The URL can be used to link to this page

Home My WebLink AboutWALL SYSTEM - 08-00082 - Electrical WholesaleKorfil Hill Masonry Wall System Description Basic Use: The HI -R Wall System is a specially designed concrete masonry unit and individually molded insulation insert. The block and the insulation are com- bined at the block manufacturing plant prior to delivery to the job site. The assembly provides a wall system capa- ble of achieving higher thermal R -values than conven- tional masonry, with no effect on the structural integrity of masonry construction. Product Advantages: The Hi -R Wall System: • Provides guaranteed consistent insulation value • Permits excess moisture to escape • Allows easy installation of pipes, conduits, etc. • Improves dewpoint • Improves sound resistance • Eliminates concern of shrinkage, toxic fumes or odors • Improves the ability of blocks to resist wind -driven rain • Can be used above or below grade • No lost time or rework if inspection rejects the quality of on-site workmanship • Work by other trades is performed with little danger of damage to insulation • The block itself can be used as a bond beam Limitations: Expanded polystyrene products of any type should not be exposed to temperatures in excess of 184°F Hi -R Inserts are made from flame-retardant treated expandable polystyrene. Like all foamed plastics, good fire procedures must be followed during storage and installation. Inserts give off no toxic products of combus- tion, except carbon monoxide and carbon dioxide, con- centrations of which are far less than those given off by equal volumes of wood products. Expandable poly- styrene contains no fluorocarbons and no formaldehyde. Composition and Materials: Masonry Units: Plain Faced, as well as Decorative Faced; Units in 8, 10 and 12 -inch �n n P rrT) O Electrical Wholesale widths with nominal 9'x 16" face dimensions, conform- ing to ASTM C 90-05. Hi -R Inserts are individually molded from expandable polystyrene in a minimum density of 1.3 lbs. per cu. ft. Inserts are packaged at the point of manufacture in heat -sealed, clear polyethylene bags. Applicable Standards: • ASTM C 578-04a, Type X, replacing Federal Specifications HH -1-524C. Specification for Rigid Cellular Polystyrene Thermal Insulation. • ASTM C 90-05 Standard Specification for Loadbearing Concrete Masonry Units. Technical Data: The Thermal Properties tables show the thermal resistance (Rt), including inside and outside air surface resistances of .68 and .17 hr -ft' °F/BTU, respec- tively, and the U -values for various densities of concrete masonry units. See Thermal Properties charts. Physical Characteristics: See Physical Properties chart below Typical Density lbs./cu. ft. 1.3 Thermal Resistance(R) per inch of thickness at 750 5.00 Water Vapor Permeance per inch of thickness 1.1 Water Absorption % Volume <1.0 Flame Spread Rating* <5.0 - i nis numerical flame spread is not intended to reflect hazards presented by this or any other material under actual conditions. Installation Preparatory Work: Mone required. Inserts are placed in blocks prior to delivery to the job site. Inserts do not affect the handling of blocks so no added labor is involved. Precautions: During storage and installation, good fire safety procedures should be followed. Care should be taken to make certain all broken or damaged inserts are replaced. `Thermal Properties:A Preinsulated Hi -R Masonry Units. U -values are based on conventional 3/8" Mortar Joint Construction, U -value units are Btu/hr/sgft/degF Hi -R Wall System only. •' Hi -R Wall System, 1/2 inch gypsum board on furring strips. HI -R Wall System, 1/2 inch foil -backed gypsum board on furring strips. Availability and Cost Availability: The HI -R Masonry Wall System is manufac- tured under protection of a United States Patent. It is sold only to concrete block manufacturers. Contact a CBIS/KORFIL representative for order and delivery information. The HI -R Masonry Wall System is nonpro- prietary. Cost: Specific price information is available only through local block manufacturers. Warranty: Hi -R Inserts are warranted to meet published specifications at the time of delivery. For further informa- tion, contact a CBIS/KORFIL representative. Maintenance: No maintenance is necessary. Technical Services: Support is provided by full-time, technically -trained CBIS/KORFIL sales representatives and technical service personnel, backed by a central research and development department and technical service staff. p' ■ E! ICorfil�.. Protection is a concrete idea. 8 Inch wide HI -R Wall System DENSITY OF Wall Typet' Wall Type 2" Wall Type 3"' BLOCK-LBS/FP Fr U R7 U Rt U 80 13.62 0.073 15.02 0.067 16.45 DENSITY OF BLOCK-LBSIM Wall Type 1' Rt U Wall Type 2" Rl U Wall Type 3"' R7 U 80 12.21 0.082 13.61 0.074 15.04 0.067 100 10.27 0.097 11.67 0.086 13.10 0.076 120 8.50 0.118 9.90 0.101 11.33 1 0.088 Hi -R Wall System only. •' Hi -R Wall System, 1/2 inch gypsum board on furring strips. HI -R Wall System, 1/2 inch foil -backed gypsum board on furring strips. Availability and Cost Availability: The HI -R Masonry Wall System is manufac- tured under protection of a United States Patent. It is sold only to concrete block manufacturers. Contact a CBIS/KORFIL representative for order and delivery information. The HI -R Masonry Wall System is nonpro- prietary. Cost: Specific price information is available only through local block manufacturers. Warranty: Hi -R Inserts are warranted to meet published specifications at the time of delivery. For further informa- tion, contact a CBIS/KORFIL representative. Maintenance: No maintenance is necessary. Technical Services: Support is provided by full-time, technically -trained CBIS/KORFIL sales representatives and technical service personnel, backed by a central research and development department and technical service staff. p' ■ E! ICorfil�.. Protection is a concrete idea. 12 Inch wide HI -R Wall System DENSITY OF Wall Typet' Wall Type 2" Wall Type 3"' BLOCK-LBS/FP Fr U R7 U Rt U 80 13.62 0.073 15.02 0.067 16.45 DENSITY OF BLOCK-LBS/FT' Wall Type 1 RE U Wall Type 2" Rt U Wall Type 3"• R, U 80 14.56 0.069 15.96 0.063 17.39 0.058 100 12.48 0.080 13.88 0.072 15.31 0.065 120 10.50 0.095 11.90 0.084 13.33 0.075 Hi -R Wall System only. •' Hi -R Wall System, 1/2 inch gypsum board on furring strips. HI -R Wall System, 1/2 inch foil -backed gypsum board on furring strips. Availability and Cost Availability: The HI -R Masonry Wall System is manufac- tured under protection of a United States Patent. It is sold only to concrete block manufacturers. Contact a CBIS/KORFIL representative for order and delivery information. The HI -R Masonry Wall System is nonpro- prietary. Cost: Specific price information is available only through local block manufacturers. Warranty: Hi -R Inserts are warranted to meet published specifications at the time of delivery. For further informa- tion, contact a CBIS/KORFIL representative. Maintenance: No maintenance is necessary. Technical Services: Support is provided by full-time, technically -trained CBIS/KORFIL sales representatives and technical service personnel, backed by a central research and development department and technical service staff. p' ■ E! ICorfil�.. Protection is a concrete idea. 12 Inch Cavity Wall, 4 Inch Dense Outer Wythe, 3/4 inch Air Space, 8 inch wide HI -R Unit 10 inch wide HI.R Wall System DENSITY OF Wall Typet' Wall Type 2" Wall Type 3"' BLOCK-LBS/FP Fr U R7 U Rt U 80 13.62 0.073 15.02 0.067 16.45 DENSITY OF BLOOk-LBS/FP Wall Typel' R1 U Wall Type2" R1 U Wall Type 3•" N U s0 13.92 0.072 15.32 0.065 16.75 0.060 100 11.87 0.084 13.27 0.075 14.70 0.068 120 9.95 0.100 11.35 0.088 12.78 0.078 12 Inch Cavity Wall, 4 Inch Dense Outer Wythe, 3/4 inch Air Space, 8 inch wide HI -R Unit DENSITY OF Wall Typet' Wall Type 2" Wall Type 3"' BLOCK-LBS/FP Fr U R7 U Rt U 80 13.62 0.073 15.02 0.067 16.45 0.061 100 11.68 1 0.086 13.08 1 0.077 14.51 1 0.069 120 _;;70of 11.31 0.088 12.74 0.079 A A third parry thermal analysis was completed making use of the Hot Box Test Data from three accredited laboratory servic- es. A complete Engineering Report dated November 20, 1996, including Addendum Added Nov. 1, 2002, is available upon request. it covers the thermal values of the HI -R Masonry Wall Systems. Filing Systems • Sweet's Catalog 07210/CON • For further information, contact CBIS/KORFIL, Inc. Hi -IR is a registered trademark of CONCRETE BLOCK INSULATING SYSTEMS, INC. We hope the Information given here will be helpful. It is based on data and knowledge considered to be true and accurate and is offered for the user's considera- tion, investigation and verification. Nothing contained herein constitutes a representation but we do not war- rant the results to be obtained. Please read all state- ments, recommendations or suggestions in conjunc- tion with our Conditions of Sale which apply to all goods supplied by us. No statement, recommendation or suggestion is intended for any use which would Infringe any patent or copyright. SEE US IN DIRECTORY CATALOG CD SHEETS.COM FILES Concrete Block Insulating Systems P.O. Box 1000 508.867.4241 www.cbisinc.com Freight House Road 800.628.8476 E-mail: korfil@cbisint.com West Brookfield, MA 01585-1000 Fax: 508.867.5702 Member of NCMA, SPI and EPSMA