HomeMy WebLinkAboutUNDERGROUND CHILLED WATER PIPING - 22-00163 - BYUI University Operations Bld - Chiller Replacement
377 West 800 North • Salt Lake City, Utah 84103 • Tel: 801.322.0487 • Email: heath@heatheng.com
Randall T. Veigel • Jeffrey S. Anderson • Nolan E. Johnson • Robert J. Kesler • Andrew J. Paskett • Jason Wendel
April 8, 2022
Mr. Mason Lewis
Lewis Corporation
15136 W. Hunziker
Pocatello, ID 83202
RE: BYU-I UO CHILLER REMOVAL
UNDERGROUND CHILLED WATER PIPE AND FITTINGS
SUBMITTAL 330660
Dear Mason,
We have reviewed the above referenced submittal and have the following comments:
UNDERGROUND CHILLED WATER PIPE AND FITTINGS: Nupi. EXCEPTIONS AS NOTED.
1. Provide SDR 11 piping.
Submission of information by the Contractor is taken as evidence that the contractor has pre pared the information
for the specific application and has verified that adequate and complete conditions for installation and subsequent
operation and maintenance will exist.
Engineers review is for general conformance with the design concepts of the pro ject and for general compliance
with the information given in the contract documents. Contractor is responsible for access and clearance code
compliance, work methods and conditions, coordination of trades, safety, all in satisfactory performance of the
work.
We have retained a digital copy for our files.
Sincerely yours,
HEATH ENGINEERING COMPANY
Andrew J. Paskett, P.E.
AJP/ak
Submittal
220 — BYU-I UO Chiller Removal Subject : Underground Chilled Water Pipe -PPR
To Mason Lewis
Lewis Corporation
15136 W. Hunziker
Pocatello, ID 83202
Phone No: 208-238-1202
mason@lcorp.com
Return To JASON OLSON
BINGHAM MECHANICAL, INC.
4400 S. YELLOWSTONE HWY.
IDAHO FALLS, ID 84303
Phone No: 208-522-4484
Mobile: 208-522-4484
Fax No: 208-524-0160
jasonolson@binghammechanical.com
Copy To waylin@lcorp.com;
kenyan@lcorp.com
Contract No: PO 14417
Number : 220-7
Spec Section No :
Submittal Number: 7
Date Sent :
Type : Original Submittal
Method Sent : Email
Reason For Sending : For Approval
Status : To Be Submitted
Details
Line
No Item Copies Date Reference No Description
001 Submittal
Item
33 0660 2.1 Underground Chilled Water Piping - PPR
Notes
See attached submittal as an alternate to ductile iron
Please return submitted items by 3/31/2022.
Signed By:Dated:
Jason Olson
President
Items
Line Number: 1
Item: Submittal Item
Spec Section: 33 0660
Subsection: 2.1
Type: Product Data
Title: Underground Chilled Water Piping - PPR
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10125.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NG 90 ELBOW - SOCKET FUSION NI10125
1 1 0NDD1DH1HL1
L2
L
CODE ND D1 D L1 L2 L H1 H
27NG20 1/2" => 20 mm 0.65 1.14 0.63 1.06 1.64 1.06 1.63
27NG25 3/4" => 25 mm 0.93 1.40 0.63 1.22 1.93 1.22 1.93
27NG32 1" => 32 mm 1.18 1.81 0.79 1.46 2.36 1.46 2.36
27NG40 1" 1/4 => 40 mm 1.42 2.21 0.87 1.69 2.80 1.69 2.79
27NG50 1" 1/2 => 50 mm 1.81 2.76 0.98 2.01 3.39 2.01 3.39
27NG63 2" => 63 mm 2.32 3.47 1.14 2.44 4.17 2.44 4.17
27NG75 2" 1/2 => 75 mm 2.76 3.98 1.30 2.87 4.86 2.87 4.86
27NG90 3" => 90 mm 3.37 4.45 1.46 3.25 5.47 3.25 5.47
27NG110 4" => 110 mm 3.94 5.75 1.69 3.94 6.81 3.94 6.81
27NG125 5" => 125 mm 4.45 6.50 1.87 4.92 8.17 4.92 8.17
Submission of information by the Contractor is taken as
evidence that the contractor has prepared the information for
the specific application and has verified that adequate and
complete conditions for installation and subsequent operation
and maintenance will exist.
Engineers review is for general conformance with the
design concepts of the project and for general compliance with
the information given in the contractor documents. Contractor is
responsible for access and clearance code compliance, work
methods and conditions, coordination of trades, safety, all in
satisfactory performance of the work.
SUBMITTAL REVIEW
NO EXCEPTIONS TAKEN REJECTED – RESUBMIT
EXCEPTIONS AS NOTED REVISE AND RESUBMIT
HEATH ENGINEERING COMPANY
Date _____________ by __________________________04/08/2022 AJP
q
q
q
qX
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10142.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NR REDUCING BUSHING - SOCKET FUSION NI10142
1 3 -4
L DS1L2L1 ND2ND1CODE ND1 S1 ND2 D1 D L1 L2 L
27NR2520 3/4" => 25 mm 0.17 1/2" => 20 mm -1.14 0.75 0.63 1.61
27NR3225 1" => 32 mm 0.21 3/4" => 25 mm -1.38 0.87 0.67 1.73
27NR4032 1" 1/4 => 40 mm 0.26 1" => 32 mm -1.81 0.98 0.79 1.97
27NR5040 1" 1/2 => 50 mm 0.33 1" 1/4 => 40 mm -2.21 1.10 0.87 2.17
27NR6350 2" => 63 mm 0.41 1" 1/2 => 50 mm -2.76 1.26 0.98 2.13
27NR7563 2" 1/2 => 75 mm 0.49 2" => 63 mm -3.27 1.42 1.14 2.91
27NR9075 3" => 90 mm 0.59 2" 1/2 => 75 mm -3.78 1.46 1.34 3.15
27NR11090 4" => 110 mm 0.72 3" => 90 mm -5.12 2.17 1.38 4.33
27NR125110 5" => 125 mm 0.82 4" => 110 mm -5.47 1.97 1.69 4.49
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10142.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NR REDUCING BUSHING - SOCKET FUSION NI10142
2 3 -4ND1ND2L1L2
LD1S1 DCODE ND1 S1 ND2 D1 D L1 L2 L
27NR3220 1" => 32 mm 0.21 1/2" => 20 mm 0.63 1.06 0.87 0.63 1.52
27NR4020 1" 1/4 => 40 mm 0.26 1/2" => 20 mm 0.63 1.14 0.98 0.63 1.77
27NR4025 1" 1/4 => 40 mm 0.26 3/4" => 25 mm 0.83 1.38 0.98 0.67 1.77
27NR5020 1" 1/2 => 50 mm 0.27 1/2" => 20 mm 0.63 1.14 1.10 0.63 2.09
27NR5025 1" 1/2 => 50 mm 0.27 3/4" => 25 mm 0.83 1.38 1.10 0.67 2.09
27NR5032 1" 1/2 => 50 mm 0.27 1" => 32 mm 1.18 1.81 1.10 0.79 2.09
27NR6325 2" => 63 mm 0.41 3/4" => 25 mm 0.83 1.38 1.26 0.67 3.36
27NR6332 2" => 63 mm 0.41 1" => 32 mm 1.18 1.81 1.26 0.79 3.36
27NR6340 2" => 63 mm 0.41 1" 1/4 => 40 mm 1.46 2.21 1.26 0.87 3.36
27NR7520 2" 1/2 => 75 mm 0.49 1/2" => 20 mm 0.76 1.04 1.38 0.63 2.48
27NR7525 2" 1/2 => 75 mm 0.49 3/4" => 25 mm 0.98 1.30 1.34 0.35 2.44
27NR7532 2" 1/2 => 75 mm 0.49 1" => 32 mm 1.10 1.69 1.35 0.81 2.48
27NR7540 2" 1/2 => 75 mm 0.49 1" 1/4 => 40 mm 1.46 2.10 1.36 0.91 2.48
27NR7550 2" 1/2 => 75 mm 0.49 1" 1/2 => 50 mm 1.97 2.60 1.34 0.79 2.32
27NR9050 3" => 90 mm 0.59 1" 1/2 => 50 mm 1.57 2.68 1.40 0.94 2.99
27NR11063 4" => 110 mm 0.72 2" => 63 mm 2.32 3.46 1.81 1.14 3.15
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10142.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NR REDUCING BUSHING - SOCKET FUSION NI10142
3 3 -4ND2ND1L2
LS1
CODE ND1 S1 ND2 D1 D L1 L2 L
27NR9063 3" => 90 mm 0.59 2" => 63 mm ---1.10 2.83
27NR11075 4" => 110 mm 0.72 2" 1/2 => 75 mm ---1.26 3.15
27NR12590 5" => 125 mm 0.82 3" => 90 mm ---1.34 3.94
27NR160110 6" => 160 mm 1.05 4" => 110 mm ---1.50 4.13
27NR160125 6" => 160 mm 1.05 5" => 125 mm ---1.65 4.13
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10149.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NCC END CAP - SOCKET FUSION NI10149
1 1 -1NDDL1
L SCODE ND S D L1 L
27NCC20 1/2" => 20 mm 0.13 1.18 0.67 1.14
27NCC25 3/4" => 25 mm 0.17 1.40 0.71 1.34
27NCC32 1" => 32 mm 0.21 1.77 0.79 1.58
27NCC40 1" 1/4 => 40 mm 0.26 2.13 0.87 1.65
27NCC50 1" 1/2 => 50 mm 0.33 2.60 1.00 1.89
27NCC63 2" => 63 mm 0.41 3.27 1.34 2.21
27NCC75 2" 1/2 => 75 mm 0.49 3.90 1.69 2.40
27NCC90 3" => 90 mm 0.59 4.72 1.46 2.44
27NCC110 4" => 110 mm 0.72 5.83 1.10 2.68
27NCC125 5" => 125 mm 0.82 6.61 1.87 3.17
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10139.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NTR REDUCED TEE - SOCKET FUSION NI10139
1 6 -7
CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H
27NTR252025 3/4"=> 25 mm 3/4"=> 25 mm 1/2"=> 20 mm 0.83 0.83 0.65 1.14 1.38 0.67 0.67 0.63 2.44 1.18 1.87
27NTR253225 3/4"=> 25 mm 3/4"=> 25 mm 1"=> 32 mm 0.83 0.83 0.83 1.81 1.81 0.67 0.67 0.59 2.91 1.49 2.40
27NTR322032 1"=> 32 m m 1"=> 32 mm 1/2"=> 20 mm 1.18 1.18 0.65 1.14 1.81 0.79 0.79 0.63 2.95 1.38 2.28
27NTR322532 1"=> 32 m m 1"=> 32 mm 3/4"=> 25 mm 1.18 1.18 0.83 1.38 1.81 0.79 0.79 0.67 2.95 1.38 2.28
27NTR402040 1"1/4=>40 mm 1"1/4=>40 mm 1/2"=> 20 mm 1.42 1.42 0.65 1.30 2.09 0.95 0.95 0.63 2.91 1.54 2.60
27NTR402540 1"1/4=>40 mm 1"1/4=>40 mm 3/4"=> 25 mm 1.42 1.42 0.83 1.30 2.09 0.95 0.95 0.79 2.91 1.54 2.60
27NTR403240 1"1/4=>40 mm 1"1/4=>40 mm 1"=> 32 mm 1.38 1.38 1.18 2.13 2.13 0.87 0.87 0.79 3.43 1.69 2.76
27NTR502050 1"1/2=>50 mm 1"1/2=>50 mm 1/2"=> 20 mm 1.85 1.85 0.65 1.69 2.60 1.02 1.02 0.63 3.43 1.85 3.15
27NTR502550 1"1/2=>50 mm 1"1/2=>50 mm 3/4"=> 25 mm 1.85 1.85 0.83 1.69 2.60 1.02 1.02 0.79 3.43 1.85 3.15
27NTR503250 1"1/2=>50 mm 1"1/2=>50 mm 1"=> 32 mm 1.85 1.85 1.18 1.69 2.60 1.02 1.02 0.79 3.43 1.85 3.15
27NTR504050 1"1/2=>50 mm 1"1/2=>50 mm 1"1/4=>40 mm 1.69 1.69 1.42 2.60 2.60 0.91 0.91 0.87 4.02 1.97 3.27
27NTR632063 2"=>63 mm 2"=>63 mm 1/2" => 20 mm 1.97 1.97 0.60 1.36 3.35 1.08 1.08 0.57 4.80 2.07 3.74
27NTR632563 2" => 63 mm 2" => 63 mm 3/4"=> 25 mm 2.36 2.36 0.83 2.09 3.27 1.18 1.18 0.69 4.02 2.13 3.78
27NTR633263 2" => 63 mm 2" => 63 mm 1"=> 32 mm 2.36 2.36 1.18 2.09 3.27 1.18 1.18 0.83 4.02 2.13 3.78
27NTR634063 2" => 63 mm 2" => 63 mm 1"1/4=>40 mm 2.36 2.36 1.42 2.09 3.27 1.18 1.18 0.91 4.02 2.13 3.78
27NTR635063 2" => 63 mm 2" => 63 mm 1"1/2=>50 mm 1.97 1.97 1.81 3.15 3.15 0.98 0.98 1.02 4.80 2.52 4.09
27NTR635040 2" => 63 mm 1"1/4=>40 mm 1"1/2=>50 mm 1.97 1.69 1.81 3.15 3.15 0.98 0.87 0.91 6.90 2.52 4.09HD4
L
L1 L2ND1 L3H1ND2DND3
D3D1 D2
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10139.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NTR REDUCED TEE - SOCKET FUSION NI10139
2 6 -7
CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H
27NTR752075 2"1/2=>75 m m 2"1/2=>75 mm 1/2" => 20 mm 2.36 2.36 0.60 1.36 3.98 1.18 1.18 0.57 5.75 2.28 4.27
27NTR752575 2"1/2=>75 m m 2"1/2=>75 mm 3/4" => 25 mm 2.36 2.36 0.76 1.36 3.98 1.20 1.20 0.65 5.75 2.28 4.27
27NTR753275 2"1/2=>75 m m 2"1/2=>75 mm 1" => 32 mm 2.60 2.60 1.18 1.81 3.98 1.30 1.30 0.79 5.75 2.76 4.74
27NTR754075 2"1/2=>75 m m 2"1/2=>75 mm 1"1/4 =>40 mm 2.60 2.60 1.46 2.20 3.98 1.30 1.30 0.87 5.75 2.76 4.74
27NTR755075 2"1/2=>75 m m 2"1/2=>75 mm 1"1/2 =>50 mm 2.76 2.76 1.81 2.76 3.98 1.30 1.30 0.98 5.75 2.87 4.86
27NTR756375 2"1/2=>75 m m 2"1/2=>75 mm 2" => 63 mm 2.76 2.76 2.32 3.39 3.98 1.30 1.30 1.14 5.75 2.87 4.86
27NTR905090 3" => 90 mm 3" => 90 mm 1"1/2 =>50 mm 3.15 3.15 1.57 3.35 4.72 1.30 1.30 0.96 6.30 2.91 5.28
27NTR906390 3" => 90 mm 3" => 90 mm 2" => 63 mm 3.31 2.32 3.31 3.39 4.88 1.46 1.14 1.46 6.69 3.35 5.79
27NTR907590 3" => 90 mm 3" => 90 mm 2"1/2=>75 mm 3.31 2.76 3.31 3.98 4.88 1.46 1.30 1.46 6.69 3.35 5.79
27NTR11063110 4"=>110 mm 4"=>110 mm 2" => 63 mm 3.94 3.94 2.32 3.39 5.75 1.69 1.69 1.30 7.87 3.94 6.81
27NTR11075110 4"=>110 mm 4"=>110 mm 2"1/2=>75 mm 3.94 3.94 2.72 3.98 5.75 1.69 1.69 1.30 7.87 3.94 6.81
27NTR11090110 4"=>110 mm 4"=>110 mm 3" => 90 mm 3.94 3.94 3.35 4.80 5.75 1.69 1.69 1.46 7.87 3.94 6.81
27NTR12563125 5" => 125 mm 5" => 125 mm 2" => 63 mm 4.45 4.45 2.32 3.39 6.50 1.87 1.87 1.30 9.84 6.06 9.31
27NTR12575125 5" => 125 mm 5" => 125 mm 2"1/2=>75 mm 4.45 4.45 2.72 3.98 6.50 1.87 1.87 1.30 9.84 4.53 7.76
27NTR12590125 5" => 125 mm 5" => 125 mm 3" => 90 mm 4.45 4.45 3.35 4.80 6.50 1.87 1.87 1.46 9.84 4.53 7.76
27NTR125110125 5" => 125 mm 5" => 125 mm 4" =>110 mm 4.45 4.45 3.94 5.75 6.50 1.87 1.87 1.69 9.84 4.72 7.97
ND3D ND2H1L3ND1L2L1
L
D4 HD2D1D3
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10139.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NTR REDUCED TEE - SOCKET FUSION NI10139
3 6 -7
CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H
27NTR252020 3/4" => 25 mm 1/2" => 20 mm 1/2" => 20 mm 0.83 0.65 0.65 1.14 1.38 0.67 0.63 0.63 2.44 1.18 1.87
27NTR322525 1" => 32 mm 3/4" => 25 mm 3/4" => 25 mm 1.18 0.83 0.83 1.38 1.81 0.79 0.67 0.67 2.95 1.38 2.28D1ND1DD3
ND3
D4 ND2D2H1HL3L1
L
L2
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10139.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NTR REDUCED TEE - SOCKET FUSION NI10139
4 6 -7
CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H
27NTR252520 3/4" => 25 mm 1/2" => 20 mm 3/4" => 25 mm 0.83 0.65 0.83 1.38 1.38 0.67 0.63 0.67 2.44 1.18 1.87
27NTR323225 1" => 32 mm 3/4" => 25 mm 1" => 32 m m 1.18 0.83 1.18 1.81 1.81 0.79 0.67 0.79 2.95 1.50 2.40
ND3ND1D1DD3
D4
L1 L2
L3ND2D2H1HL
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10139.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NTR REDUCED TEE - SOCKET FUSION NI10139
5 6 -7D1ND1DL2D2ND2HH1L3D3
L
CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H
27NTR322020 1" => 32 mm 1/2" => 20 mm 1/2" => 20 mm 1.18 0.65 0.65 1.14 1.81 0.79 0.63 0.63 2.95 1.38 2.28
ND3
D4
L1
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10139.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
NTR REDUCED TEE - SOCKET FUSION NI10139
6 6 -7
CODE ND1 ND2 ND3 D1 D2 D3 D4 D L1 L2 L3 L H1 H
27NTR322025 1" => 32 mm 3/4" => 25 mm 1/2" => 20 mm 1.18 0.83 0.65 1.14 1.81 0.79 0.67 0.63 2.95 1.38 2.28
L1 L2
D1ND1DD2D3
ND3
L ND2L3H1HD4
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10061.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure to do so will entitle Nupi Americas to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFF_NPT
FEMALE THREADED ADAPTER W/NPT
LEAD FREE BRASS - SOCKET FUSION NI10061
1 2 -5NDD1DL1
L
LTh. minThread DThreadNDD1L
LTh. min
LCH
L1CHTYPE A TYPE B
CODE ND Thread L Thread min D1 D L1 L CH LCH
27NRFF2012NPT (A)1/2" => 20 mm 1/2" NPT 0.53 0.56 1.46 0.63 1.58 --
27NRFF2034NPT (A)1/2" => 20 mm 3/4" NPT 0.55 0.71 1.69 0.81 1.81 --
27NRFF2512NPT (A)3/4" => 25 mm 1/2" NPT 0.53 0.56 1.46 0.67 1.61 --
27NRFF2534NPT (A)3/4" => 25 mm 3/4" NPT 0.55 0.71 1.65 0.71 1.81 --
27NRFF3234NPT (A)1" => 32 mm 3/4" NPT 0.55 0.71 1.79 0.85 2.03 --
27NRFF321NPT (A)1" => 32 mm 1" NPT 0.66 0.95 2.13 0.79 2.05 --
27NRFF40114NPT (B)1" 1/4 => 40 mm 1"1/4 NPT 0.68 1.30 2.56 0.87 2.72 1.81 0.59
27NRFF50112NPT (B)1" 1/2 => 50 mm 1"1/2 NPT 0.68 1.56 2.95 0.98 2.80 2.17 0.59
27NRFF632NPT (B)2" => 63 mm 2" NPT 0.70 1.97 3.62 1.14 3.15 2.56 0.79
27NRFF75212NPT (B)2" 1/2 =>75 mm 2"1/2 NPT 0.93 2.40 4.33 1.30 3.50 3.03 0.98
27NRFF903NPT (B)3" => 90 mm 3" NPT 1.02 2.95 5.08 1.46 3.90 3.74 0.91
27NRFF1104NPT (B)4" => 110 mm 4" NPT 1.09 3.92 6.30 1.69 4.37 4.72 1.18
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Socket Fusion
Fittings\NI10061.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure to do so will entitle Nupi Americas to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.NRFF_NPT
FEMALE THREADED ADAPTER W/NPT
LEAD FREE BRASS - SOCKET FUSION NI10061
2 2 -5
CODE ND Thread L Thread min D1 D L1 L CH LCH
27NRFF401NPT (C)1" 1/4 => 40 mm 1" NPT 0.66 0.95 2.20 0.87 2.64 1.50 0.59
27NRFF50114NPT (D)1" 1/2 => 50 mm 1"1/4 NPT 0.59 1.30 2.68 0.98 2.80 1.93 0.59
27NRFF63112NPT (D)2" => 63 mm 1"1/2 NPT 0.59 1.57 3.39 1.14 2.95 2.28 0.59
27NRFF752NPT (D)2" 1/2 =>75 mm 2" NPT 0.79 1.97 3.98 1.30 3.31 2.68 0.79
27NRFF1254NPT (C)5" => 125 mm 4" NPT 1.09 3.92 6.30 1.87 4.55 4.72 1.18
L
LCH
LTh. min L1 NDThreadCHDD1TYPE C TYPE D
D1NDL1
L
LTh. minThreadCH DLCH
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Multilayer
Pipes\NI10169.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
TNIRCL NIRON MULTI CLIMA PP-RCT PIPE NI10169
1 8 -9
CODE SDR ND D S min Di Lenght (ft)Weight (lbs/ft)
27TNIRCL2073 7.3 1/2" => 20 mm 0.79 0.11 0.57 20 0.11
27TNIRCL2573 7.3 3/4" => 25 mm 0.98 0.14 0.71 20 0.17
27TNIRCL3273 7.3 1" => 32 mm 1.26 0.17 0.91 20 0.27
27TNIRCL4073 7.3 1" 1/4 => 40 mm 1.57 0.22 1.14 20 0.50
27TNIRCL5073 7.3 1" 1/2 => 50 mm 1.97 0.27 1.43 20 0.78
27TNIRCL6373 7.3 2" => 63 mm 2.48 0.34 1.80 20 1.21
27TNIRCL6373S40 7.3 2" => 63 mm 2.48 0.34 1.80 40 1.21
27TNIRCL7573 7.3 2" 1/2 => 75 mm 2.95 0.41 2.14 20 1.72
27TNIRCL7573S40 7.3 2" 1/2 => 75 mm 2.95 0.41 2.14 40 1.72
27TNIRCL9073 7.3 3" => 90 mm 3.54 0.48 2.57 20 2.46
27TNIRCL9073S40 7.3 3" => 90 mm 3.54 0.48 2.57 40 2.46
27TNIRCL11073 7.3 4" => 110 mm 4.33 0.59 3.14 20 3.69
27TNIRCL11073S40 7.3 4" => 110 mm 4.33 0.59 3.14 40 3.69
27TNIRCL12573 7.3 5" => 125 mm 4.92 0.67 3.57 20 4.72
27TNIRCL12573S40 7.3 5" => 125 mm 4.92 0.67 3.57 40 4.72
27TNIRCL16073 7.3 6" => 160 mm 6.30 0.86 4.57 20 7.67
27TNIRCL16073S40 7.3 6" => 160 mm 6.30 0.86 4.57 40 7.67
27TNIRCL20073 7.3 8" => 200 mm 7.87 1.08 5.72 20 10.43
27TNIRCL20073S40 7.3 8" => 200 mm 7.87 1.08 5.72 40 10.43DS minD i
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Multilayer
Pipes\NI10169.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
TNIRCL NIRON MULTI CLIMA PP-RCT PIPE NI10169
2 8 -9
CODE SDR ND D S min Di Lenght (ft)Weight (lbs/ft)
27TNIRCL25073 7.3 10" => 250 mm 9.84 1.35 7.15 20 16.33
27TNIRCL25073S40 7.3 10" => 250 mm 9.84 1.35 7.15 40 16.33
27TNIRCL31573 7.3 12" => 315 mm 12.40 1.70 9.00 20 25.70
27TNIRCL31573S40 7.3 12" => 315 mm 12.40 1.70 9.00 40 25.70
D iS minD
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Multilayer
Pipes\NI10169.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
TNIRCL NIRON MULTI CLIMA PP-RCT PIPE NI10169
3 8 -9
CODE SDR ND D S min Di Lenght (ft)Weight (lbs/ft)
27TNIRCL329 9 1" => 32 mm 1.26 0.14 0.98 20 0.22
27TNIRCL409 9 1" 1/4 => 40 mm 1.57 0.17 1.22 20 0.35
27TNIRCL509 9 1" 1/2 => 50 mm 1.97 0.22 1.53 20 0.54
27TNIRCL639 9 2" => 63 mm 2.48 0.28 1.92 20 0.84
27TNIRCL639S40 9 2" => 63 mm 2.48 0.28 1.92 40 0.84
27TNIRCL759 9 2" 1/2 => 75 mm 2.95 0.33 2.29 20 1.19
27TNIRCL759S40 9 2" 1/2 => 75 mm 2.95 0.33 2.29 40 1.19
27TNIRCL909 9 3" => 90 mm 3.54 0.39 2.75 20 1.71
27TNIRCL909S40 9 3" => 90 mm 3.54 0.39 2.75 40 1.71
27TNIRCL1109 9 4" => 110 mm 4.33 0.48 3.36 20 2.54
27TNIRCL1109S40 9 4" => 110 mm 4.33 0.48 3.36 40 2.54
27TNIRCL1259 9 5" => 125 mm 4.92 0.55 3.82 20 3.29
27TNIRCL1259S40 9 5" => 125 mm 4.92 0.55 3.82 40 3.29
27TNIRCL1609 9 6" => 160 mm 6.30 0.70 4.89 20 5.17
27TNIRCL1609S40 9 6" => 160 mm 6.30 0.70 4.89 40 5.17S minDD i
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Multilayer
Pipes\NI10169.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
TNIRCL NIRON MULTI CLIMA PP-RCT PIPE NI10169
4 8 -9DS minD iCODE SDR ND D S min Di Lenght (ft)Weight (lbs/ft)
27TNIRCL2009 9 8" => 200 mm 7.87 0.87 6.13 20 7.65
27TNIRCL2009S40 9 8" => 200 mm 7.87 0.87 6.13 40 7.65
27TNIRCL2509 9 10" => 250 mm 9.84 1.09 7.66 20 11.90
27TNIRCL2509S40 9 10" => 250 mm 9.84 1.09 7.66 40 11.90
27TNIRCL3159 9 12" => 315 mm 12.40 1.38 9.62 20 18.90
27TNIRCL3159S40 9 12" => 315 mm 12.40 1.38 9.62 40 18.90
27TNIRCL3559 9 14" => 355 mm 13.98 1.55 10.86 20 24.05
27TNIRCL3559S40 9 14" => 355 mm 13.98 1.55 10.86 40 24.05
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Multilayer
Pipes\NI10169.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
TNIRCL NIRON MULTI CLIMA PP-RCT PIPE NI10169
5 8 -9
CODE TYPE SDR ND D S min Di Lenght (ft)Weight (lbs/ft)
27TNIRCL4011 A 11 1" 1/4 => 40 mm 1.57 0.15 1.28 20 0.30
27TNIRCL5011 A 11 1" 1/2 => 50 mm 1.97 0.18 1.61 20 0.46
27TNIRCL6311 A 11 2" => 63 mm 2.48 0.23 2.02 20 0.71
27TNIRCL6311S40 A 11 2" => 63 mm 2.48 0.23 2.02 40 0.71
27TNIRCL7511 A 11 2" 1/2 => 75 mm 2.95 0.27 2.42 20 0.99
27TNIRCL7511S40 A 11 2" 1/2 => 75 mm 2.95 0.27 2.42 40 0.99
27TNIRCL9011 A 11 3" => 90 mm 3.54 0.32 2.90 20 1.42
27TNIRCL9011S40 A 11 3" => 90 mm 3.54 0.32 2.90 40 1.42
27TNIRCL11011 A 11 4" => 110 mm 4.33 0.39 3.54 20 2.12
27TNIRCL11011S40 A 11 4" => 110 mm 4.33 0.39 3.54 40 2.12
27TNIRCL12511 A 11 5"=> 125 mm 4.92 0.45 4.02 20 2.75
27TNIRCL12511S40 A 11 5"=> 125 mm 4.92 0.45 4.02 40 2.75
27TNIRCL16011 A 11 6" => 160 mm 6.30 0.57 5.15 20 4.45
27TNIRCL16011S40 A 11 6" => 160 mm 6.30 0.57 5.15 40 4.45
27TNIRCL20011 A 11 8" => 200 mm 7.87 0.72 6.44 20 6.94
27TNIRCL20011S40 A 11 8" => 200 mm 7.87 0.72 6.44 40 6.94
27TNIRCL25011 A 11 10" => 250 mm 9.84 0.89 8.06 20 10.71
27TNIRCL25011S40 A 11 10" => 250 mm 9.84 0.89 8.06 40 10.71
27TNIRCL31511 A 11 12" => 315 mm 12.40 1.13 10.15 20 16.93
27TNIRCL31511S40 A 11 12" => 315 mm 12.40 1.13 10.15 40 16.93DS minD iTYPE A
TYPE B
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Multilayer
Pipes\NI10169.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
TNIRCL NIRON MULTI CLIMA PP-RCT PIPE NI10169
6 8 -9
CODE TYPE SDR ND D S min Di Lenght (ft)Weight (lbs/ft)
27TNIRCL35511 A 11 14" => 355 mm 13.98 1.27 11.44 20 21.46
27TNIRCL35511S40 A 11 14" => 355 mm 13.98 1.27 11.44 40 21.46
27TNIRCL40011 A 11 16" => 400 mm 15.75 1.43 12.89 20 27.09
27TNIRCL40011S40 A 11 16" => 400 mm 15.75 1.43 12.89 40 27.09
27TNIRCL45011 B 11 18" => 450 mm 17.72 1.61 14.50 20 33.57
27TNIRCL50011 B 11 20" => 500 mm 19.69 1.79 16.11 20 41.32S minDD iTYPE A
TYPE B
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Multilayer
Pipes\NI10169.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
TNIRCL NIRON MULTI CLIMA PP-RCT PIPE NI10169
7 8 -9
CODE TYPE SDR ND D S min Di Lenght (ft)Weight (lbs/ft)
27TNIRCL6317 A 17 2" => 63 mm 2.48 0.15 2.18 20 0.48
27TNIRCL6317S40 A 17 2" => 63 mm 2.48 0.15 2.18 40 0.48
27TNIRCL7517 A 17 2" 1/2 => 75 mm 2.95 0.18 2.60 20 0.69
27TNIRCL7517S40 A 17 2" 1/2 => 75 mm 2.95 0.18 2.60 40 0.69
27TNIRCL9017 A 17 3" => 90 mm 3.54 0.21 3.12 20 0.98
27TNIRCL9017S40 A 17 3" => 90 mm 3.54 0.21 3.12 40 0.98
27TNIRCL11017 A 17 4" => 110 mm 4.33 0.26 3.81 20 1.45
27TNIRCL11017S40 A 17 4" => 110 mm 4.33 0.26 3.81 40 1.45
27TNIRCL12517 A 17 5"=> 125 mm 4.92 0.29 4.34 20 1.86
27TNIRCL12517S40 A 17 5"=> 125 mm 4.92 0.29 4.34 40 1.86
27TNIRCL16017 A 17 6" => 160 mm 6.30 0.37 5.55 20 3.04
27TNIRCL16017S40 A 17 6" => 160 mm 6.30 0.37 5.55 40 3.04
27TNIRCL20017 A 17 8" => 200 mm 7.87 0.47 6.94 20 4.74
27TNIRCL20017S40 A 17 8" => 200 mm 7.87 0.47 6.94 40 4.74
27TNIRCL25017 A 17 10" => 250 mm 9.84 0.58 8.68 20 7.32
27TNIRCL25017S40 A 17 10" => 250 mm 9.84 0.58 8.68 40 7.32DS minD iTYPE A
TYPE B
TYPE A : MULTILAYER PIPE
TYPE B: MONOLAYER PIPE 6% FIBER RENFORCED
www.nupiamericas.com - info@nupiamericas.com
ITEM:
C:\Vault_Temp\Disegni\Schede Tecniche\Niron Grey inches\Multilayer
Pipes\NI10169.dwg
All dimensions have to be considered in inches with 5% tolerance if not otherwise mentioned exclusing values as per standard ASTM F2389
DESC:
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
DRAWING No:
SHEET OF REV.
TNIRCL NIRON MULTI CLIMA PP-RCT PIPE NI10169
8 8 -9
CODE TYPE SDR ND D S min Di Lenght (ft)Weight (lbs/ft)
27TNIRCL31517 A 17 12" => 315 mm 12.40 0.74 10.93 20 11.60
27TNIRCL31517S40 A 17 12" => 315 mm 12.40 0.74 10.93 40 11.60
27TNIRCL35517 A 17 14" => 355 mm 13.98 0.83 12.31 20 14.67
27TNIRCL35517S40 A 17 14" => 355 mm 13.98 0.83 12.31 40 14.67
27TNIRCL40017 A 17 16" => 400 mm 15.75 0.93 13.88 20 18.55
27TNIRCL40017S40 A 17 16" => 400 mm 15.75 0.93 13.88 40 18.55
27TNIRCL45017 B 17 18" => 450 mm 17.72 1.05 15.61 20 23.41
27TNIRCL50017 B 17 20" =>500 mm 19.69 1.17 17.35 40 28.83
27TNIRCL56017 B 17 22" => 560 mm 22.05 1.31 19.43 20 35.97
27TNIRCL63017 B 17 24" => 630 mm 24.80 1.47 21.86 40 45.43
D iS minDTYPE A
TYPE B