HomeMy WebLinkAboutTRUSS SPECS - 21-00256 - 2156 W 690 S - New SFRJob
SAVANNAH CM 3C
Truss
A1
Truss Type
GABLE
Qty
1
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:39 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-mjCQY870tBYKglBaUZAGu3fAaewqmWP4zxZ71szoTSo
Scale = 1:70.4
T2 T2
B1
W1
W2
W3 W4
W2
W3
W4
T1 T1
B1B2
ST12
ST13
ST10
ST11
ST8
ST9
ST6
ST7
ST5
ST3
ST4
ST2ST1
ST12
ST13
ST10
ST11
ST8
ST9
ST6
ST7
ST5
ST3
ST4 ST2 ST1
A B
C
D
E
F
G
H I
N M L K J
BA
BB BC
BD
BE BF BG BH
5x8
5x6
5x8
5x6
3x8
5x6
5x6 3x4
3x4
5x6 3x4
3x4
10-0-0
10-0-0
20-0-0
10-0-0
30-0-0
10-0-0
40-0-0
10-0-0
-1-0-0
1-0-0
6-8-0
6-8-0
13-4-0
6-8-0
20-0-0
6-8-0
26-8-0
6-8-0
33-4-0
6-8-0
40-0-0
6-8-0
41-0-0
1-0-0
0-4-18-8-19-0-130-4-15.00 12
Plate Offsets (X,Y)-- [B:0-2-5,Edge], [D:0-4-0,0-3-4], [F:0-4-0,0-3-4], [H:0-2-5,Edge], [J:0-2-0,0-1-8], [K:0-3-0,0-3-4], [M:0-3-0,0-3-4], [N:0-2-0,0-0-11]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.71
0.74
0.93
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.42
-0.63
0.20
0.39
(loc)
L-N
L-N
H
L-N
l/defl
>999
>757
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
Weight: 271 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
WEBS 2x4 DF Stud/Std *Except*
W1,W2: 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F
1.6E
OTHERS 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed or 2-4-5 oc purlins.
BOT CHORD Rigid ceiling directly applied or 4-3-11 oc bracing.
WEBS 1 Row at midpt F-L, D-L
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.(lb/size)B=2047/0-3-8 (min. 0-2-3), H=2047/0-3-8 (min. 0-2-3)
Max Horz B=160(LC 11)
Max UpliftB=-792(LC 12), H=-792(LC 12)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
TOP CHORD B-BA=-4275/2212, C-BA=-4181/2226, C-D=-3801/2146, D-BB=-2648/1510, E-BB=-2530/1523,
E-BC=-2530/1523, F-BC=-2648/1510, F-G=-3801/2146, G-BD=-4181/2226, H-BD=-4275/2212
BOT CHORD B-N=-1970/3839, M-N=-1560/3117, M-BE=-1560/3117, BE-BF=-1560/3117, L-BF=-1560/3117,
L-BG=-1572/3117, BG-BH=-1572/3117, K-BH=-1572/3117, J-K=-1572/3117, H-J=-1975/3839
WEBS E-L=-972/1430, F-L=-1037/562, F-J=-492/586, G-J=-559/213, D-L=-1037/562, D-N=-492/586,
C-N=-559/213
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=40ft; eave=5ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Exterior(2) -1-0-11 to 2-11-5, Interior(1) 2-11-5 to 20-0-0, Exterior(2) 20-0-0 to 24-0-0, Interior(1) 24-0-0 to
41-0-11 zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and
forces & MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) Truss designed for wind loads in the plane of the truss only. For studs exposed to wind (normal to the face), see Standard Industry
Gable End Details as applicable, or consult qualified building designer as per ANSI/TPI 1.
4) All plates are 1.5x4 MT20 unless otherwise indicated.
5) Gable studs spaced at 2-0-0 oc.
6) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
7) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members, with BCDL = 7.0psf.
8) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) B=792,
H=792.
9) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
A2
Truss Type
Common
Qty
5
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:42 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-BItYA9AvA6wvXDv89hjzWhHhprxXzt9WfvnneBzoTSl
Scale = 1:67.1
T2 T2
B1
W1 W2
W3
W4
W2
W3
W4
T1 T1
B1B2AB
C
D
E
F
G
H I
N M L K J
O
P Q
R
S T U V
5x8
5x6
5x8
5x6
5x6 3x8 3x4
1.5x4
3x4
1.5x4
5x6
5x6
10-0-0
10-0-0
20-0-0
10-0-0
30-0-0
10-0-0
40-0-0
10-0-0
-1-0-0
1-0-0
6-8-0
6-8-0
13-4-0
6-8-0
20-0-0
6-8-0
26-8-0
6-8-0
33-4-0
6-8-0
40-0-0
6-8-0
41-0-0
1-0-0
0-4-18-8-19-0-130-4-15.00 12
Plate Offsets (X,Y)-- [B:0-2-5,Edge], [D:0-4-0,0-3-4], [F:0-4-0,0-3-4], [H:0-2-5,Edge]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.71
0.74
0.93
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.42
-0.63
0.20
0.39
(loc)
L-N
L-N
H
L-N
l/defl
>999
>757
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
Weight: 178 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
WEBS 2x4 DF Stud/Std *Except*
W1,W2: 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F
1.6E
BRACING-
TOP CHORD Sheathed or 2-4-5 oc purlins.
BOT CHORD Rigid ceiling directly applied or 4-3-11 oc bracing.
WEBS 1 Row at midpt F-L, D-L
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.(lb/size)B=2047/0-3-8 (min. 0-2-3), H=2047/0-3-8 (min. 0-2-3)
Max Horz B=160(LC 11)
Max UpliftB=-792(LC 12), H=-792(LC 12)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
TOP CHORD B-O=-4275/2212, C-O=-4181/2226, C-D=-3801/2146, D-P=-2648/1510, E-P=-2530/1523,
E-Q=-2530/1523, F-Q=-2648/1510, F-G=-3801/2146, G-R=-4181/2226, H-R=-4275/2212
BOT CHORD B-N=-1970/3839, M-N=-1560/3117, M-S=-1560/3117, S-T=-1560/3117, L-T=-1560/3117,
L-U=-1572/3117, U-V=-1572/3117, K-V=-1572/3117, J-K=-1572/3117, H-J=-1975/3839
WEBS E-L=-972/1430, F-L=-1037/562, F-J=-492/586, G-J=-559/213, D-L=-1037/562, D-N=-492/586,
C-N=-559/213
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=40ft; eave=5ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Exterior(2) -1-0-11 to 2-11-5, Interior(1) 2-11-5 to 20-0-0, Exterior(2) 20-0-0 to 24-0-0, Interior(1) 24-0-0 to
41-0-11 zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and
forces & MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
4) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members, with BCDL = 7.0psf.
5) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) B=792,
H=792.
6) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
B1
Truss Type
GABLE
Qty
2
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:44 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-7h?IbrB9ikAdmX3XH6lRb6N3?ff4RvVp6DGuj3zoTSj
Scale = 1:63.2
T2 T2
B1
W4
W3 W2 W1 W2
W3
W4
T1 T3
B3B2
ST11
ST12
ST9
ST10
ST8
ST6
ST7
ST5
ST3
ST4ST2
ST1
ST11
ST12
ST9
ST10
ST8
ST6
ST7
ST5
ST3
ST4 ST2
ST1
A
B
C
D
E
F
G
H
M L K J I
AZ
BA BB
BC
BD BE BF BG
5x8
5x6
5x8
5x6
3x4 3x8 3x4
5x6
5x6 5x6
9-6-0
9-6-0
19-0-0
9-6-0
28-6-0
9-6-0
37-9-0
9-3-0
-1-0-0
1-0-0
6-4-0
6-4-0
12-8-0
6-4-0
19-0-0
6-4-0
25-4-0
6-4-0
31-8-0
6-4-0
37-9-0
6-1-0
0-4-39-10-310-3-150-5-116.00 12
Plate Offsets (X,Y)-- [B:0-1-11,Edge], [D:0-4-0,0-3-0], [F:0-4-0,0-3-0], [J:0-3-0,0-3-4], [L:0-3-0,0-3-4]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.54
0.61
0.42
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.32
-0.47
0.14
0.28
(loc)
K-M
K-M
H
H-I
l/defl
>999
>953
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
Weight: 276 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
WEBS 2x4 DF Stud/Std *Except*
W2,W1: 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F
1.6E
OTHERS 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed or 3-0-2 oc purlins.
BOT CHORD Rigid ceiling directly applied or 4-11-12 oc bracing.
WEBS 1 Row at midpt D-K, E-K, F-K
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.(lb/size)B=1946/0-5-8 (min. 0-2-1), H=1834/Mechanical
Max Horz B=208(LC 11)
Max UpliftB=-755(LC 12), H=-701(LC 12)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
TOP CHORD B-AZ=-3468/1794, C-AZ=-3364/1809, C-D=-3089/1774, D-BA=-2171/1268, E-BA=-2041/1282,
E-BB=-2041/1288, F-BB=-2171/1274, F-G=-3081/1790, G-BC=-3304/1828, H-BC=-3430/1813
BOT CHORD B-M=-1542/2978, M-BD=-1219/2435, L-BD=-1219/2435, L-BE=-1219/2435, K-BE=-1219/2435,
K-BF=-1211/2431, J-BF=-1211/2431, J-BG=-1211/2431, I-BG=-1211/2431, H-I=-1548/2960
WEBS C-M=-456/183, D-M=-454/516, D-K=-881/505, E-K=-957/1334, F-K=-877/500, F-I=-466/513,
G-I=-446/192
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=38ft; eave=5ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Exterior(2) -1-0-13 to 2-8-8, Interior(1) 2-8-8 to 19-0-0, Exterior(2) 19-0-0 to 22-9-5, Interior(1) 22-9-5 to
37-8-4 zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and
forces & MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) Truss designed for wind loads in the plane of the truss only. For studs exposed to wind (normal to the face), see Standard Industry
Gable End Details as applicable, or consult qualified building designer as per ANSI/TPI 1.
4) All plates are 1.5x4 MT20 unless otherwise indicated.
5) Gable studs spaced at 2-0-0 oc.
6) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
7) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members, with BCDL = 7.0psf.
8) Refer to girder(s) for truss to truss connections.
9) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) B=755,
H=701.
10) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
B2
Truss Type
Common
Qty
17
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:46 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-33730XDPELQK?qDwOXovgXSPVTLYvo_6aXl?nyzoTSh
Scale = 1:63.2
T2 T2
B1
W4
W3
W2 W1 W2
W3
W4
T1 T3
B3B2A
B
C
D
E
F
G
H
M L K J I
N
O P
Q
R S T U
5x8
5x6
5x8
5x6
5x6 3x4
1.5x4
3x8 3x4
1.5x4
5x6
5x6
9-6-0
9-6-0
19-0-0
9-6-0
28-6-0
9-6-0
37-9-0
9-3-0
-1-0-0
1-0-0
6-4-0
6-4-0
12-8-0
6-4-0
19-0-0
6-4-0
25-4-0
6-4-0
31-8-0
6-4-0
37-9-0
6-1-0
0-4-39-10-310-3-150-5-116.00 12
Plate Offsets (X,Y)-- [B:0-1-11,Edge], [D:0-4-0,0-3-0], [F:0-4-0,0-3-0]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.54
0.61
0.42
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.32
-0.47
0.14
0.28
(loc)
K-M
K-M
H
H-I
l/defl
>999
>953
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
Weight: 176 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
WEBS 2x4 DF Stud/Std *Except*
W2,W1: 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F
1.6E
BRACING-
TOP CHORD Sheathed or 3-0-2 oc purlins.
BOT CHORD Rigid ceiling directly applied or 4-11-12 oc bracing.
WEBS 1 Row at midpt D-K, E-K, F-K
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.(lb/size)B=1946/0-5-8 (min. 0-2-1), H=1834/Mechanical
Max Horz B=208(LC 11)
Max UpliftB=-755(LC 12), H=-701(LC 12)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
TOP CHORD B-N=-3468/1794, C-N=-3364/1809, C-D=-3089/1774, D-O=-2171/1268, E-O=-2041/1282,
E-P=-2041/1288, F-P=-2171/1274, F-G=-3081/1790, G-Q=-3304/1828, H-Q=-3430/1813
BOT CHORD B-M=-1542/2978, M-R=-1219/2435, L-R=-1219/2435, L-S=-1219/2435, K-S=-1219/2435,
K-T=-1211/2431, J-T=-1211/2431, J-U=-1211/2431, I-U=-1211/2431, H-I=-1548/2960
WEBS C-M=-456/183, D-M=-454/516, D-K=-881/505, E-K=-957/1334, F-K=-877/500, F-I=-466/513,
G-I=-446/192
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=38ft; eave=5ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Exterior(2) -1-0-13 to 2-8-8, Interior(1) 2-8-8 to 19-0-0, Exterior(2) 19-0-0 to 22-9-5, Interior(1) 22-9-5 to
37-8-4 zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and
forces & MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
4) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members, with BCDL = 7.0psf.
5) Refer to girder(s) for truss to truss connections.
6) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) B=755,
H=701.
7) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
B3
Truss Type
Common
Qty
2
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:48 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-0SEpRDEglyg2F8NIWxqNlyXmOG01NigP1rE6sqzoTSf
Scale: 3/16"=1'
T2 T2
B1
W1 W2
W3
W4
W2
W3
W4
T1 T1
B1B2A
B
C
D
E
F
G
H
I
N M L K J
O
P Q
R
S T U V
5x8
5x6
5x8
5x6
5x6 3x8 3x4
1.5x4
3x4
1.5x4
5x6
5x6
9-6-0
9-6-0
19-0-0
9-6-0
28-6-0
9-6-0
38-0-0
9-6-0
-1-0-0
1-0-0
6-4-0
6-4-0
12-8-0
6-4-0
19-0-0
6-4-0
25-4-0
6-4-0
31-8-0
6-4-0
38-0-0
6-4-0
39-0-0
1-0-0
0-4-39-10-310-3-150-4-36.00 12
Plate Offsets (X,Y)-- [B:0-1-11,Edge], [D:0-4-0,0-3-0], [F:0-4-0,0-3-0], [H:0-1-11,Edge]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.51
0.61
0.41
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.32
-0.47
0.15
0.27
(loc)
L-N
L-N
H
L-N
l/defl
>999
>953
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
Weight: 179 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
WEBS 2x4 DF Stud/Std *Except*
W1,W2: 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F
1.6E
BRACING-
TOP CHORD Sheathed or 3-0-8 oc purlins.
BOT CHORD Rigid ceiling directly applied or 5-0-10 oc bracing.
WEBS 1 Row at midpt E-L, F-L, D-L
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.(lb/size)B=1948/0-5-8 (min. 0-2-1), H=1948/0-5-8 (min. 0-2-1)
Max Horz B=211(LC 11)
Max UpliftB=-755(LC 12), H=-755(LC 12)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
TOP CHORD B-O=-3472/1794, C-O=-3369/1809, C-D=-3094/1774, D-P=-2176/1269, E-P=-2046/1284,
E-Q=-2046/1284, F-Q=-2176/1269, F-G=-3094/1774, G-R=-3369/1809, H-R=-3472/1794
BOT CHORD B-N=-1517/2982, N-S=-1187/2440, M-S=-1187/2440, M-T=-1187/2440, L-T=-1187/2440,
L-U=-1202/2440, K-U=-1202/2440, K-V=-1202/2440, J-V=-1202/2440, H-J=-1524/2982
WEBS E-L=-953/1338, F-L=-881/504, F-J=-453/516, G-J=-456/183, D-L=-881/504, D-N=-453/516,
C-N=-456/183
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=38ft; eave=5ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Exterior(2) -1-0-13 to 2-8-13, Interior(1) 2-8-13 to 19-0-0, Exterior(2) 19-0-0 to 22-9-10, Interior(1) 22-9-10
to 39-0-13 zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and
forces & MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
4) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members, with BCDL = 7.0psf.
5) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) B=755,
H=755.
6) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
C1
Truss Type
GABLE
Qty
1
Ply
2
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:51 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-Q1wy3EGY2t3d6c5tB4N4Nb99WUz8axBrjpTmT9zoTSc
Scale = 1:56.9
T1 T1
B1
W1
W2
W3 W4
W1
W2W3
W4
ST3ST2
ST1
ST2
ST1
ST4
ST5
ST6
B2
A
B
C
D
E
F
G
K J I HWXYZAAABACAD AE AF
8x12 MT20HS
9x12 MT18HS
3x6
8x12 MT20HS12x12 12x12
3x4
12x12 12x12
1.5x4
3x6
2x4
1.5x4
3x6
4x8
3x6
2x4
1.5x4
3x6
7x10
4x12
1.5x4
3x6
1.5x4
1.5x4
3x6
Special
Special Special
Special
Special Special Special Special Special
Special Special
Special
4-8-6
4-8-6
9-4-13
4-8-6
14-1-3
4-8-6
18-9-10
4-8-6
23-6-0
4-8-6
3-11-0
3-11-0
7-10-0
3-11-0
11-9-0
3-11-0
15-8-0
3-11-0
19-7-0
3-11-0
23-6-0
3-11-0
0-6-38-4-30-6-38.00 12
Plate Offsets (X,Y)-- [A:0-3-4,Edge], [C:0-3-0,0-1-4], [D:0-3-0,0-4-2], [D:0-9-4,0-2-8], [E:0-6-0,0-2-12], [G:0-3-4,Edge], [H:0-6-0,0-7-12], [I:0-6-0,0-7-8], [J:0-6-0,0-7-12], [K:0-6-0
,0-7-8]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
NO
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.97
0.90
0.94
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.26
-0.36
0.07
0.20
(loc)
H-I
H-I
G
H-I
l/defl
>999
>769
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
MT20HS
MT18HS
Weight: 438 lb FT = 20%
GRIP
220/195
165/146
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x10 DF 1950F 1.7E or 2x10 DF SS
WEBS 2x4 DF Stud/Std *Except*
W1: 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
OTHERS 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed.
BOT CHORD Rigid ceiling directly applied or 10-0-0 oc bracing.
REACTIONS.(lb/size)A=12288/0-5-8 (req. 0-6-9), G=11810/0-5-8 (req. 0-6-5)
Max Horz A=173(LC 7)
Max UpliftA=-4648(LC 8), G=-4465(LC 8)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
TOP CHORD A-B=-15992/6024, B-C=-15794/6041, C-D=-12985/5017, D-E=-13022/5031, E-F=-16368/6258,
F-G=-16566/6241
BOT CHORD A-W=-4897/13067, W-X=-4897/13067, K-X=-4897/13067, K-Y=-4179/11273, Y-Z=-4179/11273,
J-Z=-4179/11273, J-AA=-3142/8640, AA-AB=-3142/8640, I-AB=-3142/8640, I-AC=-4224/11392,
AC-AD=-4224/11392, H-AD=-4224/11392, H-AE=-5077/13543, AE-AF=-5077/13543,
G-AF=-5077/13543
WEBS D-I=-2874/7354, E-I=-2194/869, E-H=-1654/4247, F-H=-309/292, D-J=-2834/7249,
C-J=-1886/753, C-K=-1393/3556, B-K=-308/288
NOTES-
1) 2-ply truss to be connected together with 10d (0.131"x3") nails as follows:
Top chords connected as follows: 2x4 - 1 row at 0-4-0 oc.
Bottom chords connected as follows: 2x10 - 3 rows staggered at 0-2-0 oc.
Webs connected as follows: 2x4 - 1 row at 0-9-0 oc.
2) All loads are considered equally applied to all plies, except if noted as front (F) or back (B) face in the LOAD CASE(S) section. Ply to ply
connections have been provided to distribute only loads noted as (F) or (B), unless otherwise indicated.
3) Unbalanced roof live loads have been considered for this design.
4) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=25ft; eave=4ft; Cat. II; Exp C; Enclosed;
MWFRS (directional); cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed; Lumber
DOL=1.33 plate grip DOL=1.33
5) Truss designed for wind loads in the plane of the truss only. For studs exposed to wind (normal to the face), see Standard Industry
Gable End Details as applicable, or consult qualified building designer as per ANSI/TPI 1.
6) All plates are MT20 plates unless otherwise indicated.
7) Gable studs spaced at 2-0-0 oc.
8) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
9) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members, with BCDL = 7.0psf.
10) WARNING: Required bearing size at joint(s) A, G greater than input bearing size.
11) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) A=4648
, G=4465.
Continued on page 2
Job
SAVANNAH CM 3C
Truss
C1
Truss Type
GABLE
Qty
1
Ply
2
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:52 2021 Page 2 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-uDUKHaHApBBUklg3lnuJwoiKGtJNJOQ?yTCJ?czoTSb
NOTES-
12) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced standard ANSI/TPI 1.
13) Hanger(s) or other connection device(s) shall be provided sufficient to support concentrated load(s) 1824 lb down and 695 lb up at 0-6-12, 1820 lb down and 693 lb up at
2-6-12, 1820 lb down and 693 lb up at 4-6-12, 1820 lb down and 693 lb up at 6-6-12, 1820 lb down and 693 lb up at 8-6-12, 1820 lb down and 693 lb up at 10-6-12, 1820 lb
down and 693 lb up at 12-6-12, 1820 lb down and 693 lb up at 14-6-12, 1820 lb down and 693 lb up at 16-6-12, 1820 lb down and 693 lb up at 18-6-12, and 1820 lb down
and 693 lb up at 20-6-12, and 1820 lb down and 693 lb up at 21-5-4 on bottom chord. The design/selection of such connection device(s) is the responsibility of others.
LOAD CASE(S) Standard
1) Dead + Roof Live (balanced): Lumber Increase=1.15, Plate Increase=1.15
Uniform Loads (plf)
Vert: A-D=-84, D-G=-84, A-G=-14
Concentrated Loads (lb)
Vert: H=-1820(B) K=-1820(B) W=-1824(B) X=-1820(B) Y=-1820(B) Z=-1820(B) AA=-1820(B) AB=-1820(B) AC=-1820(B) AD=-1820(B) AE=-1820(B) AF=-1820(B)
Job
SAVANNAH CM 3C
Truss
D1
Truss Type
GABLE
Qty
1
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:53 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-MP2iUwIoaVJLLvFGIVQYS0FjFHty23T8B7ytX2zoTSa
Scale = 1:40.8
T1 T1
B1
ST5
ST4
ST3
ST2
ST1
ST4
ST3
ST2
B1
ST1
A
B
C
D
E
F
G
H
I
J
K
L
M
V U T S R Q P O N
W
X Y
Z
4x5
3x4
5x6
3x4
23-6-0
23-6-0
-1-0-0
1-0-0
11-9-0
11-9-0
23-6-0
11-9-0
24-6-0
1-0-0
0-3-143-9-04-0-40-3-143.50 12
Plate Offsets (X,Y)-- [R:0-3-0,0-3-0]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.12
0.05
0.06
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
in
0.00
0.01
0.00
(loc)
M
M
L
l/defl
n/r
n/r
n/a
L/d
120
120
n/a
PLATES
MT20
Weight: 91 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
OTHERS 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed or 6-0-0 oc purlins.
BOT CHORD Rigid ceiling directly applied or 10-0-0 oc bracing.
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.All bearings 23-6-0.
(lb) - Max Horz B=43(LC 11)
Max Uplift All uplift 100 lb or less at joint(s) B, S, T, U, V, Q, P, O, L, N
Max Grav All reactions 250 lb or less at joint(s) R, S, T, U, Q, P, O except B=255(LC 1), V=349(LC 1), L=255(LC
1), N=349(LC 1)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
WEBS C-V=-281/145, K-N=-281/145
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=25ft; eave=2ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Corner(3) -1-0-8 to 1-11-8, Exterior(2) 1-11-8 to 11-9-0, Corner(3) 11-9-0 to 14-9-0, Exterior(2) 14-9-0 to
24-6-8 zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and
forces & MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) Truss designed for wind loads in the plane of the truss only. For studs exposed to wind (normal to the face), see Standard Industry
Gable End Details as applicable, or consult qualified building designer as per ANSI/TPI 1.
4) All plates are 1.5x4 MT20 unless otherwise indicated.
5) Gable requires continuous bottom chord bearing.
6) Gable studs spaced at 2-0-0 oc.
7) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
8) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members.
9) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) B, S, T, U, V, Q, P, O,
L, N.
10) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
D2
Truss Type
Common
Qty
3
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:55 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-IoATvcK366Z3bDPeQwS0XRKzC5QHWuSReRRzcwzoTSY
Scale = 1:39.0
T1 T2
B1
W1
W2
W1
W2
B2
A
B
C
D
E
F
H G
I
J K
L
3x8
5x6
5x6
1.5x4
3x4
1.5x4
3x8
7-10-0
7-10-0
15-8-0
7-10-0
23-6-0
7-10-0
5-10-8
5-10-8
11-9-0
5-10-8
17-7-8
5-10-8
23-6-0
5-10-8
24-6-0
1-0-0
0-3-143-9-04-0-40-3-143.50 12
Plate Offsets (X,Y)-- [A:0-0-13,Edge], [E:0-0-13,Edge], [G:0-3-0,0-3-0]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.47
0.57
0.34
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.23
-0.35
0.09
0.24
(loc)
G-H
G-H
E
G-H
l/defl
>999
>797
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
Weight: 87 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
WEBS 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed or 3-4-12 oc purlins.
BOT CHORD Rigid ceiling directly applied or 4-7-8 oc bracing.
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.(lb/size)A=1135/0-3-8 (min. 0-1-8), E=1239/0-3-8 (min. 0-1-8)
Max Horz A=-45(LC 10)
Max UpliftA=-434(LC 12), E=-484(LC 12)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
TOP CHORD A-I=-3141/1951, B-I=-3068/1960, B-J=-2671/1852, C-J=-2595/1859, C-K=-2580/1845,
D-K=-2655/1838, D-L=-3060/1948, E-L=-3120/1938
BOT CHORD A-H=-1833/2949, G-H=-1176/1930, E-G=-1831/2928
WEBS C-G=-658/763, D-G=-613/207, C-H=-664/780, B-H=-622/208
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=25ft; eave=4ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Exterior(2) 0-1-12 to 3-1-12, Interior(1) 3-1-12 to 11-9-0, Exterior(2) 11-9-0 to 14-9-0, Interior(1) 14-9-0 to
24-6-8 zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and
forces & MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
4) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members.
5) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) A=434,
E=484.
6) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
E1
Truss Type
Common Supported Gable
Qty
1
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:57 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-FBHDKILJejpnqXZ1XKUUcsPP?uEE_tdk6kw4gpzoTSW
Scale = 1:29.8
T1 T1
B1
ST3
ST2
ST1
ST2
ST1
HW1 HW1
A
B
C
D
E
F
G
H
I
N M L K J
4x5
3x4
3x8
3x4
3x8
12-6-0
12-6-0
-1-0-0
1-0-0
6-3-0
6-3-0
12-6-0
6-3-0
13-6-0
1-0-0
0-6-34-8-35-2-30-6-38.00 12
Plate Offsets (X,Y)-- [B:0-0-0,0-0-12], [B:0-1-15,Edge], [H:Edge,0-0-12], [H:0-1-15,Edge]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.07
0.03
0.05
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
in
-0.00
-0.00
0.00
(loc)
I
I
H
l/defl
n/r
n/r
n/a
L/d
120
120
n/a
PLATES
MT20
Weight: 59 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
OTHERS 2x4 DF Stud/Std
WEDGE
Left: 2x4 DF Stud/Std , Right: 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed or 6-0-0 oc purlins.
BOT CHORD Rigid ceiling directly applied or 10-0-0 oc bracing.
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.All bearings 12-6-0.
(lb) - Max Horz B=108(LC 11)
Max Uplift All uplift 100 lb or less at joint(s) B, H, M, N, K, J
Max Grav All reactions 250 lb or less at joint(s) B, H, L, M, N, K, J
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=25ft; eave=2ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Corner(3) -1-1-0 to 1-11-0, Exterior(2) 1-11-0 to 6-3-0, Corner(3) 6-3-0 to 9-3-0, Exterior(2) 9-3-0 to 13-7-0
zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and forces &
MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) Truss designed for wind loads in the plane of the truss only. For studs exposed to wind (normal to the face), see Standard Industry
Gable End Details as applicable, or consult qualified building designer as per ANSI/TPI 1.
4) All plates are 1.5x4 MT20 unless otherwise indicated.
5) Gable requires continuous bottom chord bearing.
6) Gable studs spaced at 2-0-0 oc.
7) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
8) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members.
9) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) B, H, M, N, K, J.
10) Beveled plate or shim required to provide full bearing surface with truss chord at joint(s) B.
11) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
F1
Truss Type
Common Supported Gable
Qty
1
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 14:59:58 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-jNrbXdMxP1xeSg8D52?j93yalIaNjKwtKOfeCFzoTSV
Scale = 1:26.5
T1 T1
B1
ST3
ST2
ST1
ST2
ST1
HW1 HW1
A
B
C
D
E
F
G
H
I
N M L K J
4x5
3x4
3x8
3x4
3x8
10-10-0
10-10-0
-1-0-0
1-0-0
5-5-0
5-5-0
10-10-0
5-5-0
11-10-0
1-0-0
0-6-34-1-84-7-90-6-38.00 12
Plate Offsets (X,Y)-- [B:Edge,0-0-12], [B:0-1-15,Edge], [H:Edge,0-0-12], [H:0-1-15,Edge]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.07
0.03
0.04
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
in
-0.00
-0.00
0.00
(loc)
I
I
H
l/defl
n/r
n/r
n/a
L/d
120
120
n/a
PLATES
MT20
Weight: 51 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
OTHERS 2x4 DF Stud/Std
WEDGE
Left: 2x4 DF Stud/Std , Right: 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed or 6-0-0 oc purlins.
BOT CHORD Rigid ceiling directly applied or 10-0-0 oc bracing.
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.All bearings 10-10-0.
(lb) - Max Horz B=-96(LC 10)
Max Uplift All uplift 100 lb or less at joint(s) B, H, M, N, K, J
Max Grav All reactions 250 lb or less at joint(s) B, H, L, M, N, K, J
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
NOTES-
1) Unbalanced roof live loads have been considered for this design.
2) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=25ft; eave=2ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Corner(3) -1-1-0 to 1-11-0, Exterior(2) 1-11-0 to 5-5-0, Corner(3) 5-5-0 to 8-5-0, Exterior(2) 8-5-0 to
11-11-0 zone; cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed;C-C for members and
forces & MWFRS for reactions shown; Lumber DOL=1.33 plate grip DOL=1.33
3) Truss designed for wind loads in the plane of the truss only. For studs exposed to wind (normal to the face), see Standard Industry
Gable End Details as applicable, or consult qualified building designer as per ANSI/TPI 1.
4) All plates are 1.5x4 MT20 unless otherwise indicated.
5) Gable requires continuous bottom chord bearing.
6) Gable studs spaced at 2-0-0 oc.
7) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
8) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members.
9) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) B, H, M, N, K, J.
10) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
F2
Truss Type
Common Girder
Qty
1
Ply
2
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 15:00:00 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-fmzMyJNCxeBLh_HcDT2BEU1sT6AQB81Aoi8kH8zoTST
Scale = 1:25.8
T1 T1
B1
W1
A
B
C
DEF G H I
5x8
5x6
5x8 4x12 Special Special
Special
Special
Special
5-5-0
5-5-0
10-10-0
5-5-0
5-5-0
5-5-0
10-10-0
5-5-0
0-6-34-1-80-6-38.00 12
Plate Offsets (X,Y)-- [A:0-4-0,0-1-9], [C:0-4-0,0-1-9], [D:0-7-12,0-2-0]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
NO
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-SH
0.31
0.44
0.39
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.05
-0.07
0.01
0.04
(loc)
C-D
C-D
C
C-D
l/defl
>999
>999
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
Weight: 122 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x10 DF 1950F 1.7E or 2x10 DF SS
WEBS 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BRACING-
TOP CHORD Sheathed or 5-10-11 oc purlins.
BOT CHORD Rigid ceiling directly applied or 10-0-0 oc bracing.
REACTIONS.(lb/size)A=4491/0-5-8 (min. 0-2-6), C=5627/0-5-8 (min. 0-3-0)
Max Horz A=-79(LC 6)
Max UpliftA=-1698(LC 8), C=-2129(LC 8)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
TOP CHORD A-B=-5354/2005, B-C=-5353/2005
BOT CHORD A-E=-1585/4312, E-F=-1585/4312, D-F=-1585/4312, D-G=-1585/4312, G-H=-1585/4312, H-I=-1585/4312, C-I=-1585/4312
WEBS B-D=-2136/5486
NOTES-
1) 2-ply truss to be connected together with 10d (0.131"x3") nails as follows:
Top chords connected as follows: 2x4 - 1 row at 0-9-0 oc.
Bottom chords connected as follows: 2x10 - 2 rows staggered at 0-2-0 oc.
Webs connected as follows: 2x4 - 1 row at 0-9-0 oc.
2) All loads are considered equally applied to all plies, except if noted as front (F) or back (B) face in the LOAD CASE(S) section. Ply to ply
connections have been provided to distribute only loads noted as (F) or (B), unless otherwise indicated.
3) Unbalanced roof live loads have been considered for this design.
4) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=25ft; eave=4ft; Cat. II; Exp C; Enclosed;
MWFRS (directional); cantilever left and right exposed ; end vertical left and right exposed; porch left and right exposed; Lumber
DOL=1.33 plate grip DOL=1.33
5) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
6) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members.
7) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) A=1698,
C=2129.
8) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
9) Hanger(s) or other connection device(s) shall be provided sufficient to support concentrated load(s) 1820 lb down and 693 lb up at
2-0-12, 1820 lb down and 693 lb up at 4-0-12, 1820 lb down and 693 lb up at 6-0-12, and 1820 lb down and 693 lb up at 8-0-12, and
1823 lb down and 695 lb up at 10-0-12 on bottom chord. The design/selection of such connection device(s) is the responsibility of
others.
LOAD CASE(S) Standard
1) Dead + Roof Live (balanced): Lumber Increase=1.15, Plate Increase=1.15
Uniform Loads (plf)
Vert: A-B=-84, B-C=-84, A-C=-14
Continued on page 2
Job
SAVANNAH CM 3C
Truss
F2
Truss Type
Common Girder
Qty
1
Ply
2
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 15:00:01 2021 Page 2 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-7yXkAfOqiyJCJ8somAZQnia1CWVfwbHJ1MuIpazoTSS
LOAD CASE(S) Standard
Concentrated Loads (lb)
Vert: E=-1820(B) F=-1820(B) G=-1820(B) H=-1820(B) I=-1823(B)
Job
SAVANNAH CM 3C
Truss
J1
Truss Type
Monopitch
Qty
2
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 15:00:02 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-b856N?PSSGR3wIR_Ku4fJv68Fvnhf8ZTF0drL0zoTSR
Scale = 1:16.3
T1
W1
B1
HW1
A
B
C
D
E
F
1.5x4
2x4
3x6
1.5x4
0-6-0
0-6-0
5-10-8
5-4-8
-1-0-0
1-0-0
5-10-8
5-10-8
6-0-0
0-1-8
0-4-142-7-142-11-42-4-60-3-82-7-144.50 12
Plate Offsets (X,Y)-- [B:0-1-2,0-0-3], [B:0-0-5,0-10-15]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-P
0.55
0.65
0.00
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.06
-0.09
0.00
0.11
(loc)
B-D
B-D
D
B-D
l/defl
>999
>723
n/a
>636
L/d
360
240
n/a
240
PLATES
MT20
Weight: 22 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
WEBS 2x4 DF Stud/Std
WEDGE
Left: 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed or 5-10-8 oc purlins, except end verticals.
BOT CHORD Rigid ceiling directly applied or 10-0-0 oc bracing.
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.(lb/size)B=391/0-3-8 (min. 0-1-8), D=269/0-1-8 (min. 0-1-8)
Max Horz B=94(LC 9)
Max UpliftB=-157(LC 12), D=-105(LC 12)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
NOTES-
1) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=25ft; eave=4ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Exterior(2) -1-0-10 to 1-11-6, Interior(1) 1-11-6 to 5-10-4 zone; cantilever left and right exposed ; end
vertical left and right exposed; porch left and right exposed;C-C for members and forces & MWFRS for reactions shown; Lumber
DOL=1.33 plate grip DOL=1.33
2) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
3) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members.
4) Bearing at joint(s) D considers parallel to grain value using ANSI/TPI 1 angle to grain formula. Building designer should verify capacity of
bearing surface.
5) Provide mechanical connection (by others) of truss to bearing plate at joint(s) D.
6) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) except (jt=lb) B=157,
D=105.
7) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard
Job
SAVANNAH CM 3C
Truss
J2
Truss Type
Monopitch
Qty
6
Ply
1
KARTCHNER SAVANNAH CM 3C
Job Reference (optional)
8.420 s Dec 1 2020 MiTek Industries, Inc. Thu Feb 4 15:00:03 2021 Page 1 BMC WEST (IDAHO FALLS), IDAHO FALLS, ID 83402
ID:o2JzxLaBl_ZuNw9ih9_LsCz9M_B-3KeUbLQ4DZZwYS0Bubbus7fM1JBdObpcUgNOuTzoTSQ
Scale: 1"=1'
T1
W1
B1
HW1
A
B
C
D
E
F
1.5x4
2x4 3x6
1.5x4
0-6-0
0-6-0
3-10-8
3-4-8
-1-0-0
1-0-0
3-10-8
3-10-8
4-0-0
0-1-8
0-4-141-10-142-2-41-7-60-3-81-10-144.50 12
Plate Offsets (X,Y)-- [B:0-1-2,0-0-3], [B:0-0-5,0-10-15]
LOADING (psf)
TCLL
TCDL
BCLL
BCDL
35.0
7.0
0.0 *
7.0
SPACING-
Plate Grip DOL
Lumber DOL
Rep Stress Incr
Code
2-0-0
1.15
1.15
YES
IRC2015/TPI2014
CSI.
TC
BC
WB
Matrix-P
0.36
0.41
0.00
DEFL.
Vert(LL)
Vert(CT)
Horz(CT)
Wind(LL)
in
-0.01
-0.02
0.00
0.02
(loc)
B-D
B-D
D
B-D
l/defl
>999
>999
n/a
>999
L/d
360
240
n/a
240
PLATES
MT20
Weight: 15 lb FT = 20%
GRIP
220/195
LUMBER-
TOP CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
BOT CHORD 2x4 DF 1800F 1.6E or 2x4 DF No.1&Btr or 2x4 DF-N 1800F 1.6E
WEBS 2x4 DF Stud/Std
WEDGE
Left: 2x4 DF Stud/Std
BRACING-
TOP CHORD Sheathed or 3-10-8 oc purlins, except end verticals.
BOT CHORD Rigid ceiling directly applied or 10-0-0 oc bracing.
MiTek recommends that Stabilizers and required cross bracing
be installed during truss erection, in accordance with Stabilizer
Installation guide.
REACTIONS.(lb/size)B=298/0-3-8 (min. 0-1-8), D=165/0-1-8 (min. 0-1-8)
Max Horz B=65(LC 9)
Max UpliftB=-123(LC 12), D=-63(LC 12)
FORCES.(lb) - Max. Comp./Max. Ten. - All forces 250 (lb) or less except when shown.
NOTES-
1) Wind: ASCE 7-10; Vult=115mph Vasd=91mph; TCDL=4.2psf; BCDL=4.2psf; h=25ft; B=45ft; L=25ft; eave=4ft; Cat. II; Exp C; Enclosed;
MWFRS (directional) and C-C Exterior(2) -1-0-10 to 1-11-6, Interior(1) 1-11-6 to 3-10-4 zone; cantilever left and right exposed ; end
vertical left and right exposed; porch left and right exposed;C-C for members and forces & MWFRS for reactions shown; Lumber
DOL=1.33 plate grip DOL=1.33
2) This truss has been designed for a 10.0 psf bottom chord live load nonconcurrent with any other live loads.
3) * This truss has been designed for a live load of 20.0psf on the bottom chord in all areas where a rectangle 3-6-0 tall by 2-0-0 wide will fit
between the bottom chord and any other members.
4) Bearing at joint(s) D considers parallel to grain value using ANSI/TPI 1 angle to grain formula. Building designer should verify capacity of
bearing surface.
5) Provide mechanical connection (by others) of truss to bearing plate at joint(s) D.
6) Provide mechanical connection (by others) of truss to bearing plate capable of withstanding 100 lb uplift at joint(s) D except (jt=lb)
B=123.
7) This truss is designed in accordance with the 2015 International Residential Code sections R502.11.1 and R802.10.2 and referenced
standard ANSI/TPI 1.
LOAD CASE(S) Standard