2” nominal width
(1-1/2”)
Not less than
3” nominal
thickness (2-1/2”)
(depth or side
of vertical member)
#14 Black
Nut Driver
Part # 8113910
SPECIAL NUT DRIVER SYSTEM: The nut drivers were designed with a unique spin-off feature which provides a fast and safe installation each time. When the face of the driver comes into
contact with the material you are installing into, continue drilling until nut driver spins free. Installation is then complete. Warranty requires the use of the appropriate nut driver for installations.
#14 SW Red
Nut Driver
Part # 8114910
Composite / Truss
Consult truss manufacturer for
recommended installation point.
*Pre-drilling may be required for GST
25-380 . Tool available on page 11.
For vertical use -
install in center of lower face.
Minimum 2” embedment into base
material for NFPA 13 compliance.
• No pre-drilling required.
• Quick to install using the Sammy
Nut Driver with an 18V cordless
drill.
• Saves time from traditional
methods.
• Reduces installation costs.
• Assembled in the U.S.A.
SAMMYS® FOR WOOD
Application Product Features
SAMMYS® FOR WOOD - Vertical Application
ASSEMBLED U.S.A.
View our
installation videos!
5 7R¿QGDGLVWULEXWRUQHDU\RXFDOOSTEELSTEELWOODAPPROVALSACCESSORIESCONCRETENot less than 2” nominal width
(1-1/2”) up to 3-1/2” pipe; not less than
3” (2-1/2”) nominal width 4” & 5” pipe
Minimum 2-1/2” from bottom for
branch lines. Minimum 3” from bot-
WRPIRUPDLQOLQHV([FHSWLRQ 7KLV
requirement shall not apply to 2” or
thicker nailing strips resting on top of
steel beams.
Floor Joist
Approvals Rod
Size
Part
Number Model Screw
Descriptions
Ultimate
Shear (lbs)
UL Test
Load (lbs)
Box
Qty
Case
Qty
HORIZONTAL MOUNT
3/8" 8020957 SWG 10 1/4 x 1" 622 (Fir) 300 25 125
3/8" 8021957 SWG 20 1/4 x 2" 1725 (Fir) 1050 25 125
3/8" 8022925 SWG 25-380 3/8 x 2-1/2" 2249 (Fir) 1500 25 125
3/8"* 8023925 SWG 30 1/4 x 3" 1884 (Fir) 25 125
#14 SW Red
Nut Driver
Part # 8114910
• No pre-drilling required.
• Quick to install using the Sammy
Nut Driver with an 18V cordless
drill/driver.
• Saves time from traditional
methods.
• Reduces installation costs.
• Assembled in the U.S.A.
Approvals Rod
Size
Part
Number Model Screw
Descriptions
Ultimate
Pullout (lbs)
UL Test Load
(lbs)
FM Test
Load (lbs)
Min
Thickness
Box
Qty
Case
Qty
SWIVEL MOUNT
3/8" 8139957 SH-GST 20 1/4 x 2" 1257 (Fir) 1050 1475 25 125
3/8"* 8269957 SH-GST/CST 20 5/16 x 1-3/4”
1903 Dim. Lumber
1406 @ 45°off vertical
Dim. Lumber
1500
850 @ 45°25 125
#14 Black
Nut Driver
Part # 8113910
• Eliminates distortion of threaded rod.
• Accommodates up to 3 ½” x 12 pitch roof.
•$OORZVGHÀHFWLRQIURPYHUWLFDO
• Saves time from traditional methods. • Reduces installation costs.
• Assembled in the U.S.A.
Application Product Features
Application Product Features
Composite / Truss
Consult truss manufacturer for
recommended installation point.
*Pre-drilling may be required for Model
SWG 25-380. Tool available on page 11.
SIDEWINDER® FOR WOOD - Horizontal Application
SAMMYS SWIVEL HEAD™ FOR WOOD - Swivel Application
#14 SH Orange
Nut Driver
Part # 8273910
* May require pre-drilling; consult joist manufacturer.
** Will not swivel until installed with black nut driver.
View our
installation videos!