HomeMy WebLinkAboutPRODUCT DATA - PIPE & FITTINGS BLAZEMASTER - 18-00176 - 220 S 2nd W - Arbor Cove - Bldg (C) #2 - 32 Units - New Dormitory HousingGeneral
Description
Tyco Fire & Building Products (TFBP)
BlazeMaster CPVC Pipe and Fittings
are designed exclusively for use in wet
pipe automatic fire sprinkler systems.
They are made from a specially devel-
oped thermoplastic compound com-
posed of post chlorinated polyvinyl
chloride (CPVC) resin and state of the
art additives. TFBP BlazeMaster
CPVC products are easier to install
than traditional steel pipe systems,
and at the same time, provide superior
heat resistance and strength as com-
pared to traditional CPVC and PVC
piping materials used in the plumbing
trade. Various adapters are available
to connect CPVC pipe to metallic pip-
ing. All female pipe thread adapters
have brass inserts for durability.
Grooved adapters connect directly to
grooved end valves and metallic pipe,
with flexible grooved end couplings.
WARNING
Tyco Fire & Building Products (TFBP)
BlazeMaster CPVC Pipe and Fittings
described herein mustbe installed and
maintained in compliance with this
document, as well as with the applica-
ble standards of the National Fire Pro-
tection Association, in addition to the
standards of any other authorities hav-
ing jurisdiction.Failure to do so may
impair the performance of these de-
vices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.
Technical
Data
Sizes
3/4" to 3"
Maximum Working Pressure
175 psi
Approvals
UL, FM, CUL, NSF, Dade County,
LPCB, MEA, and the City of Los Ange-
les. (Refer to IH-1900, Rev. 0, Janu-
ary 2005 “Installation Instruction &
Technical Handbook” for exact list-
ing/approval information.)
Manufacture Source
U.S.A.
Material
•Pipe: ASTM F442, SDR 13.5
•Fittings: ASTM F438 (Sch. 40) and
ASTM F439 (Sch. 80), ASTM F1970
Color
Orange
BlazeMaster ®
CPVC Fire Sprinkler Pipe & Fittings
Submittal Sheet
Page 1 of 6 TFP1915JANUARY, 2006
Technical Services:Tel: (800) 381-9312 / Fax: (800) 791-5500
BlazeMaster®is a registered trademark
of Noveon IP Holding Corp.
Installation
Tyco Fire and Building Products
(TFBP) BlazeMaster CPVC Pipe and
Fittings are to be installed in accord-
ance with IH-1900, Rev. 0, January
2005“Installation Instruction &Techni-
cal Handbook”.
Care and
Maintenance
The owner is responsible for the in-
spection, testing, and maintenance of
their fire protection system and de-
vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any
authority having jurisdiction. The in-
stallingcontractor orproductmanufac-
turer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service in accordance with
local requirements and/or national
codes.
NOTES
Before closing a fire protection system
control valve for inspection or mainte-
nance work on the fire protection sys-
tem that it controls, permission to shut
down the affected fire protection sys-
tem must first be obtained from the
proper authorities and all personnel
who may be affected by this action
must be notified.
After placing a fire protection system
in service, notify the proper authorities
and advise thoseresponsibleformoni-
toring proprietary and/or central sta-
tion alarms.
Page2of6 TFP1915
FIGURE 1 — PIPE DIMENSIONS
2"
1"
1-1/4"
1-1/2"
3/4"
2.375" 2.003"
1.315"
1.660"
1.900"
1.050"
1.101'
1.394"
1.598"
0.874"
SIZE
NOMINAL
2.200.84
0.67
0.44
1.08
1.41
0.26
0.42
0.54
0.18
3"
2-1/2"
3.500" 2.952"
2.875" 2.423"
4.831.87
3.261.26
10841260
1320
1339
1191
1213
5040
2835
2205
7875
1344720
15311215
O.D.
AVERAGE
lbs./ft.
WEIGHTAVERAGE
I.D.FILLED WEIGHT
WATER
lbs./ft.
FT. OF PIPE
PER LIFT
WEIGHT PER LIFT
lbs.
TFP1915 Page3of6
FIGURE 2 — FITTING DIMENSIONS (Part 1 of 4)
NOMINAL TAKE-OUTFITTINGNOMINAL SIZETYPE
PART
NUMBER (T/O)
T/O T/O
80004
80003
80002
TEE
T/O 80001
80000
2"
1-1/4"
1-1/2"
3/4"
1"
1-3/8"
1-1/16"
7/8"
0.90
0.51
0.26
5/8"
11/16"0.19
0.11
REDUCING TEE
1-1/2" x 1-1/2" x 1-1/4"
80266
80267
80274
80264
80275
80261
80262
80263
80260
2" x 2" x 3/4"
2" x 2" x 1"
2" x 2" x 1-1/2"
1-1/2" x 1-1/2" x 1"
7/8"
1-1/8"
1-1/16"
7/8"
9/16"
1-1/2" x 1-1/2" x 3/4"
1-1/4" x 1-1/4" x 3/4"
1-1/4" x 1-1/4" x 1"
1" x 1" x 3/4"
5/8"
9/16"
3/4"
5/8"
1-3/8"
1-3/8"
1-3/8"
7/8"
9/16"
1"
1-1/16"
0.66
0.78
0.74
0.45
0.38
7/8"5/8"
9/16"
3/4"
1"
7/8"
5/8" 13/16"
0.23
0.36
0.26
0.16
YXx YxZ XZ
80132 3/4" x 3/4" x 1" 3/4" 3/4" 5/8"0.14
80133 9/16"1" x 3/4" x 3/4" 9/16"0.143/4"
80134 1" x 3/4" x 1" 3/4" 11/16" 3/4"0.17
80135 1-1/4" x 1" x 3/4" 5/8"5/8"0.2115/16"
80136 1-1/4" x 1" x 1" 3/4" 3/4" 15/16"0.22
15/16"1-1/4" x 1" x 1-1/4"80137 15/16"0.267/8"
80138 1-1/4" x 1-1/4" x 1-1/2"1" 1" 1" 0.43
80140 1-1/2" x 1-1/4" x 3/4" 9/16" 9/16"1" 0.36
1-1/2" x 1-1/4" x 1"80141 9/16" 9/16"0.381-1/16"
80265 3/4" 1-3/8"0.61
T/O
T/O T/O
X Y
Z
7/8"
1-1/8"
1-1/16"
3/4"
WEIGHT
(lb.)
T/O
T/O
T/O T/O
CROSS & REDUCING CROSS
1-1/16"
80009
80010
80011
80013
80012
0.139/16"
1-5/16"
11/16"
15/16"
1.00
0.23
0.34
0.67
80006
80005
3"
2-1/2"
1-13/16"
1-9/16"
2.41
1.59
2-1/2" x 2-1/2" x 1-1/2"
80270
80269
80268
80272
80273
80271
3" x 3" x 1-1/2"
3" x 3" x 2"
3" x 3" x 2-1/2"
2-1/2" x 2-1/2" x 1-1/4"
1-13/16"
1-13/16"
1-13/16"
1-9/16"
1-9/16"
2-1/2" x 2-1/2" x 1" 1-9/16"
1-13/16"
1-13/16"
1-3/4"
1-9/16"
1-9/16"
1-9/16"
1-9/16"
2.28
2.44
2.25
1.48
1.46
1-9/16" 1-9/16"1.43
80276 2-1/2" x 2-1/2" x 2" 1-9/16" 1-9/16"1.50
1-13/16"
1-13/16"
1-13/16"
1-9/16"
2" x 2" x 1-1/4"
1-9/16"
80008
80014
1-13/16" 2.89
1.91
2"
1-1/4"
1-1/2"
3/4"
1"
3"
2-1/2"
80015 0.281" x 1" x 3/4" x 3/4" 7/8"
SCHD.
80
40
80
40
40
80
80
80
80
80
80
40
40
40
40
40
40
40
40
40
80
80
80
80
80
80
80
80
80
80
80
80
80
80
40
80
40
40
80
80
40
T/O
T/O
90° ELBOW &
1-1/16"
80029
80026
80025
80027
80028
2"
3/4"
1"
1-1/4"
1-1/2"
0.791-5/16"
5/8"
3/4"
7/8"0.21
0.14
0.40
0.09
Y
X
1-9/16"
80031
80030
3"
2-1/2"
1.821-13/16"
1.14
XxY
80032 1" x 3/4"0.16
X
11/16"
Y
13/16"
REDUCING ELBOW
80
40
80
40
40
80
80
40
Page4of6 TFP1915
FIGURE 2 — FITTING DIMENSIONS (Part 2 of 4)
0.2580078
T/O
80079 0.38
T/O
COUPLING &
T/O
45° ELBOW
80053
80054
80075
80076
80077
80050
80051
80052
0.311/2"
1/8"
3/4"
0.11
0.07
0.12
0.56
3/8"
3/8"
3/4"
0.08
0.11
0.20
1/8"
3/16"
3/16"
3/16"
80203
80206
80205
80204
80200
80201
80202
80207
80208
80209
T/O
REDUCER BUSHING
2" x 1-1/4"
2" x 1-1/2"
2" x 1"
1-1/2" x 3/4"
1-1/2" x 1-1/4"
1-1/4" x 3/4"
1-1/2" x 1"
2" x 3/4"
1-1/4" x 1"
1" x 3/4"
11/16"
9/16"
7/16"
5/8"
1/2"
13/16"
3/8"
5/16"
1/2"
7/16"
0.26
0.24
0.19
0.16
0.27
0.17
0.14
0.04
0.12
0.11
NOMINAL TAKE-OUTFITTINGNOMINAL SIZETYPE
PART
NUMBER (T/O)
2"
3/4"
1"
1-1/4"
1-1/2"
13/16"
80056
80055
3"
2-1/2"
1.191"
0.89
80
40
80
40
40
80
80
REDUCING COUPLING
2"
3/4"
1"
1-1/4"
1-1/2"
1/4"
80081
80080
3"
2-1/2"
0.913/16"
0.67
80
40
80
40
40
80
80
80220 0.081" x 3/4"1/8"40
80
40
80
40
40
80
80
80
80
80
80
80
80
80
80
80
80215 2-1/2" x 1" 15/16"0.42
80214 2-1/2" x 1-1/4" 13/16"0.45
80213 2-1/2" x 1-1/2" 11/16"0.46
80211 2-1/2" x 2"5/8"0.29
80210 3" x 2"3/4"0.72
80212 3" x 2-1/2"1/2"0.47
WEIGHT
(lb.)SCHD.
T/O
80104
80103
80102
CAP
80101
80100
2"
1-1/4"
1-1/2"
3/4"
1"
5/8"
11/16"
7/16"
0.31
0.20
0.10
5/16"
3/8"0.06
0.04
80106
80105
3"
2-1/2"
1"
7/8"
0.88
0.58
80
40
80
40
40
80
80
1-1/4" x 1-1/4" Groove 2-5/16"
80161
80162
T/O
1-1/2" x 1-1/2" Groove
2" x 2" Groove 2-5/16"
2-5/16"
80160
COUPLING ADAPTER
0.95
1.42
0.78
GROOVED
80163 2-1/2" x 2-1/2" Groove 2-5/16"2.28
80164 3" x 3" Groove 2-1/4"3.00
80169 2-1/2" x 76,1 mm Groove 2-5/16"2.28
40
80
80
80
80
80
PIPE
O.D.
T/O PIPE O.D.
1-1/4" (1.660")
2" (2.375")
1-1/2" (1.900")
2-1/2" (2.875")
3" (3.500")
76,1 mm (3.000")
TFP1915 Page5of6
3/4" x 3/4" NPT 13/16"
80145
80146
T/O
1' x 1" NPT
1-1/4" x 1-1/4" NPT 1-1/8"
7/8"
80142
0.63
1.03
0.41
80147 1-1/2" x 1-1/2" NPT 1-3/8"1.42
80148 2" x 2" NPT 1-11/16" 2.66
40
40
80
40
80
3/4" x 3/4" NPT 1-5/16"
80158 1' x 1" NPT 1-3/8"
80157
0.56
0.3340
40
T/O
80177L 3/4" x 1/2" NPT 0.16401/2"
80178 1" x 1/2" NPT 0.20409/16"
T/O
80258
80253
80256
2" x 1-1/2" x 1/2" NPT
2" x 2" x 1/2" NPT
1-1/4" x 1" x 1/2" NPT
1/2"
1/2"
7/16"
1-11/16"5/8"
1/2" 1-11/16"
9/16" 1-5/16"
0.56
0.62
0.30
80250 3/4" x 3/4" x 1/2" NPT 9/16" 9/16"1" 0.22
80251 11/16"1" x 1" x 1/2" NPT 11/16"0.291-3/16"
80249 1" x 1" x 1" NPT 15/16" 15/16" 1-9/16"0.73
80252 1-1/4" x 1-1/4" x 1/2" NPT 7/16"7/16"0.311-5/16"
80257 1-1/2" x 1-1/4" x 1/2" NPT 1/2" 11/16" 1-7/16"0.43
1/2"1-1/2" x 1-1/2" x 1/2" NPT80254 1/2"0.461-7/16"
80
80
40
40
40
40
40
80
80
T/OT/O
Z
XY
T/O
80175E 3/4" x 1/2" NPT 0.20
80176E 1" x 1/2" NPT 0.22
80
80
7/16"
7/16"
80175WL 3/4" x 1/2" NPT 0.16407/16"
80179 1" x 3/4" NPT 0.434013/16"
NOMINAL TAKE-OUTFITTINGNOMINAL SIZETYPE
PART
NUMBER (T/O)
FEMALE ADAPTER
MALE ADAPTER
WEIGHT
(lb.)SCHD.
ADAPTER (SPIGOT)
SPRINKLER HEAD
YXx YxZ XZ
ADAPTER TEE
SPRINKLER HEAD
ADAPTER
SPRINKLER HEAD
ADAPTER
SPRINKLER HEAD
80175W 3/4" x 1/2" NPT 0.19401/2"
80176W 1" x 1/2" NPT 0.18401/2"
T/O
T/O
80180 1" x 3/4" NPT 0.40407/8"
FIGURE 2 — FITTING DIMENSIONS (Part 3 of 4)
Limited
Warranty
Products manufactured by Tyco Fire &
Building Products (TFBP) are war-
ranted solely to the original Buyer for
ten (10) years against defects in mate-
rial and workmanship when paid for
and properly installed and maintained
under normal use and service. This
warranty will expire ten (10) years
from date of shipment by TFBP. No
warranty is given for products or com-
ponents manufactured by companies
not affiliated by ownership with TFBP
or for products and components which
havebeensubjecttomisuse,improper
installation,corrosion, or which have
not been installed, maintained, modi-
fied or repaired in accordance with ap-
plicable Standards of the National Fire
Protection Association, and/or the
standards of any other Authorities
Having Jurisdiction. Materials found
by TFBP to be defective shall be either
repaired or replaced, at TFBP’s sole
option. TFBP neither assumes, nor
authorizes any person to assume forit,
any other obligation in connection with
the sale of products or parts of prod-
ucts. TFBP shall not be responsible for
sprinkler system design errors or inac-
curate or incomplete information sup-
plied by Buyer or Buyer’s repre-
sentatives.
In no event shall TFBP be liable, in
contract, tort, strict liability or under
any other legal theory, for incidental,
indirect,specialorconsequentialdam-
ages, including but not limited to labor
charges, regardless of whether TFBP
was informed about the possibility of
such damages, and in no event shall
TFBP’s liability exceed an amount
equal to the sales price.
Theforegoingwarrantyismadeinlieu
of any and all other warranties, ex-
press or implied, including warranties
ofmerchantabilityandfitnessforapar-
ticular purpose.
This limited warranty sets forth the ex-
clusive remedy for claims based on
failure of or defect in products, materi-
als or components, whether the claim
is made in contract, tort, strict liability
or any other legal theory.
This warranty will apply to the full ex-
tent permitted by law. The invalidity, in
whole or part, of any portion of this
warranty will not affect the remainder.
Page6of6 TFP1915
TYCO FIRE & BUILDING PRODUCTS,451 North Cannon Avenue, Lansdale, Pennsylvania 19446
FIGURE 2 — FITTING DIMENSIONS (Part 4 of 4)
5/8"
5/8"
X Y, Z
1-5/16"
1-3/16"
Xx YxZ
80459 1" x 1/2" NPT x 1/2" NPT 0.48
80460 1" x 1/2" NPT x 1/2" NPT 0.46
40
40
BACK-TO-BACK TEE
T/O
T/OT/O
T/O
T/OT/O
T/O
Z
X
X
Z
W
Y
Y
5/8"
5/8"
X, Y Z, W
1-3/16"
1-5/16"
X x Y x Z x W
80462 1" x 1" x 1/2" NPT x 1/2" NPT 0.46
80463 1" x 1" x 1/2" NPT x 1/2" NPT 0.47
40
40
BACK-TO-BACK CROSS
NOMINAL TAKE-OUTFITTINGNOMINAL SIZETYPE
PART
NUMBER (T/O)
WEIGHT
(lb.)SCHD.
T/O
T/O
X
Y
ADAPTER 90° ELBOW
SPRINKLER HEAD
9/16"
3/4"
XY
1"
1-1/4"
XxY
80199 3/4" x 1/2" NPT 0.20
80198 1" x 1/2" NPT 0.26
40
40
1-1/16" 1-7/16"80196 1" x 3/4" NPT 0.2640