Loading...
HomeMy WebLinkAboutMANUAL PULL STATION PRODUCT INFO - 20-00467 - Les Schwab - Fire Alarm replacement.pdfFEATURES Fire Alarm Pull Stations 850S & 850D DMP.COM @DMPALARMS ▸Approvals: UL and CSFM ▸Americans with Disabilities Act (ADA) Compliant ▸Die-cast metal construction ▸Reset Key ▸Mounts on standard single-gang box ▸Optional surface and weatherproof backboxes available ▸High-gloss red enamel finish ▸Scored acrylic breakrod ▸Available in single or dual-action manual pulls ▸SPST contacts and terminal strip connections ▸Cold-plated contacts to avoid the risk of corrosion 850D 850S SERIES 850 FIRE ALARM PULL STATION Specifications Dimensions 3.25" W × 4.75" H × 2.25" D Color Red w/ raised white letters, white PULL handle 2/ raised red letters Switch Rating 1 Amp @ 30 VDC Compatibility The 850 Series Fire Pull Station is compatible with all DMP Control Panels Ordering Information 850S: Single-action pull station 850D: Dual-action pull station 850-SB: Interior surface sheetmetal backbox 850-WP: Weatherproof surface die-cast backbox 850-AR: Scored acrylic breakrods (one dozen) 850S/711: Single-action pull station w/ addressable module 850S/711S: Zone expansion modulew/ addressable module 850D/711: Dual-action pull station w/ addressable module 850D/711S: Zone expansion modulew/ addressable module Note: All models are supplied with one scored acrylic breakrod and one key. For additional information, go to DMP.com/Compliance DESCRIPTION The DMP Fire Alarm Pull Station is a high-quality, die-cast metal manual pull station available in either single-action or dual-action configurations with SPST contacts and terminal strip connections. The normally open contact, which closes when the pull station is activated, is rated for 1 Amp @ 30 VDC. The contacts are gold-plated to avoid corrosion risks. Scored acrylic breakrods are used with the 850 Series. COMPLIANCE The 850 Series has been tested by UL for compliance to the latest requirements of the ADA. MOUNTING OPTIONS A variety of mounting options are available for the 850 Series. It can be flush mounted to a standard single gang switch box or surface mounted in two optional configurations. The Model 850-SB Interior Surface Mount Backbox or the Model 850-WP Weatherproof Backbox both allow conduit connection to the 850 Series pull stations. 850S OPERATION The Model 850S Single Action Pull Station is operated by pulling the handle on the front of the station as far down as it goes. When the handle locks into place, it is easily visible from up to 50 feet. Reset the handle by opening the station with the supplied key, placing the handle in the normal upright position and re-locking the station. 850D OPERATION On the Model 850D Dual Action Pull Station, the push bar rotates inward allowing the PULL handle to be grasped in a one-handed motion. ADDRESSABLE ZONE To create an addressable reporting zone for the 850 Series, install a Model 711 or 711S Zone Expansion Module. © 2019 Digital Monitoring Products, Inc. | LT-0457 | 19172 800-641-4282 | DMP.com 2500 N. Partnership Blvd, Springfield, MO 65803 Designed, engineered & manufactured in Springfield, MO using U.S. & global components LIMITED WARRANTY: DMP warrants that the products manufactured by DMP and described herein shall be free from defects of manufacture, labeling, and packaging for a period of three (3) years from the invoice date to the original Buyer, provided that representative samples of the defective products are returned to DMP for inspection…To read the full DMP Limited Warranty, go to DMP.com/Warranty or check the DMP Price List or Catalog. Model 850 Wiring Diagram PULL Screw Terminals To Next Device Or EOL Resistor To Fire Alarm Control Panel