Loading...
HomeMy WebLinkAboutFA PRODUCT INFO 2 - 20-00977 - Cal Ranch Interior - Remodel Fire Alarm Systems | D7050-B6 Multiplex base, 2-wire D7050-B6 Multiplex base, 2-wire www.boschsecurity.com u Connects to multiplex bus of FPD‑7024 or D7024 addressable FACPs, DS7400Xi Control Panel for the US, and G Series Panels u Detector's head is easily removed by twisting u Two‑piece detector head and base design allows pre‑wiring the system The D7050‑B6 is the required base for the D7050 MUX smoke heads and D7050TH MUX smoke heads with fixed heat (135°F). It connects to the multiplex bus of the compatible FACP or combination Burglary/Fire control panel (see Planning). Notice The FPD-7024 and D7024 require an FPE-7039 or D7039* MUX expansion module to connect to this base. Additionally, the D7024* FACP must be ROM version 2.0 or higher. The DS7400Xi* control panel requires a DS7430 Multiplex Expansion Module to connect to this base. The G Series control panels require a D8125MUX Multiplex Interface Module to connect to this base. * indicates legacy product Certifications and approvals Region Regulatory compliance/quality marks USA UL UL 268, Smoke Detectors for Fire AlarmSystems FM D7050-B6 Region Regulatory compliance/quality marks CSFM see www.boschsecurity.com (the Boschwebsite) FDNY-CoA 6173 Installation/configuration notes Compatible Panels The D7050‑B6 is compatible with the FPD-7024 and D7024* Fire alarm control panels, the DS7400Xi* Control panel for the US, and the G Series panels (B9512G, B8512G, D9412GV4, D7412GV4, D7212GV41 D9412GV3, D7412GV3, D7212GV31 D9412GV2*, D7412GV2*, D7212GV2*1 D9412G*, D7412G*, and D7212G*1) * Legacy product - not available for purchase. The D7024 FACPs and DS7400Xi panel are listed to UL864, 8th edition. The G series legacy products are listed to UL864, 9th edition. 1 The D7212G models are not UL Listed for commercial fire. Mounting Considerations The base can be mounted on a four‑inch square, a four‑inch octagonal, or a single‑gang box. It can also be surface mounted with anchors, mollies, or wing nuts. Number of Devices Allowed The number of multiplex devices allowed on the multiplex bus is determined by wire gauge and total bus wire length. Do not exceed 50 Ω maximum line resistance. For multiplex bus wiring requirements, see the Installation Manual for the pertinent MUX expansion/interface module. Wiring Connections ! Warning Do not use shielded cable. The D7050-B6 bases can be wired in series or using the T‑tap method. For wiring details, see the D7050-B6 Installation Manual. Parts included Quantity Component 1 Detector base 1 Hardware pack 1 Literature pack Technical specifications Environmental Relative Humidity:0% to 93% non‑condensing Temperature (0perating):+32°F to +100°F (0°C to +38°C) Mechanical Color:Off-white Material:High‑impact, fire‑retardant polymer plastic Dimensions (diameter x H) product package 5.67 in. (0.144 m) x 1.02 in. (0.026 m) Packaged weight Gross Net 3.53 oz. (0.100 kg) 2.93 oz. (0.083 kg) Ordering information D7050-B6 Multiplex base, 2-wire Required base for the D7050 and D7050TH MUX smoke heads Order number D7050-B6 Accessories D7050 Multiplex smoke head The symmetry of the D7050’s optical chamber allows 360° uniform smoke entry, but minimizes external light entry. Within the chamber, large smoke particles scatter infrared light which is detected by a gated, high-speed, photodiode sensor. Order number D7050 D7050TH Multiplex detector head, fixed heat The D7050TH has an optical smoke chamber and a 35°F (57°C) fixed-temperature sensor. Use it in confined areas where a fire increases air temperature slowly but substantially before the fire breaks confinement. Order number D7050TH DRA-12/24 Remote indicator plate, 12/24V Designed to provide remote annunciation of alarms when connected to the D7050‑B6 MUX base, 2‑wire Order number DRA-12/24 D8125MUX Expansion module, Multiplex Controls two independent buses. Order number D8125MUX 2 | D7050-B6 Multiplex base, 2-wire Represented by: Europe, Middle East, Africa:Germany:North America:Asia-Pacific: Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 emea.securitysystems@bosch.com emea.boschsecurity.com Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany www.boschsecurity.com Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 onlinehelp@us.bosch.com www.boschsecurity.us Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6571 2808 Fax: +65 6571 2699 apr.securitysystems@bosch.com www.boschsecurity.asia © Bosch Security Systems 2018 | Data subject to change without notice 2706837387 | en, V9, 05. Dec 2018