HomeMy WebLinkAboutCommercial Application ChecklistInspection Hotline – (208) 372.2344 www.rexburg.org Permit Technician – (208) 372.2341 Revised 10/2016
Building Safety Department City of Rexburg 35 North 1st East Rexburg, Idaho 83440
COMMERCIAL APPLICATION CHECKLIST
The following items should be completed before you submit your building permit application. *Reasonable accommodations will be made upon request.
Submit the Following Documents: ⧠ 3 sets of site plans drawn to scale (see Site Plan Checklist) ⧠ 3 sets of building plans (see box below to right) – stamped by a licensed professional. Include the following as applicable ⧠ Foundation Plan, Floor Joist Layout, Floor Plan, Roof Layout, Truss Details, Sectional Views, Front, Back, and Side
Elevations, Mechanical Layout, Stair Details, and any details required to illustrate special construction. ⧠ Electrical panel layout and calculations included with building plans. ⧠ Exterior Lighting Plan including photometric layout. ⧠ Structural Calculations (see box below) – stamped by a licensed Engineer ⧠ Energy Compliance Report: As per the 2015 IECC, a COMCheck is required (available online at www.energycodes.gov) ⧠ Digital Plans (PDF Format – can be submitted by USB, CD, or Dropbox) ⧠ **Copies of any Contractors’ State License if not on file already.
Complete the Following Forms ⧠ Site Plan Checklist ⧠ Permit Policies Acknowledgment signed ⧠ Property Line form signed ⧠ Building Permit Application signed by a registered General Contractor ⧠ Mechanical Permit Application signed by a registered Mechanical Contractor ⧠ Electrical Permit Application signed by a licensed Electrical Contractor ⧠ Plumbing Permit Application signed by a licensed Plumbing Contractor ⧠ Fire Alarm Permit Application (if applicable) signed by a registered professional ⧠ Fire Sprinkler Permit Application (if applicable) signed by a registered professional ⧠ Subcontractor list filled out ⧠ Affidavit of Legal Interest signed by owner ⧠ Notifications Distribution List ⧠ Business Use Summary Completed
Subdivisions: If you plan to build in a subdivision please check the Rexburg Development Code for any requirements such as property setbacks, architecture board approval, etc. This information is available at http://rexburg.org/pages/development-code.
Seismic Design Category – D (unless soil evaluation confirms category C) Ground Snow – 50 lbs. per sq. ft. Roof Snow Load – 35 lbs. per sq. ft. Wind Load – 90 MPH Frost Depth – 36”