HomeMy WebLinkAboutBONUS POINTS 5.17.2021 - 21-00177 - Teton River Flats - 280 Lorene St - PUD Plat (23 BLDGS)Density Bonus Calculator
Energy Efficiency
1. Insulation. All dwellings and main buildgings shall have wall and ceiling insulation that exceeds the requirements of the International Energy Conservation Code (IECC). Exceeding
the requirments for doors and window energy efficeincy can also be taken into consideration for density bonus
Typical Wall insulation R-19-R-22, Adding additional insulated sheeting
Adding R-10 to Attic or roof insulation
2. Solar Design. All dwellings are designed with an active or passive solar feature. The solar feature shall be a solar water heater, trombe wall, earth insulation of a majority of the
walls, the building designed so that the main exposure faces south and has windows to allow solar access, or other features as approved by the Planning and Zoning Commission.
Maximum
3. LEED. Development achieves a Leadership in Energy and Environmental Design (LEED) certification for Neighborhoods Development through the U.S. Green Building Council (USGBC).
Building Design
1. Materials. All facades of each dwellling structure, exclusive of windows or doors, are clad in long-lasting, high quality materials as appropriate for the approved architectural style.
Examples of such materials are stone, brick, stucco, horizontal wood siding, wood board and batten siding, wood shingles, etc. Facismiles such as cementious hardboard (for horizontal
siding) and faux stone (for real stone) will be considered on a case by case basis.
2. Roof Materials. Roof materials should also be appropriate to the style. All roofs of main buildings are clad with wood shingles, tile, high profile asphalt shingles or slate shingles.
Other high quality products may be considered on a case by case basis.
Design Theme
1. Installed Landscaping. Landscaping is designed and installed along all streets of the development according to a theme which provides units and interest.
2. Theme Lighting. Theme lighting is used throughout the development for street lighting, lighting of walkways, parking areas, entrances and building exteriors.
3. Fencing. Perimeter fencing is used throughout the project that matches the building design, i.e. masonry columns or piers using the same brick or stone as the buildings.
4. Special Features. Special features such as fountains, streams, ponds, sculptures, buildings or other elements which establish a strong theme for the development and are utilized in
highly visible locations in the development.
5. Shared Theme. Wide range of housing (e.g. apartments, condos, medium density, low density, and mixed use) share an architectural and landscaped theme.
Parking Areas
1 Screening. Parking lots of twenty (20) or more stalls are screened from view by means of berming or landscaping around the perimeter of the parking lot.
2. Landscaped Islands. Parking lots of twenty (20) or more stalls or a continous row of parking over ninety (90') feet in length has a landscaped island(s) which provides landscaping
at a ration of (1:13) 1 square foot of landscaping per 13 square feet of hard surface.
3. Shade Trees. Areas with five (5) or more uncovered parking stalls are designed to include, at a minimum, two (2") inch caliper trees located in such a manner as to shade fifty (50%)
percent of the parking area upon maturation of the trees.
4. Permeable Surfaces. Surfaces for parking and maneuvering other than the public right-of-way using materials such as grasscrete, or similar are utilized in appropriate locations. Material
and installation details must be reviewed and approved by the City Engineer.
5. Parking Area Location. Locate all off-street parking at the side or rear of buildings, leaving building frontages and streetscapes free of parking facilities.
6. Bicycle Parking. For any non-residential buildings or multi-family, residential buildings that are part of the proposal, provide bicycle parking spaces, equivalent to ten (10%) percent
of the total automobile parking on site.
Subtotal
Recreational Amenties
1. Active Recreation. The PUD includes a recreational amenity primarily for the use of the residents of the development. Amenities may include swimming pools, sports courts, spas, barbeque
and picnic facilities, or other features as approved by the Planning and Zoning Commission.
2. Common Buildings or Facilities. Development of a common building which shall be used for meetings, indoor recreation, day care, or other common uses as approved by the Planning and
Zoning Commission. RV parking facilities may also be considered with this design feature.
3. Park Dedication. Dedication of land for public park, public access along a stream, or public access along a planned trail.
i
4. Construction of Trail or Park. Construction according to city standards of trail or park which has been dedicated to the City according to item number (3.i) above
5. Riparian Areas. Riparian areas along rivers and streams are preserved with natural and native landscaping to encourage continued use of these areas as wildlife corridors.
Landscaping
1. Extra Trees. Design and planting more than the minimum number of trees, shrubs, and perennials per dwelling unit in the development.
2. Soften Fence Appearance. Areas which are to be screened use a solid non-see-through viny or masonry fence and landscaping which acts to soften the appearance of the fence. Landscaping
may be vines, shrubs, or trees.
Open Green Space
1. Designed Plan. Open green space is designed (not leftover space between buildings) and flows uniterrupted through the entire development linking dwellings and recreation amenities.
2. Multiple Use. Storm water detention facilities are designed and used for mulitple purposes which blend with the overall theme of the open space design (i.e., shape of the area is
free flowing, and the grading and landscaping are carried out in such a manner that the use as a detention pond is not discernible.mimimum 500 sq. ft.)
3. Native Plants. Native plants are used for common space elements
4. Drought Tolerant Plants. Drought tolerant plants are used for common open space elements.
Public Streets. All streets within the development (except the streets required by the City to be dedicated) are open to public use, but privately maintained.
Housing. Mixed housing types, (e.g. apartments, condos, medium density, low density, and mixed use) are incorporated in the development with the intent to allow aging in place and appropriate
mixes of socioeconomic groups.
Bicycle parking must be within fifty (50') feet of the entrance to the building that it services.
Sheltered bicycle parking
The Planning and Zoning Commission may determine the points based on the cost of the amenity, its benefit to the residents of the development, its size, and the number of amenities in
the development.
Outdoor Swimming Pool (built into ground with at least 200 sq ft)
Tennis or Handball court
Work out trail (must wind through open area include chin up bar, adjustable sit up plank, push up bar, body raise bar and two park benches)
Built in Hot tub in conjunction with pool
Picnic Shelter with tables (200 sq.ft with concrete Pad)
Masonry Barbeque with tables
Conventional Hot tub
Fire Pit with seating
Picnic Tables (minimum of 4)
Maximum Allowable
The City must be willing to accept the proposed dedication before points are awarded.( Requires 3 acres, with grass, trees and playground equipment)
Solar Water Heater
Earth insulation on majority of walls
Trombe (brick wall inside windowed area) designed to collect heat
Buildings designed to allow solar access (windows facing south)
Single feature per unit throughout the entire project
Combination features per unit throughout the entire project
All brick or stone faced buildings
Wainscoat only
Mainly Stucco with brick or stone wainscoat
Mainly wood or cement siding with brick or stone wainscoat
Maximum allowed
High profile Asphalt Shingles
Wood Shingles
Tile or Slate
Maximum Allowed
Public access
Public Park
Public access
Public Park
Certified
Silver
Gold
Platinum
Subtotal
Subtotal
Subtotal
Subtotal
5
5
10
10
10
10
10
20
30
40
20
5
10
10
5
10
15
25
20
15
10
10
10
5
5
5
NDA = Net developable acre
Possible
665
5
5
20
30
40
100
20
15
20
15
10
20
20
85
20
15
15
15
10
10
20
105
35
20
15
40
15
40
15
165
20
15
35
25
25
15
10
75
25
40
Earned
100
5
0
0
0
0
10
10
5
5
10
5
0
5
0
20
10
0
0
0
5
5
0
20
0
10
0
0
5
5
0
0
5
25
0
0
0
0
0
0
25
10
0
10
10
0
0
0
10
0
0
Zone
LDR1
LDR2
LDR3
MDR1
MDR2
Base Density Units/NDA
3.63
8.71
10.89
16
20
Max. Density Units/NDA
4.84
10.89
13.2
22
26
Density Coefficient
0.0121
0.0218
0.0231
0.06
0.06
Maximum Points
100
100
100
100
100
Earned Points
100
100
100
100
100
New Density
4.84
10.89
13.2
22
26