HomeMy WebLinkAboutRESCHECK - 20-00659 - 991 Pine Brook Ln - New SFRREScheck Software Version 4.6.5
Compliance Certificate
Project Snyder - Cooper
Energy Code:2015 IECC
Location:Idaho Falls, Idaho
Construction Type:Single-family
Project Type:New Construction
Conditioned Floor Area:4,697 ft2
Glazing Area 15%
Climate Zone:6 (7918 HDD)
Permit Date:
Construction Site:Owner/Agent:
Sprinter Heating & Hydronics
Designer/Contractor:
Mechanical Compliance Solutions
Gene Miller
4181 Aschli lane
Idaho Falls, ID 83406
208-881-3243
1sgmiller@cableone.net
Permit Number:
Compliance: Passes using UA trade-off
0.2% Better Than Code Maximum UA:460 Your UA:459
The % Better or Worse Than Code Index reflects how close to compliance the house is based on code trade-off rules.
It DOES NOT provide an estimate of energy use or cost relative to a minimum-code home.
Compliance:
Envelope Assemblies
Assembly
Gross Area
or
Perimeter
Cavity
R-Value
Cont.
R-Value U-Factor UA
Wall 1: Wood Frame, 16" o.c.873 21.0 0.0 0.057 43
Door 1: Solid 53 0.140 7
Window 1: 2 glazing, clr low-e outr, argon gas, insulated vinyl frm mat, clr 70 0.320 22
Wall 2: Wood Frame, 16" o.c.745 21.0 0.0 0.057 42
Window 1: 2 glazing, clr low-e outr, argon gas, insulated vinyl frm mat, clr 12 0.310 4
Wall 3: Wood Frame, 16" o.c.873 21.0 0.0 0.057 32
Window 1: 2 glazing, clr low-e outr, argon gas, insulated vinyl frm mat, clr 305 0.310 95
Wall 4: Wood Frame, 16" o.c.745 21.0 0.0 0.057 37
Door 1: Solid 42 0.140 6
Window 1: 2 glazing, clr low-e outr, argon gas, insulated vinyl frm mat, clr 46 0.310 14
Basement Wall 1: Solid Concrete or Masonry
Wall height: 9.0'
Depth below grade: 8.0'
Insulation depth: 9.0'
508 19.0 0.0 0.044 22
Basement Wall 2: Solid Concrete or Masonry
Wall height: 9.0'
Depth below grade: 8.0'
Insulation depth: 9.0'
468 19.0 0.0 0.044 21
Project Title: Snyder - Cooper
Data filename: C:\Users\1sgmi\AppData\Local\Check\REScheck\Snyder - Cooper.rck Page 1 of 2
09/03/20Report date:
Assembly
Gross Area
or
Perimeter
Cavity
R-Value
Cont.
R-Value U-Factor UA
Basement Wall 3: Solid Concrete or Masonry
Wall height: 9.0'
Depth below grade: 8.0'
Insulation depth: 9.0'
508 19.0 0.0 0.044 21
Window 1: 2 glazing, clr low-e outr, argon gas, insulated vinyl frm mat, clr 32 0.310 10
Basement Wall 4: Solid Concrete or Masonry
Wall height: 9.0'
Depth below grade: 8.0'
Insulation depth: 9.0'
468 19.0 0.0 0.044 19
Window 1: 2 glazing, clr low-e outr, argon gas, insulated vinyl frm mat, clr 32 0.310 10
Ceiling 1: Flat Ceiling or Scissor Truss 2,087 50.0 0.0 0.026 54
Name - Title Signature Date
Compliance Statement: The proposed building design described here is consistent with the building plans, specifications, and other
calculations submitted with the permit application. The proposed building has been designed to meet the 2015 IECC requirements in
REScheck Version 4.6.5 and to comply with the mandatory requirements listed in the REScheck Inspection Checklist.
Project Notes:
Job Number: Snyder - Cooper
INFORMATION CONTAINED WITHIN THE REPORT IS PER THE RESCHECK COMPLIANCE CERTIFICATE. IF ANY OF THESE
VALUES SHOULD CHANGE, THIS REPORT WILL BE NULL AND VOID.
Project Title: Snyder - Cooper
Data filename: C:\Users\1sgmi\AppData\Local\Check\REScheck\Snyder - Cooper.rck Page 2 of 2
09/03/20Report date: