Loading...
HomeMy WebLinkAboutPRODUCT DATA - PIPE & FITTINGS VICTAULIC FLEX COUPLING - 18-00176 - 220 S 2nd W - Arbor Cove - Bldg (C) #2 - 32 Units - New Dormitory HousingStyle 77 couplings are designed with cross-ribbed construction to provide a strong component for pressure piping systems. Sizes ¾ – 12"/20 – 300 mm are two-piece housings. For 14 – 24"/350 – 600 mm sizes, Victaulic offers the Advanced Groove System (AGS) line of products. Request publication 20.03 for information on the flexible Style W77 AGS coupling. All sizes are provided with plated bolts and nuts. Galvanized and stainless steel housings are also available. Independent testing has shown the Style 77 coupling to be an effective stress relief and vibration attenuation device providing performance superior to braided steel and elastomeric arch-type connectors when used in close proximity to the source of vibration. Refer to 26.04 for vibration information. Independent testing has shown that Victaulic Style 77 flexible couplings provide exceptional functionality during and after earthquake conditions. Refer to 26.12 for further information. Housing: Ductile iron conforming to ASTM A-536, grade 65-45-12. Ductile iron conforming to ASTM A-395, grade 65-45-15, is available upon special request. Housing Coating: Orange enamel. • Optional: Hot dipped galvanized and others. Coupling Gasket: (specify choice*)† • Grade “E” EPDM (All other sizes) EPDM (Green color code). Temperature range –30°F to +230°F/–34°C to +110°C. Recommended for hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/NSF 61 for cold +86°F/+30°C and hot +180°F/+82°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES. • Grade “T” nitrile Nitrile (Orange color code). Temperature range –20°F to +180°F/–29°C to +82°C. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not recommended for hot water services over +150°F/+66°C or for hot dry air over +140°F/+60°C. * Services listed are General Service Recommendations only. It should be noted that there are services for which these gaskets are not recommended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service recommendations and for a listing of services which are not recommended. Bolts/Nuts: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of ASTM A-449 and physical requirements of ASTM A-183. • Optional: Type 316 stainless steel, Grade B-8M, Class 2. † Supplemental lubricant is recommended for services installed at or continuously operating below 0°F/–18°C. MATERIAL SPECIFICATIONS 06.04_1 Standard Flexible Coupling STYLE 77 06.04IPS CARBON STEEL PIPE – GROOVED COUPLINGS JOB/OWNER CONTRACTOR ENGINEER System No. __________________________ Submitted By ________________________ Spec Sect ____________ Para __________ Location ____________________________ Date ________________________________ Approved ___________________________ Date ________________________________ www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_H Exaggerated for clarity SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS DIMENSIONS Size Max. Work Pressure * Max. End Load * Allow. Pipe End Sep. † Deflect. Fr. CL† Bolt/Nut@ No - Size Dimensions – Inches/mm Approx. Wgt. Each Nominal Size Inches mm Actual Outside Diameter Inches mm psi kPa Lbs. N Inches mm Per Cplg. Deg. Pipe In./Ft. mm/m Inches mm X Y Z Lbs. kg ¾ 1.050 1,000 865 0 – 0.06 3˚ – 24'0.72 2 – 3⁄8 x 2 2.13 4.00 1.75 1.1 20 26.7 6900 3850 0 – 1.6 60 54 102 44 0.5 1 1.315 1,000 1,360 0 – 0.06 2˚ – 43'0.57 2 – 3⁄8 x 2 2.38 4.12 1.75 1.2 25 33.4 6900 6050 0 – 1.6 48 61 105 44 0.5 1 ¼ 1.660 1,000 2,160 0 – 0.06 2˚ – 10'0.45 2 – ½ x 2 ½ 2.65 5.00 1.88 2.0 32 42.2 6900 9610 0 – 1.6 38 67 127 48 0.9 1 ½ 1.900 1,000 2,835 0 – 0.06 1˚ – 56'0.40 2 – ½ x 2 ½ 3.13 5.38 1.88 2.1 40 48.3 6900 12615 0 – 1.6 33 79 137 48 1.0 2 2.375 1,000 4,430 0 – 0.06 1˚ – 31'0.32 2 – ½ x 2 ½ 3.63 5.88 1.88 2.6 50 60.3 6900 19715 0 – 1.6 26 92 149 48 1.2 2 ½ 2.875 1,000 6,490 0 – 0.06 1˚ – 15'0.26 2 – ½ x 2 ¾ 4.25 6.50 1.88 3.1 65 73.0 6900 28880 0 – 1.6 22 108 165 48 1.4 76.1 mm 3.000 1,000 7,070 0 – 0.06 1˚ – 12'0.26 2 – ½ x 2 ¾ 4.38 6.63 1.88 3.2 76.1 6900 31460 0 – 1.6 22 111 168 48 1.5 3 3.500 1,000 9,620 0 – 0.06 1˚ – 2'0.22 2 – ½ x 2 ¾ 5.00 7.13 1.88 3.7 80 88.9 6900 46810 0 – 1.6 18 127 181 48 1.7 3 ½ 4.000 1,000 12,565 0 – 0.06 0˚ – 54'0.19 2 – 5⁄8 x 3 ¼ 5.63 8.25 1.88 5.6 90 101.6 6900 55915 0 – 1.6 16 143 210 48 2.5 4 4.500 1,000 15,900 0 – 0.13 1˚ – 36'0.34 2 – 5⁄8 x 3 ¼ 6.13 8.88 2.13 6.7 100 114.3 6900 70755 0 – 3.2 28 156 226 54 3.0 108.0 mm 4.250 1,000 14,180 0 – 0.13 1˚ – 41'0.35 2 – 16 x 82.5 6.00 8.63 2.13 11.0 108.0 6900 63100 0 – 3.2 29 152 219 54 5.0 5 5.563 1,000 24,300 0 – 0.13 1˚ – 18'0.27 2 – ¾ x 4 ¼ 7.75 10.65 2.13 10.6 125 141.3 6900 108135 0 – 3.2 23 197 270 54 4.8 133.0 mm 5.250 1,000 21,635 0 – 0.13 1˚ – 21'0.28 2 – 20 x 108 7.63 10.38 2.13 10.0 133.0 6900 96275 0 – 3.2 24 194 264 54 4.5 139.7 mm 5.500 1,000 23,745 0 – 0.13 1˚ – 18'0.28 2 – 20 x 108 8.63 10.65 2.13 10.0 139.7 6900 105665 0 – 3.2 24 219 270 54 4.5 6 6.625 1,000 34,470 0 – 0.13 1˚ – 5'0.23 2 – ¾ x 4 ¼ 8.63 11.88 2.13 12.0 150 168.3 6900 153390 0 – 3.2 18 219 302 54 5.4 X ZY ¾ – 12" SIZES Y X Z Z X Y 14 – 22" SIZES 24" SIZES Table continued on page 3. See notes on page 3. 06.04_2 Standard Flexible Coupling STYLE 77 06.04IPS CARBON STEEL PIPE – GROOVED COUPLINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_H DIMENSIONS Size Max. Work Pressure * Max. End Load * Allow. Pipe End Sep. † Deflect. Fr. CL† Bolt/Nut@ No - Size Dimensions – Inches/mm Approx. Wgt. Each Nominal Size Inches mm Actual Outside Diameter Inches mm psi kPa Lbs. N Inches mm Per Cplg. Deg. Pipe In./Ft. mm/m Inches mm X Y Z Lbs. kg 159.0 mm 6.250 1,000 30,665 0 – 0.13 1˚ – 9'0.24 2 – 20 x 108 8.63 11.50 2.13 13.2 159.0 6900 136460 0 – 3.2 20 219 292 54 6.0 165.1 mm 6.500 1,000 33,185 0 – 0.13 1˚ – 6'0.23 2 – ¾ x 4 ¼ 8.88 11.63 2.13 13.2 165.1 6900 147660 0 – 3.2 19 226 295 54 6.0 8 § 8.625 800 46,740 0 – 0.13 0˚ – 50'0.18 2 – 7⁄8 x 5 11.00 14.75 2.50 20.8 200 219.1 5500 207995 0 – 3.2 14 279 375 63 9.4 10 § 10.750 800 73,280 0 – 0.13 0˚ – 40'0.14 2 – 1 x 6 13.63 17.13 2.63 31.1 250 273.0 5500 326100 0 – 3.2 12 346 435 67 14.1 12 § 12.750 800 102,000 0 – 0.13 0˚ – 34'0.12 2 – 1 x 6 ½ 15.63 19.25 2.63 27.8 300 323.9 5500 453900 0 – 3.2 9 397 489 67 12.6 14 ‡ 14.000 300 46,180 0 – 0.13 0° – 31'0.11 4 – 1 x 3 ½ 16.63 19.88 2.88 35.6 350 355.6 2065 205500 0 – 3.2 9 422 505 73 16.1 15 ‡ 15.000 300 53,000 0 – 0.13 0° – 29'0.10 4 – 1 x 5 ½ 17.88 21.63 3.00 48.8 375 381.0 2065 235850 0 – 3.2 9 454 549 76 22.1 16 ‡ 16.000 300 60,320 0 – 0.13 0° – 27'0.10 4 – 1 x 3 ½ 19.00 22.13 3.00 51.1 400 406.4 2065 268425 0 – 3.2 9 482 562 76 23.2 18 ‡ 18.000 300 76,340 0 – 0.13 0° – 24'0.08 4 – 1 x 3 ½ 21.38 24.50 3.13 64.4 450 457.2 2065 339710 0 – 3.2 7 543 622 80 29.2 20 ‡ 20.000 300 94,000 0 – 0.13 0° – 22'0.08 4 – 1 1⁄8 x 4 23.63 27.25 3.13 91.2 500 508.0 2065 418300 0 – 3.2 7 600 692 80 41.4 22 ‡ 22.000 300 114,000 0 – 0.13 0° – 19'0.07 4 – 1 1⁄8 x 4 25.75 29.50 3.13 92.0 550 559.0 2065 507300 0 – 3.2 6 654 749 80 41.7 24 ‡ 24.000 250 113,000 0 – 0.13 0° – 18' 0.07 6 – 1 1⁄8 x 4 27.75 31.25 3.13 94.0 600 609.6 1725 502850 0 – 3.2 6 704 794 80 42.6 § Couplings 8, 10, 12"/200, 250, 300 mm sizes available to JIS standards. Refer to Section 06.17 for details. * Working Pressure and End Load are total, from all internal and external loads, based on standard weight (ANSI) steel pipe, standard roll or cut grooved in accordance with Victaulic specifications. Contact Victaulic for performance on other pipe. WARNING: FOR ONE TIME FIELD TEST ONLY, the Maximum Joint Working Pressure may be increased to 1½ times the figures shown. † Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for standard roll grooved pipe. Figures for standard cut grooved pipe may be doubled. These figures are maximums; for design and installation purposes these figures should be reduced by: 50% for ¾ – 3 ½ "/20 – 90 mm; 25% for 4"/100 mm and larger. @ Number of bolts required equals number of housing segments. Metric thread size bolts are available (color coded gold) for all coupling sizes upon request. Contact Victaulic for details. ‡ For cut groove systems only. For 14 – 24"/350 – 600 mm Roll Groove systems Victaulic offers the Advanced Groove System (AGS) line of products. Request publication 20.03 for information on the Style W77 flexible AGS coupling. X ZY ¾ – 12" SIZES Y X Z Z X Y 14 – 22" SIZES 24" SIZES 06.04_3 Standard Flexible Coupling STYLE 77 06.04IPS CARBON STEEL PIPE – GROOVED COUPLINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_H WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. NOTE WCAS-6ENLL6 06.04 Standard Flexible Coupling STYLE 77 IPS CARBON STEEL PIPE – GROOVED COUPLINGS For complete contact information, visit www.victaulic.com 06.04 1469 REV H UPDATED 10/2006 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. 06.04