HomeMy WebLinkAboutRESCHECKS - 04-00106 - 417 S 12th W - AdditionREScheck Compliance Certificate
2000 IECC
REScheckSoftware Version 3.5 Release le
Data filename: Untitled.rck
CITY: Rexburg
STATE: Idaho
HDD: 8693
CONSTRUCTION TYPE: Single Family
DATE: 10/26/04
COMPLIANCE: Passes
Maximum UA = 150
Your Home UA = 114
24.0% Better Than Code (UA)
Ceiling 1: Flat Ceiling or Scissor Truss
Wall 1: Wood Frame, 16" o.c.
Window 1: Vinyl Frame:Double Pane with Low-E
Window 2: Vinyl Frame:Double Pane with Low-E
Window 3: Vinyl Frame:Double Pane with Low-E
Door 1: Solid
.' Crawl 1: Solid Concrete or Masonry
Wall height: 4.0'
Depth below grade: 3.0'
Insulation depth: 4.0'
Furnace 1: Forced Hot Air, 90 AFUE
Permit Number
Checked By/Date
Gross
Glazing
Area or
Cavity
Cont.
or Door
Perimeter R-Value
R-Value
U-Factor
UA
660
13.0
27.0
16
581
19.0
0.0
30
30
0.350
11
32
0.350
11
6
0.350
2
20
0.350
7
360
7.5
0.0
37
COMPLIANCE STATEMENT: The proposed building design described here is consistent with the building plans, specifications,
and other calculations submitted with the permit application. The proposed building has been designed to meet the 2000 IECC
requirements in REScheckVersion 3.5 Release le (formerly MECchec4 and to comply with the mandatory requirements listed in
the RES checkInspection Checklist.
Builder/Designer Date
Permit Number
REScheck Compliance Certificate Checked By/Date
995 NMC 76� Ccc-
RESc rec r oftware Version 3.5 Release le
Data filename: Untitled.rck
PROJECT TITLE: John and Judy Steiner
CITY: Rexburg
STATE: Idaho
HDD: 8693
CONSTRUCTION TYPE: Single Family
DATE: 02/19/04
DATE OF PLANS: February 2004
PROJECT DESCRIPTION:
Addition
417 S 12th W
Rexbura;ID 83440
DE SIGNER/CONTRACTOR:
S.iai a rive: Drn ig is
Shawn Jensen
2240 South Hwy 191
Rexburg, ID 83440
(208)390-7138
COMPLIANCE: Passes
Maximum UA = 135
Your Home UA = 100
25.9% Better Than Code (UA)
Ceiling 1: Flat Ceiling or Scissor Truss
Wall 1: Wood Frame, 16" o.c.
Window: 5030: Vinyl Frame. Double Pane with Low-F.
Window: 4040SV: Vinyl Frame, Double Pane with Low-E
Window: 2030SV: Vinyl Frame, Double Pane with Low-E
iii
—1 vul i. a 1- 11 vv'uvu Jvi>u i�uaa.v vci UIM1�UIlu1LIVlIGu $NdLc
Furnace 1: Forced Hot Air, 90 AFUE
Gross Glazing
Area or Cavity Cont. or Door
Perimeter R-Value R-Value U-Factor UA
660
13.0 27.0 16
581
21.0 0.0 29
30
0350 11
32
0.350 11
6
0.350 2
VVV
17.V V.V Jl
COMPLIANCE STATEMENT: The proposed building design described here is consistent with the building plans, specifications,
and other calculations submitted with the permit application. The proposed building has been designed to meet the 1995 MEC
requirements in RFS check Version 3 5 Release le (formerly MFCchecib and to comnly with the mandatory renuirements listed in
the RES check Inspection Checklist.
Ruud iuesigner Date Z 9 G
REScheck Inspection Checklist
1995 MEC
REScheckSoftware Version 3.5 Release le
DATE: 02/19/04
PROJECT TITLE: John and Judy Steiner
Bldg.
Dept.
Use
Ceilings:
1. Ceiling 1: Flat Ceiling or Scissor Truss,
R-13.0 cavity + R-27.0 continuous insulation
Comments:
Above -Grade Walls:
1. Wall 1: Wood Frame, 16" o.c., R-21.0 cavity insulation
Uomn-ieuis:
Windows:
1. Window: 5030: Vinyl Frame, Double Pane with Low-E, U-factor: 0.350
For windows without labeled U-factors, describe features:
# Panes Frame Type Thermal Break? f 1 Yes f 1 No
Comments:
2. Window: 4040SV: Vinyl Frame, Double Pane with Low-E, U-factor: 0.350
J ---- !aL-..a t-L_t_J TT r a--_ J__--L-
Tor VY1i1UVW, VVIL114JUL IdUVIVL1 U-Ld%4V10, L1G514.41VC LV4LLUGJ.
# Panes Frame Type Thermal Break? [ ] Yes [ ] No
Comments:
3. Window: 2030SV: Vinyl Frame, Double Pane with Low-E, U-factor: 0.350
For windows without labeled U-factors, describe features:
# Panes Frame Type Thermal Break? f 1 Yes f 1 No
Comments:
Wo _
r looi s:
1. Floor 1: All -Wood Joist/Truss:Over Unconditioned Space, R-19.0 cavity insulation
Comments:
Heating and Cooling Equipment:
1. Furnace 1: Forced Hot Air; 90 AFUE or higher
Make and Model Number
.._. W .----:
Joints, penetrations, and all other such openings in the building envelope that are sources of air
leakage must be sealed.
Recessed lights must be 1) Type IC rated, or 2) installed inside an appropriate air -tight assembly
with a 0.5" clearance from combustible materials. If non -IC rated, the fixture must be installed with a
3" clearance from insulation.
Vapor Retarder:
--XLjU11 VU Vil Luc warrii-irl—WHILer side of all iion-iieiited uaiiieu diiu bogs.
Materials Identification:
Materials and equipment must be identified so that compliance can be determined.
Manufacturer manuals for all installed heating and cooling equipment and service water heating
equipment must be provided.
Insulation R values, glazing U-factors, and heating equipment efficiency must be clearly marked on
the building plans or specifications.
Duct Insulation:
Ducts in unconditioned spaces must be insulated to R-5.
Ducts outside the building must be insulated to R-8.0.
Duct Construction:
All ducts must be sealed with mastic and fibrous backing tape. Pressure -sensitive tape may be used
for fibrous ducts. Duct tape is not permitted.
The HVAC system must provide a means for balancing air and water systems.
Temperature Controls:
Thermostats are required for each separate HVAC system. A manual or automatic means to
partially restrict or shut off the heating and/or cooling input to each zone or floor shall be provided.
Circulating Hot Water Systems:
Insulate circulating hot water pipes to the levels in Table 1.
Swimming Pools:
[ All heated swimming pools must have an on/off heater switch and require a cover unless over 20%
of the heating energy is from non-depletable sources. Pool pumps require a time clock.
Heating and Cooling Piping Insulation:
[ ] HVAC piping conveying fluids above 120 OF or chilled fluids below 55 OF must be insulated to the
levels in Table 2.
Table 1: Minimum Insulation Thickness for Circulating Hot Water Pipes.
Insulation Thickness in
Inches by Pipe Sizes
Heated Water
Non -Circulating Runouts
Circulating Mains and Runouts
Temperature ( F)
U to I"
Up to 1.25"
1.5" to 2.0" Over 2"
170-180
0.5
1.0
1.5 2.0
140-160
0.5
0.5
1.0 1.5
100-130
0.5
0.5
0.5 1.0
Table 2: Minimum Insulation Thickness for HVAC Pipes.
Fluid Temp.
Insulation Thickness in Inches by
Pipe Sizes
Piping System Types
Range ( F)
2" Runouts
1" and Less
1.25" to 2" 2.5" to 4"
Heating Systems
Low Pressure/Temperature
201-250
1.0
1.5
1.5
2.0
Low Temperature
120-200
0.5
1.0
1.0
1.5
Steam Condensate (for feed water)
Any
1.0
1.0
1.5
2.0
Cooling Systems
Chilled Water, Refrigerant,
40-55
0.5
0.5
0.75
1.0
and Brine
Below 40
1.0
1.0
1.5
1.5
NOTES TO FIELD (Building Department Use Only)