Loading...
HomeMy WebLinkAboutASBESTOS REPORT - 20-00095 - 431 S 2nd W - DemolitionApproved by: Approved Signatory Renee Luna-Trepczynski Report for: Mr. Jeff Parsons Healthy Home Environmental 2300 N. Yellowstone Hwy Suite B3 Idaho Falls, ID 83401 Regarding:Project: 003010; 431 S 2nd W EML ID: 2376136 All samples were received in acceptable condition unless noted in the Report Comments portion in the body of the report. The results relate only to the samples as received. The results include an inherent uncertainty of measurement associated with estimating percentages by polarized light microscopy. Measurement uncertainty data for sample results with >1% asbestos concentration can be provided when requested. Eurofins EMLab P&K ("the Company") shall have no liability to the client or the client's customer with respect to decisions or recommendations made, actions taken or courses of conduct implemented by either the client or the client's customer as a result of or based upon the Test Results. In no event shall the Company be liable to the client with respect to the Test Results except for the Company's own willful misconduct or gross negligence nor shall the Company be liable for incidental or consequential damages or lost profits or revenues to the fullest extent such liability may be disclaimed by law, even if the Company has been advised of the possibility of such damages, lost profits or lost revenues. In no event shall the Company's liability with respect to the Test Results exceed the amount paid to the Company by the client therefor. Dates of Analysis: Asbestos PLM: 03-19-2020 Service SOPs: Asbestos PLM (EPA 40CFR App E to Sub E of Part 763 & EPA METHOD 600/R-93-116, SOP EM-AS-S-1267) NVLAP Lab Code 500031-0 EMLab ID: 2376136, Page 1 of 8Aerotech Laboratories, Inc Eurofins EMLab P&K 1501 West Knudsen Drive, Phoenix, AZ 85027 (800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: Healthy Home Environmental C/O: Mr. Jeff Parsons Re: 003010; 431 S 2nd W Date of Sampling: 03-13-2020 Date of Receipt: 03-16-2020 Date of Report: 03-19-2020 ASBESTOS PLM REPORT Total Samples Submitted:21 Total Samples Analyzed:21 Total Samples with Layer Asbestos Content > 1%:0 Location: RX-01-01, Vinyl Laundry Lab ID-Version‡: 11329753-1 Sample Layers Asbestos Content Brown Sheet Flooring ND Yellow Mastic ND Black Semi-Fibrous Material ND Composite Non-Asbestos Content: 2% Cellulose 2% Glass Fibers Sample Composite Homogeneity: Poor Location: RX-01-02, Vinyl Bathroom Lab ID-Version‡: 11329754-1 Sample Layers Asbestos Content Brown Sheet Flooring with Fibrous Backing ND Yellow Mastic ND Composite Non-Asbestos Content: 10% Cellulose < 1% Glass Fibers Sample Composite Homogeneity: Moderate Location: RX-02-01, Ceiling Tile Laundry Lab ID-Version‡: 11329755-1 Sample Layers Asbestos Content Brown Ceiling Tile with White Surface ND Composite Non-Asbestos Content: 90% Cellulose Sample Composite Homogeneity: Good Location: RX-02-02, Ceiling Bathroom Lab ID-Version‡: 11329756-1 Sample Layers Asbestos Content Brown Ceiling Tile with White Surface ND Composite Non-Asbestos Content: 90% Cellulose Sample Composite Homogeneity: Good EMLab ID: 2376136, Page 2 of 8Aerotech Laboratories, Inc The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by any agency of the federal government. Eurofins EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified. Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification. ‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x". Eurofins EMLab P&K 1501 West Knudsen Drive, Phoenix, AZ 85027 (800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: Healthy Home Environmental C/O: Mr. Jeff Parsons Re: 003010; 431 S 2nd W Date of Sampling: 03-13-2020 Date of Receipt: 03-16-2020 Date of Report: 03-19-2020 ASBESTOS PLM REPORT Location: RX-03-01, Drywall Ceiling Lab ID-Version‡: 11329757-1 Sample Layers Asbestos Content White Compound with Cream Paint ND White Compound with Cream Paint ND Sample Composite Homogeneity: Moderate EMLab ID: 2376136, Page 3 of 8Aerotech Laboratories, Inc The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by any agency of the federal government. Eurofins EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified. Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification. ‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x". Eurofins EMLab P&K 1501 West Knudsen Drive, Phoenix, AZ 85027 (800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: Healthy Home Environmental C/O: Mr. Jeff Parsons Re: 003010; 431 S 2nd W Date of Sampling: 03-13-2020 Date of Receipt: 03-16-2020 Date of Report: 03-19-2020 ASBESTOS PLM REPORT Location: RX-03-02, Drywall Ceiling Lab ID-Version‡: 11329758-1 Sample Layers Asbestos Content White Skim Coat with Multilayered Paint ND Light Gray Base Coat ND Sample Composite Homogeneity: Moderate Location: RX-03-03, Drywall Ceiling Lab ID-Version‡: 11329759-1 Sample Layers Asbestos Content White Compound with White Paint ND White Skim Coat with Multilayered Paint ND Light Gray Base Coat ND Brown Paper ND Composite Non-Asbestos Content: 2% Cellulose Sample Composite Homogeneity: Poor Location: RX-04-01, Drywall Lab ID-Version‡: 11329760-1 Sample Layers Asbestos Content White Skim Coat with Gray Paint ND Light Gray Base Coat ND Sample Composite Homogeneity: Moderate Location: RX-04-02, Drywall Lab ID-Version‡: 11329761-1 Sample Layers Asbestos Content White Compound with Gray Paint ND White Drywall with Brown Paper ND Composite Non-Asbestos Content: 10% Cellulose < 1% Glass Fibers Sample Composite Homogeneity: Moderate EMLab ID: 2376136, Page 4 of 8Aerotech Laboratories, Inc The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by any agency of the federal government. Eurofins EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified. Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification. ‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x". Eurofins EMLab P&K 1501 West Knudsen Drive, Phoenix, AZ 85027 (800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: Healthy Home Environmental C/O: Mr. Jeff Parsons Re: 003010; 431 S 2nd W Date of Sampling: 03-13-2020 Date of Receipt: 03-16-2020 Date of Report: 03-19-2020 ASBESTOS PLM REPORT Location: RX-04-03, Drywall Lab ID-Version‡: 11329762-1 Sample Layers Asbestos Content White Compound with Beige Paint ND White Compound with Light Gray Paint ND White Skim Coat with Multilayered Paint ND Off-White Base Coat ND Composite Non-Asbestos Content: < 1% Hair/Wool Sample Composite Homogeneity: Poor Location: RX-04-04, Drywall Lab ID-Version‡: 11329763-1 Sample Layers Asbestos Content White Compound ND Cream Tape ND White Joint Compound ND White Drywall with Brown Paper ND Composite Non-Asbestos Content: 15% Cellulose < 1% Glass Fibers Sample Composite Homogeneity: Poor Location: RX-04-05, Drywall Lab ID-Version‡: 11329764-1 Sample Layers Asbestos Content White Compound with White Paint ND Cream Tape ND White Joint Compound ND White Drywall with Brown Paper ND Composite Non-Asbestos Content: 15% Cellulose < 1% Glass Fibers Sample Composite Homogeneity: Poor EMLab ID: 2376136, Page 5 of 8Aerotech Laboratories, Inc The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by any agency of the federal government. Eurofins EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified. Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification. ‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x". Eurofins EMLab P&K 1501 West Knudsen Drive, Phoenix, AZ 85027 (800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: Healthy Home Environmental C/O: Mr. Jeff Parsons Re: 003010; 431 S 2nd W Date of Sampling: 03-13-2020 Date of Receipt: 03-16-2020 Date of Report: 03-19-2020 ASBESTOS PLM REPORT Location: RX-05-01, Upstairs Drywall Lab ID-Version‡: 11329765-1 Sample Layers Asbestos Content White Compound with Gray Paint ND Brown Paper with White Paint ND Brown Wallpaper ND Brown Fibrous Material ND Composite Non-Asbestos Content: 20% Cellulose Sample Composite Homogeneity: Poor EMLab ID: 2376136, Page 6 of 8Aerotech Laboratories, Inc The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by any agency of the federal government. Eurofins EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified. Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification. ‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x". Eurofins EMLab P&K 1501 West Knudsen Drive, Phoenix, AZ 85027 (800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: Healthy Home Environmental C/O: Mr. Jeff Parsons Re: 003010; 431 S 2nd W Date of Sampling: 03-13-2020 Date of Receipt: 03-16-2020 Date of Report: 03-19-2020 ASBESTOS PLM REPORT Location: RX-05-02, Upstairs Drywall Lab ID-Version‡: 11329766-1 Sample Layers Asbestos Content White Compound with Gray Paint ND White Skim Coat with White Paint ND Light Gray Base Coat ND Sample Composite Homogeneity: Poor Location: RX-05-03, Upstairs Drywall Lab ID-Version‡: 11329767-1 Sample Layers Asbestos Content White Wallpaper ND Brown Fibrous Material with White Paint ND Composite Non-Asbestos Content: 75% Cellulose Sample Composite Homogeneity: Moderate Location: RX-06-01, Kitchen Floor Lab ID-Version‡: 11329768-1 Sample Layers Asbestos Content Multicolored Sheet Flooring with Fibrous Backing ND Brown Mastic ND Tan Sheet Flooring ND Composite Non-Asbestos Content: 15% Cellulose Sample Composite Homogeneity: Poor Location: RX-06-02, Kitchen Floor Lab ID-Version‡: 11329769-1 Sample Layers Asbestos Content Multicolored Sheet Flooring with Fibrous Backing ND Brown Mastic ND Tan Sheet Flooring with Fibrous Backing ND Composite Non-Asbestos Content: 20% Cellulose Sample Composite Homogeneity: Poor EMLab ID: 2376136, Page 7 of 8Aerotech Laboratories, Inc The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by any agency of the federal government. Eurofins EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified. Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification. ‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x". Eurofins EMLab P&K 1501 West Knudsen Drive, Phoenix, AZ 85027 (800) 651-4802 Fax (623) 780-7695 www.emlab.com Client: Healthy Home Environmental C/O: Mr. Jeff Parsons Re: 003010; 431 S 2nd W Date of Sampling: 03-13-2020 Date of Receipt: 03-16-2020 Date of Report: 03-19-2020 ASBESTOS PLM REPORT Location: RX-06-03, Kitchen Floor Lab ID-Version‡: 11329770-1 Sample Layers Asbestos Content Multicolored Sheet Flooring with Fibrous Backing ND Brown Mastic ND Composite Non-Asbestos Content: 15% Cellulose Sample Composite Homogeneity: Moderate Location: RX-07-01, Bathroom Shower Adhesive Lab ID-Version‡: 11329771-1 Sample Layers Asbestos Content White Caulk ND White Tile ND White Cementitious Material ND Sample Composite Homogeneity: Poor Location: RX-07-02, Bathroom Shower Adhesive Lab ID-Version‡: 11329772-1 Sample Layers Asbestos Content Light Gray Tile ND White Cementitious Material ND Brown Paper ND Composite Non-Asbestos Content: 3% Cellulose Sample Composite Homogeneity: Poor Location: RX-07-03, Bathroom Shower Adhesive Lab ID-Version‡: 11329773-1 Sample Layers Asbestos Content Gray Tile ND Gray Grout ND Gray Thinset ND Sample Composite Homogeneity: Poor EMLab ID: 2376136, Page 8 of 8Aerotech Laboratories, Inc The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by any agency of the federal government. Eurofins EMLab P&K reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified. Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification. ‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x".