Loading...
HomeMy WebLinkAboutFA HORN STROBES - 22-00502 - Mountain West Rental and Sales.pdfGAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1653 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2006 Honeywell International Inc. All rights reserved.www.gamewell-fci.com CS-2539 Rev. A page 1 of 4 SpectrAlert® Advance Selectable Output Notification AppliancesDescription SpectrAlert ® Advance selectable-output horns, strobes and horn/strobes are rich with features guaranteed to decrease installation times and maximize profits. The SpectrAlert Advance series of notification appliances is designed to simplify your installations, with features such as: plug-in designs, instant feedback messages to ensure correct installation of individual devices, and eleven (11), field- selectable candela settings for wall, ceiling strobes and horn/strobes. More specifically, when installing Advance products, first attach a universal mounting plate to a four-inch square, four-inch octagon, or double-gang junction box. The two- wire mounting plate attaches to a single-gang junction box. Then, connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate. Finally, attach the horn, strobe, or horn/strobe to the mounting plate by inserting the product’s tabs in the mount- ing plate’s grooves. The device will rotate into position, locking the product’s pins into the mounting plate’s termi- nals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw. SpectrAlert Advance products offer the following options: • 12 or 24 volts. • At 24 volts, 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, or 185 candela by way of rear-mounted slide switch and front viewing window. • Horn tones and volume by way of rotary switch. The SpectrAlert Advance series includes outdoor notifica- tion appliances. Outdoor strobes and horn/strobes (two- wire and four-wire) are available for wall or ceiling. Outdoor horns are available for wall only. All System Sensor out- door products are rated between –40°F and 151°F (–40°C and 66°C) in wet or dry applications. Sync•Circuit™ is a trademark, and SpectrAlert® and System Sensor® are registered trade-marks of Honeywell International Inc. ©2006 by ADT. All rights reserved. Unauthorized use of this document is strictly prohibited. Features • Plug-in design. • Same mounting plate for wall- and ceiling-mount units. • Shorting spring on mounting plate for continuity check before installation. • Captive mounting screw. • Tamper-resistance capability. • Field-selectable candela settings on wall or ceiling units: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, 185. • Automatic selection of 12 or 24 volt operation at 15 and 15/75 candela. • Outdoor wall and ceiling products. • Outdoor products rated from –40°F and 151°F (–40°C and 66°C). • Minimal intrusion into the backbox. • Horn rated at 88+ dbA at 16 volts. • Rotary switch for tone selection. • Three horn volume settings. • Electrically compatible with SpectrAlert ® products. 7087pho1.jpg Indoor Ceiling Horn/Strobe Outdoor Ceiling Strobe 7087pho2.jpg 7087pho3.jpg Indoor Wall Horn/Strobe 7087pho4.jpg Indoor Ceiling Strobe Indoor Wall Horn 7087pho5.jpg Outdoor Wall Strobe 7087pho6.jpg An ISO 9000-2000 Company 7125-1653:188 SIGNALING MEA Approved 452-05-ES4011 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1653 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 CS-2539 Rev. A page 2 of 4 www.gamewell-fci.com Models available: • Indoor wall-mount: horn, strobe, 2-wire horn/strobe, 4-wire horn/strobe. • Indoor ceiling-mount: strobe, 2-wire horn/strobe, 4-wire horn/strobe. • Outdoor wall-mount: horn, strobe, 2-wire horn/strobe, 4-wire horn/strobe. • Outdoor ceiling-mount: strobe, 2-wire horn/strobe, 4-wire horn/strobe. Engineering Specifications SpectrAlert Advance horns, strobes, and horn/strobes shall mount on a standard 4.0" x 4.0" x 1.5" (10.16 x 10.16 x 3.81 cm) backbox, 4.0" (10.16 cm) octagonal backbox, or a double- gang backbox. Two-wire products shall also mount on a single-gang 2.0" x 4.0" x 1.875" (5.08 x 10.16 x 4.763 cm) back- box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt rated notification appliance circuit outputs shall operate between 9 and 17.5 volts; 24- volt rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance prod- ucts shall operate between 32°F and 120°F (0°C and 49°C) from a regulated DC, or full-wave-rectified, unfiltered power supply. Strobes and horn/strobes shall have field-select- able candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, 185. Strobe The strobe shall be a System Sensor SpectrAlert Advance Model _______ Listed to UL STD 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act require- ments for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/ reflector system. Horn/Strobe Combination The horn/strobe shall be a System Sensor SpectrAlert Advance Model _______ Listed to UL Standards 1971 and 464 and shall be approved for fire protective service. The horn/strobe shall be wired as a primary-signaling notifica- tion appliance and comply with the Americans with Disabil- ities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a Temporal 3 pattern and a Non-Temporal (continuous) pat- tern. These options are set by a multiple position switch. On four-wire products, the strobe shall be powered inde- pendently of the sounder. The horn on horn/strobe models shall operate on a coded or non-coded power supply. Outdoor Products SpectrAlert Advance outdoor horns, strobes and horn/ strobes shall be listed for outdoor use by UL and shall operate between –40°F and 151°F (–40°C and 66°C). The products shall be listed for use with a System Sensor out- door/weatherproof backbox with half-inch and three- fourths-inch conduit entries. Synchronization Module The module shall be a System Sensor Sync•Circuit _______ Listed to UL STD 464 and shall be approved for fire protective service. The module shall synchronize Spec- trAlert strobes at 1 Hz and horns at Temporal 3. Also, while operating the strobes, the module shall silence the horns on horn/strobe models over a single pair of wires. The module shall mount to a 4.688" x 4.688" x 2.125" (11.906 x 11.906 x 5.398 cm) backbox. The module shall also control two Style Y (Class B) circuits or one Style Z (Class A) cir- cuit. The module shall synchronize multiple zones. Daisy- chaining two or more synchronization modules together will synchronize all the zones the modules control. The module shall not operate on a coded power supply. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1653 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com CS-2539 Rev. A page 3 of 4 Strobe Current Draw, UL Maximum (mA RMS) Horn Current Draw, UL Maximum (mA RMS) Horn and Horn/Strobe Rotary Switch Setting) Horn and Horn/Strobe Output (dBA) Operating Specifications Standard operating temperature:32° F to 120° F (0° C to 49° C) K Series operating temperature:-40° F and 151° F (-40° C and 66° C) Humidity range:10% to 93% non-condensing (indoor products). Strobe flash rate:1 flash per second. Nominal voltage:regulated 12 VDC/FWR or regu- lated 24 VDC.FWR. Note: Full Wave Recitified (FWR) voltage is a non-regulated, time- varying power source that is used on some power supply and panel outputs. Operating voltage range:8 V to 17.5 V (12 V nominal); or 16 V to 33 V (24 V nominal). Note: P, S, PC, and SC products will operate at 12 V nominal only for 15 cd and 15/75 cd. Input terminal wire gauge:12 to 18 AWG (3.31 to 0.821 mm2). Ceiling-mount dimensions (including lens):6.8” diameter x 2.5” deep (17.3 diameter x 6.4 deep cm) Wall-mount dimensions (including lens):5.6” H x 4.7” W x 2.5” D (14.2 H x 11.9 W x 6.4 D cm) Horn dimensions:5.6” H x 4.7” W x 1.3” D (14.2 H x 11.9 W x 3.3 D cm) 8 - 17.5 V 16 - 33 V Candela DC FWR DC FWR Standard Candela Range 15 123 128 66 71 15/75 142 148 77 81 30 NA NA 94 96 75 NA NA 158 153 95 NA NA 181 176 110 NA NA 202 195 115 NA NA 210 205 High Candela Range 135 NA NA 228 207 150 NA NA 246 220 177 NA NA 281 251 185 NA NA 286 258 Sound Pattern dB 8 - 17.5 V 16 - 33 V DC FWR DC FWR Temporal High 57 55 69 75 Temporal Medium 44 49 58 69 Temporal Low 38 44 44 48 Non-temporal High 57 56 69 75 Non-temporal Medium 42 50 60 69 Non-temporal Low 41 44 50 50 Coded High 57 55 69 75 Coded Medium 44 51 56 69 Coded Low 40 46 52 50 Setting Repetition Rate dB Level 1 Temporal Horn High 2 Temporal horn Medium 3 Temporal horn Low 4 Normal horn Low 5 Normal horn Medium 6 Normal horn Low 7* Externally coded High 8* Externally coded Medium 9* Externally coded Low *NOTE: Settings 7, 8 and 9 are not available on 2-wire horn/strobe Switch Position Sound Pattern dB 8 - 17.5 V 16 - 33 V DC FWR DC FWR 1 Temporal High 78 78 84 84 2 Temporal Medium 74 74 80 80 3 Temporal Low 71 73 76 76 4 Non-temporal High 82 82 88 88 5 Non-temporal Medium 78 78 85 85 6 Non-temporal Low 75 75 81 81 7* Coded High 82 82 88 88 8* Coded Medium 78 78 85 85 9* Coded Low 75 75 81 81 *NOTE: Settings 7, 8, and 9 are not available on 2-wire horn/strobe. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1653 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 CS-2539 Rev. A page 4 of 4 www.gamewell-fci.com Two-Wire Horn/Strobe, STANDARD Candela Range (15 - 115 cd), UL Maximum Current Draw (mA RMS) Input, Sound Pattern, dB Level 8 - 17.5 V 16 - 33 V 15 15/75 15 15/75 30 75 95 1101 115 DC Input, Temporal High 137 147 79 90 107 176 194 212 218 DC Input, Temporal, Medium 132 144 69 80 97 157 182 201 210 DC Input, Temporal, Low 132 143 66 77 93 154 179 198 207 DC Input, Non-temporal, High 141 152 91 100 116 176 201 221 229 FWR Input, Non-temporal Medium 133 145 75 85 102 163 187 207 216 DC Input, Non-temporal, Low 131 144 68 79 96 156 182 201 210 FWR Input, Temporal, High 136 155 88 97 112 168 190 210 218 FWR Input, Temporal, Medium 129 152 78 88 103 160 184 202 206 FWR Input, Temporal, Low 129 151 76 86 101 160 184 194 201 FWR Input, Non-temporal, High 142 161 103 112 126 181 203 221 229 FWR Input, Non-temporal, Medium 134 155 85 95 110 166 189 208 216 FWR Input, Non-temporal, Low 132 154 80 90 105 161 184 202 211 Two-Wire Horn/Strobe, HIGH Candela Range (135 - 185 cd), UL Maximum Current Draw (mA RMS DC Input 16 - 33 V 16 - 33 V 135 150 177 185 FWR Input 135 150 177 185 DC, Temporal High 245 259 290 297 FWR, Temporal, High 215 231 258 265 DC, Temporal Medium 235 253 288 297 FWR, Temporal, Medium 209 224 250 258 DC, Temporal Low 232 251 282 292 FWR, Temporal, Low 207 221 248 256 DC, Non-temporal, High 255 270 303 309 FWR, Non-temporal, High 233 248 275 281 DC, Non-temporal, Medium 242 259 293 299 FWR, Non-temporal, Medium 219 232 262 267 DC, Non-temporal, Low 238 254 291 295 FWR, Non-temporal, Low 214 229 256 262 Ordering Information: Model Description Model Description WALL HORNS/STROBES CEILING HORN/STROBES P2R 2-wire horn/strobe, standard cd, red.PC2R 2-wire horn/strobe, standard cd, red. P2RH 2-wire horn/strobe, high cd, red.PC2RH 2-wire horn/strobe, high cd, red. P2RK 2-wire horn/strobe, standard cd, red, outdoor.PC2RK 2-wire horn/strobe, standard cd, red, outdoor. P2RHK 2-wire horn/strobe, high cd, red, outdoor.PC2RHK 2-wire horn/strobe, high cd, red, outdoor. P2W 2-wire horn/strobe, high cd, white.PC2W 2-wire horn/strobe, standard cd, white. P2WH 2-wire horn/strobe, high cd, white.PC2WH 2-wire horn/strobe, high cd, white. P4R 4-wire horn/strobe, standard cd, red.PC4R 4-wire horn/strobe, standard cd, red. P4RH 4-wire horn/strobe, high cd, red.PC4RH 4-wire horn/strobe, high cd, red. P4RK 4-wire horn/strobe, standard PC4RK 4-wire horn/strobe, standard cd, red, outdoor. P4RHK 4-wire horn/strobe, high cd, red, outdoor.PC4RHK 4-wire horn/strobe, high cd, red, outdoor. P4W 4-wire horn/strobe, standard cd, white.PC4W 4-wire horn/strobe, standard cd, white. P4WH 4-wire horn/strobe, high cd, white PC4WH 4-wire horn/strobe, high cd, white. WALL STROBES CEILING STROBES SR Strobe, standard cd, red.SCR Strobe, standard cd, red. SRH Strobe, high cd, red.SCRH Strobe, high cd, red. SRK Strobe, standard cd, red, outdoor.SCRK Strobe, standard cd, red, outdoor. SRHK Strobe, high cd, red, outdoor.SCRHK Strobe, high cd, red, outdoor. SW Strobe, standard cd, white.SCW Strobe, standard cd, white. SWH Strobe, high cd, white.SCHW Strobe, high cd, white. ACCESSORIES HORNS BBS-2 Backbox skirt, wall, red.HR Horn, red. BBSW-2 Backbox skirt, wall, white.HRK Horn, red, outdoor. BBSC-2 Backbox skirt, ceiling, red.HW Horn, white BBSCW-2 Backbox skirt, ceiling, white. NOTE: “High cd” refers to strobes that include 135, 150, 177, and 185 candela settings. “Standard cd” refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings.