Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
PRODUCT DATA - PIPE & FITTINGS VICTAULIC GROOVED FITTINGS - 18-00176 - 220 S 2nd W - Arbor Cove - Bldg (C) #2 - 32 Units - New Dormitory Housing
Victaulic offers a broad line of fittings in sizes through 48”/1200 mm in a variety of straight and reducing styles. Most standard fittings are cast of durable ductile iron to precise tolerances. Victaulic standard fittings pressure ratings conform to the ratings of Victaulic Style 77 couplings. All fittings are supplied with grooves or shoulders to permit fast installation without field prepara- tion. The grooved design permits flexibility for easy alignment. These fittings are not intended for use with Victaulic couplings for plain end pipe (refer to Section 14.04 for fittings available for plain end applications). Fittings are provided in various materials including ductile iron, steel or segmentally welded steel depending on styles and size. Fittings are painted orange enamel with a galvanized finish avail- able as an option, contact Victaulic for details. Victaulic fittings are designed specifically for use in grooved piping systems. Fittings are provided grooved or with shoulders conforming to standard steel pipe outside diameters. When connecting wafer or lug-type butterfly valves directly to Victaulic fittings with 741 or 743 Vic-Flange® adapt- ers, check disc clearance dimensions with I.D. dimension of fitting. Advanced Groove System – For 14 – 24"/350 – 600 mm piping systems, Victaulic now offers the Advanced Groove System (AGS). Refer to Section 20.05 for AGS fitting details. Stainless Steel – Grooved end fittings are available in Schedule 10 Type 316 stainless steel (Schedule 5, 40 and Type 304 available as an option) in various sizes. Fitting center-to-end dimensions will vary depending upon type and schedule. Refer to Section 17.04 and 17.16 for details. Aluminum – Grooved end fittings are available in aluminum alloy 356 T6, in sizes from 1 – 8"/25 – 200 mm. Refer to Section 21.03 or contact Victaulic for details. AGS – ADVANCED GROOVE SYSTEM ALTERNATE STYLES Extra Heavy EndSeal ® “ES” Fittings – EndSeal fittings are available in 2 – 12"/50 – 300 mm for use with “ES” grooved pipe and HP-70ES EndSeal couplings. “ES” fittings are painted black for easy identification. EndSeal (and standard) fittings may be easily internally coated (by others) for severe service requirements. Always specify “ES EndSeal fittings” when ordering. See Section 07.03 for information on EndSeal fittings. Fittings Machined for Rubber or Urethane Lining (MRL) – For severe abrasive services, Victaulic fittings may be rubber or urethane lined (by others). Lining may be inside diameter/end (abrasion resistance) or wrap-around (corrosion and/or abrasion) machined. Refer to Section 25.03 or contact Victaulic for specific details. 07.01_1 Grooved End Fittings NO. 20 TEE 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS JOB/OWNER CONTRACTOR ENGINEER System No. __________________________ Submitted By ________________________ Spec Sect ____________ Para __________ Location ____________________________ Date ________________________________ Approved ___________________________ Date ________________________________ www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 10 ELBOW FLOW DATA (Frictional Resistance) The chart expresses the frictional resistance of various Victaulic fittings as equivalent feet of straight pipe. Fittings not listed can be estimated from the data given, for example, a 22½ ° elbow is approximately one-half the resistance of a 45° elbow. Values of mid-sizes can be interpolated. Size Dimension – Feet/meters Nominal Size In./mm Actual Outside Dia. In./mm Elbows Tees 90° Elbows 45° Elbows Branch Run No. 10 Std. Radius No. 100 1½ D Long Radius No. 11 Std. Radius No. 110 1½ D Long Radius 11.3151.7—0.8 —4.2 1.7 25 33.7 0.5 0.2 1.3 0.5 2 2.375 3.5 2.5 1.8 1.1 8.5 3.5 50 60.3 1.1 0.8 0.5 0.3 2.6 1.1 76.1 mm 3.000 4.3 —2.1 —10.8 4.3 76.1 1.3 0.7 3.3 1.3 3 3.500 5.0 3.8 2.6 1.6 13.0 5.0 80 88.9 1.5 1.2 0.8 0.5 4.0 1.5 108.0 mm 4.250 6.4 —3.2 —15.3 6.4 108.0 2.0 0.9 4.7 2.0 4 4.500 6.8 5.0 3.4 2.1 16.0 6.8 100 114.3 2.1 1.5 1.0 0.6 4.9 2.1 133.0 mm 5.250 8.1 —4.1 —20.0 8.1 133.0 2.5 1.2 6.2 2.5 139.7 mm 5.500 8.5 —4.2 —21.0 8.5 139.7 2.6 1.3 6.4 2.6 55.5638.5—4.2 —21.0 8.5 125 141.3 2.6 1.3 6.4 2.6 159.0 mm 6.250 9.4 —4.9 —25.0 9.6 159.0 2.9 1.5 7.6 2.9 165.1 mm 6.500 9.6 s—5.0 —25.0 10.0 165.1 2.9 1.5 7.6 3.0 66.62510.07.5 5.03.025.010.0 150 168.3 3.0 2.3 1.5 0.9 7.6 3.0 88.62513.09.86.54.033.013.0 200 219.1 4.0 3.0 2.0 1.2 10.1 4.0 10 10.750 17.0 12.0 8.3 5.0 41.0 17.0 250 273.0 5.2 3.7 2.5 1.5 12.5 5.2 12 12.750 20.0 14.5 10.0 6.0 50.0 20.0 300 323.9 6.1 4.4 3.0 1.8 15.2 6.1 14 14.000 #15.8 #11.0 70.0 23.0 350 355.6 4.8 3.4 21.3 7.0 16 16.000 #18.0 #13.0 80.0 27.0 400 406.4 5.5 4.0 24.4 8.2 18 18.000 #20.0 #14.0 90.0 30.0 450 457.0 6.1 4.3 27.4 9.1 20 20.000 #22.5 #16.0 100.0 33.0 800 508.0 6.9 4.9 30.5 10.1 24 24.000 #27.0 #19.0 120.0 40.0 600 610.0 8.2 5.8 36.6 12.2 26 26.000 #28.0 #20.5 130.0 43.0 650 660.4 8.5 6.3 39.6 13.1 30 30.000 #34.0 #24.0 150.0 50.0 750 762.0 10.4 7.3 45.7 15.2 36 36.000 #40.5 #28.5 180.0 60.0 900 914.0 12.3 8.7 54.9 18.3 42 42.000 #47.0 #33.0 210.0 70.0 1050 1067.0 14.3 10.1 64.0 21.3 07.01_2 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW MATERIAL SPECIFICATIONS Fitting: Ductile iron conforming to ASTM A-536, grade 65-45-12. Ductile iron conforming to ASTM A-395, grade 65-45-15, is available upon special request. • Or: Segmentally welded steel as shown under nipples Nipples: (adapter, swaged & hose) • ¾ – 4"/20 – 100 mm: Carbon steel, Schedule 40, conforming to ASTM A-53, Type F • 5 – 6"/125 – 150 mm: Carbon steel, Schedule 40, conforming to ASTM A-53, Type E or S, Gr. B • 8 – 12"/200 – 300 mm: Carbon steel, Schedule 30 or 40, conforming to ASTM A-53, Type E or S, Gr. B Flanged Adapter Nipples: (Nipple – see above) • Class 125 Flange: Cast iron conforming to ANSI B-16.1 • Class 150 Flange: Carbon steel conforming to ANSI B-16.5, raised or flat face • Class 300 Flange: Carbon steel conforming to ANSI B-16.5, raised or flat face Fitting Coatings: Orange enamel • Optional: Hot dip galvanized and others. Some fittings supplied electroplated as standard – see product specifications. Flanged Adapter Nipple Coating: None (Unfinished) • Optional: Orange enamel, hot dip galvanized and others. 07.01_3 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Elbows NO. 10 90º Elbow NO. 11 45º Elbow NO. 12 22½º Elbow NO. 13 11¼º Elbow NO. 100 90º Long Radius NO. 110 45º Long Radius (Ductile Iron *) DIMENSIONS C to E C to E NO. 10 C to E NO. 11 C to E E to E NO. 12 C to E NO. 13 C to E NO. 100 C to E NO. 110 Size No. 10 90º Elbow No. 11 45º Elbow No. 12 22½° Elbow (sw) No. 13 11¼° Elbow (sw) No. 100† 90° Long Radius Elbow (S) No. 110† 45° Long Radius Elbow (S) Nominal Size Inches mm Actual Outside Dia. Inches mm C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg ¾ 1.050 2.25 0.5 1.50 0.5 1.63 sw —1.38 sw —————20 26.9 57 0.2 38 0.2 41 35 1 1.315 2.25 0.6 1.75 0.6 3.25 @ 0.6 1.38 sw 0.3 ————25 33.7 57 0.3 44 0.3 83 0.3 35 0.1 1 ¼ 1.660 2.75 1.0 1.75 0.9 1.75 0.8 1.38 sw 0.5 ————32 42.4 70 0.5 44 0.4 44 0.4 35 0.2 1 ½ 1.900 2.75 1.2 1.75 0.9 1.75 0.8 1.38 sw 0.5 ————40 48.3 70 0.5 44 0.4 44 0.4 35 0.2 2 2.375 3.25 1.8 2.00 1.3 3.75 @ 1.4 1.38 1.0 4.38 2.5 2.75 1.8 50 60.3 83 0.8 51 0.6 95 0.6 35 0.5 111 1.1 70 0.8 2 ½ 2.875 3.75 3.2 2.25 2.2 4.00 @ 2.3 1.50 1.1 5.00 4.1 3.00 2.8 65 73.0 95 1.5 57 1.0 102 1.0 38 0.5 127 1.9 76 1.3 76.1 mm 3.000 3.75 3.7 2.25 3.4 ————————76.1 95 1.7 57 1.5 3 3.500 4.25 4.5 2.50 3.1 4.50 @ 3.1 1.50 2.1 5.88 6.0 3.38 4.9 80 88.9 108 2.0 64 1.4 114 1.4 38 1.0 149 2.7 86 2.2 3 ½ 4.000 4.50 5.6 2.75 4.3 2.50 sw 4.0 1.75 sw 2.7 ————90 101.6 114 2.5 70 2.0 64 1.8 44 1.2 4 4.500 5.00 7.1 3.00 5.6 2.88 5.6 1.75 3.6 7.50 12.3 4.00 7.3 100 114.3 127 3.2 76 2.5 73 2.5 44 1.6 191 5.6 102 3.3 108.0 mm 4.250 5.00 11.0 3.00 5.6 ————————108.0 127 5.0 76 2.5 4 ½ 5.000 5.25 sw 10.0 3.13 sw 6.0 3.50 6.6 1.88 sw 4.2 ————120 127.0 133 4.5 79 2.7 89 3.0 48 1.9 5 5.563 5.50 11.7 3.25 8.3 2.88 sw 7.8 2.00 sw 5.0 +18.2 +14.8 125 141.3 140 5.3 83 3.8 73 3.5 51 2.2 8.3 6.7 133.0 mm 5.250 5.50 11.7 3.25 8.3 ————————133.0 140 5.3 83 3.8 139.7 mm 5.500 5.50 11.7 3.25 8.3 ————————139.7 140 5.3 83 3.8 6 6.625 6.50 17.2 3.50 10.8 6.25 @ 12.2 2.00 7.0 10.75 30.4 5.50 17.4 150 168.3 165 7.8 89 4.9 159 5.5 51 3.2 273 13.8 140 7.9 159.0 mm 6.250 6.50 18.6 3.50 10.8 ————————159.0 165 8.4 89 4.9 165.1 mm 6.500 6.50 15.5 3.50 9.8 3.13 11.4 2.00 7.4 10.75 29.0 5.50 19.0 165.1 165 7.0 89 4.4 79 5.2 51 3.4 273 13.2 140 8.6 07.01_4 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Cto E C to E NO. 10 C to E NO. 11 C to E E to E NO. 12 C to E NO. 13 C to E NO. 100 C to E NO. 110 Size No. 10 90º Elbow No. 11 45º Elbow No. 12 22½° Elbow (sw) No. 13 11¼° Elbow (sw) No. 100† 90° Long Radius Elbow (S) No. 110† 45° Long Radius Elbow (S) Nominal Size Inches mm Actual Outside Dia. Inches mm C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg C to E Inches mm Approx. Wgt. Each Lbs. kg 8 8.625 7.75 29.9 4.25 20.4 7.75 @ 20.0 2.00 10.1 14.25 66.0 7.25 36.0 200 219.1 197 13.6 108 9.3 197 9.1 51 4.6 362 30.0 184 16.3 10 10.750 9.00 63.3 4.75 37.5 4.38 sw 30.0 2.13 sw 11.8 15.00 107.0 6.25 57.0 250 273.0 229 28.7 121 17.0 111 13.6 54 5.3 381 48.5 159 25.9 12 12.750 10.00 74.0 5.25 66.7 4.88 sw 40.0 2.25 sw 29.3 18.00 156.0 7.50 90.0 300 323.9 254 33.6 133 30.3 124 18.1 57 13.3 457 70.8 191 40.8 14 # 14.000 14.00 136.0 5.75 65.0 5.00 sw 46.0 3.50 sw 32.0 21.00 s 164.0 8.75 s 82.0 350 355.6 355.6 61.7 146 29.5 127 20.9 89 14.5 533 74.4 222 37.2 377.0 mm †14.843 14.84 149.3 6.15 82.0 ————————377.0 376.9 67.7 156.2 37.2 16 # 16.000 16.00 171.0 6.63 88.0 5.00 sw 58.0 4.00 sw 42.0 24.00 s 210.0 10.00 s 100.0 400 406.4 406.4 77.6 168 39.9 127 26.3 102 19.1 610 95.3 254 45.4 426.0 mm †16.772 16.77 198.6 6.95 101.3 ————————426.0 426.0 90.1 176.5 45.9 18 # 18.000 18.00 228.0 7.46 108.0 5.50 sw 65.0 4.50 sw 53.2 27.00 s 273.0 11.25 s 135.0 450 457.0 457.2 103.4 189 50.0 140 29.5 114 24.1 686 123.8 286 61.2 480.0 mm †18.898 18.90 291.0 7.83 141.7 ————————480.0 480.0 132.0 198.8 64.3 20 # 20.000 20.00 298.0 8.28 138.0 6.00 sw 78.6 5.00 sw 65.0 30.00 s 343.0 12.50 s 174.0 500 508.0 508.0 135.2 210 62.6 152 36.0 127 29.5 762 155.6 318 78.9 530.0 mm †20.866 20.87 355.0 8.64 179.0 ————————530.0 530.0 161.0 219.4 81.2 24 # 24.000 24.00 438.0 9.94 221.0 7.00 sw 140.0 6.00 sw 60.0 36.00 s 516.0 15.00 s 251.0 550 610.0 609.6 198.7 252 100.2 178 63.5 152 27.2 914 234.1 381 113.9 630.0 mm †24.803 24.80 545.0 10.27 255.2 ————————630.0 630.0 247.2 261.0 115.7 14 – 24 350 – 600 TM For AGS fitting information, see publication 20.05 @ Gooseneck design, end-to-end dimension * (sw) Segmentally welded steel # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. † Chinese standard sizes 07.01_5 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Long Radius Elbow 3D With added wall thickness at bend for abrasive services. NO. 100-3D 90º Long Radius Elbow 3D NO. 110-3D 45º Long Radius Elbow 3D (Ductile Iron) C to E NO. 100-3D C to E NO. 110-3D Size Wall Thickness – Inches/mm No. 100-3D 90º Long Radius Elbow No. 110-3D 45º Long Radius Elbow Nominal Size Inches mm Actual Outside Diameter Inches mm In Non-critical Area At Back Wear Area Extra C to E Inches mm Approx. Weight Each Lbs. kg C to E Inches mm Approx. Weight Each Lbs. kg 2 2.375 0.184 0.309 0.125 10.00 5.0 6.50 4.7 50 60.3 4.67 7.85 3.18 254 2.3 165 2.1 3 3.500 0.246 0.371 0.125 13.00 16.0 7.75 10.4 80 88.9 6.25 9.42 3.18 330 7.3 197 4.7 4 4.500 0.267 0.455 0.188 16.00 25.5 9.00 17.2 100 114.3 6.78 11.56 4.78 406 11.6 229 7.8 6 6.625 0.310 0.560 0.250 24.00 70.0 13.50 45.0 150 168.3 7.87 14.22 6.35 610 31.8 343 20.4 Reducing Base Support Elbow NO. R-10G Grv. × Grv. NO. R-10F Grv. × Flange (Ductile Iron) C to E H B Dia. NO. R-10G C to E H B Dia. NO. R-10F Size No. R-10 Reducing Base Support Elbow Approx. Weight Each Nominal Size Inches mm C to E Inches mm H Inches mm B Diameter Inches mm Grv. × Grv. Lbs. kg Grv. × Flange Lbs. kg 6 × 49.00 1.25 1.50 19.0 33.0 150 100 229 32 38 8.6 15.0 5 9.00 1.50 1.50 23.0 38.0 125 229 38 38 10.4 17.2 8 × 6 10.50 2.13 1.50 33.0 52.0 200 150 267 54 38 15.0 23.6 10 × 8 12.00 2.40 1.50 61.0 88.0 250 200 305 61 38 27.7 39.9 07.01_6 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Adapter Elbow NO. 18 90º Adapter Elbow NO. 19 45º Adapter Elbow (Ductile Iron)C toTE C to GE NO. 18 C toGE C to TE NO. 19 Size No. 18 90° Adapter Elbow @ No. 19 45° Adapter Elbow @ Nominal Size Inches mm Actual Outside Diameter Inches mm C to GE Inches mm C to TE Inches mm Approx. Weight Each Lbs. kg C to GE Inches mm C to TE Inches mm Approx. Weight Each Lbs. kg ¾ 1.050 2.25 2.25 0.5 1.50 1.50 0.5 20 26.9 57 57 0.2 38 38 0.2 1 1.315 2.25 2.25 0.5 1.75 1.75 0.6 25 33.7 57 57 0.2 44 44 0.3 1 ¼ 1.660 2.75 2.75 0.9 1.75 1.75 0.6 32 42.4 70 70 0.4 44 44 0.3 1 ½ 1.900 2.75 2.75 1.1 1.75 1.75 0.9 40 48.3 70 70 0.5 44 44 0.4 2 2.375 3.25 4.25 2.5 2.00 3.00 1.9 50 60.3 83 108 1.1 51 76 0.9 2 ½ 2.875 3.75 3.75 3.0 2.25 2.25 2.3 65 73.0 95 95 1.4 57 57 1.0 3 3.500 4.25 6.00 5.8 2.50 4.25 5.0 80 88.9 108 152 2.6 64 108 2.3 3 ½ 4.000 4.50 6.25 8.0 5.25 5.25 8.8 90 101.6 114 159 3.6 133 133 4.0 4 4.500 5.00 7.25 12.0 3.00 5.25 8.8 100 114.3 127 184 5.4 76 133 4.0 6 6.625 6.50 6.50 17.6 3.50 3.50 12.7 150 168.3 165 165 8.0 89 89 5.8 @ Available with British Standard Pipe Threads, specify “BSP” clearly on order. + Contact Victaulic for details. 07.01_7 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW C to E CtoE NO. 20 C to E NO 35 C to LE C toSE NO. 33 C to GE C to TE NO. 29M Size No. 20 Tee No. 35 Cross (sw) No. 33 True Wye (sw) No. 29M Tee with Threaded Branch Nominal Size Inches mm Actual Outside Dia. Inches mm C to E Inches mm Approx. Weight Each Lbs. kg C to E Inches mm Approx. Weight Each Lbs. kg C to LE Inches mm C to SE Inches mm Approx. Weight Each Lbs. kg C to GE Inches mm C to TE Inches mm Approx. Weight Each Lbs. kg ¾ 1.050 2.25 0.6 2.25 0.9 ———2.25 2.25 0.6 20 26.9 57 0.3 57 0.4 57 57 0.3 1 1.315 2.25 1.0 2.25 1.3 2.25 2.25 1.1 2.25 2.25 1.0 25 33.7 57 0.5 57 0.6 57 57 0.5 57 57 0.5 1 ¼ 1.660 2.75 1.5 2.75 2.1 2.75 2.50 1.5 2.75 2.75 1.5 3242.4700.7701.070640.770700.7 1 ½ 1.900 2.75 2.0 2.75 2.5 2.75 2.75 1.8 2.75 2.75 2.0 40 48.3 70 0.9 70 1.1 70 70 0.8 70 70 0.9 2 2.375 3.25 3.0 3.25 3.8 3.25 2.75 2.5 3.25 4.25 3.00 50 60.3 83 1.4 83 1.7 83 70 1.1 83 108 1.4 2 ½ 2.875 3.75 4.3 3.75 6.1 3.75 3.00 4.3 3.75 3.75 4.3 65 73.0 95 2.0 95 2.8 95 76 2.0 95 95 2.0 76.1 mm 3.000 3.75 5.2 —————3.75 3.75 5.2 (sw) 76.1 95 2.4 95 95 2.4 3 3.500 4.25 6.8 4.25 10.5 4.25 3.25 6.1 4.25 6.00 6.8 80 88.9 108 3.0 108 4.8 108 83 2.8 108 152 3.1 3 ½ 4.000 4.50 (sw) 7.9 4.50 11.5 4.50 3.50 9.6 4.50 4.50 7.9 (sw) 90 101.6 114 3.6 114 5.2 114 89 4.4 114 114 73.6 108.0 mm 4.250 5.00 15.5 —————5.00 5.00 15.5 108.0 127 7.0 127 127 7.0 4 4.500 5.00 11.9 5.00 15.8 5.00 3.75 10.0 5.00 7.25 11.9 100 114.3 127 5.4 127 7.2 127 95 4.5 127 184 5.4 4 ½ 5.000 5.25 (sw) 15.0 5.25 18.5 ———5.25 5.25 15.0 (sw) 120 127.0 133 6.8 133 8.4 133 133 6.8 133.0 mm 5.250 5.50 17.8 —————5.50 5.50 17.8 133.0 140 8.1 140 140 8.1 139.7 mm 5.500 5.50 17.8 —————5.50 5.50 17.8 139.7 140 8.1 140 140 8.1 5 5.563 5.50 17.8 5.50 20.0 5.50 4.00 15.0 5.50 5.50 17.8 (sw) 125 141.3 140 8.1 140 9.1 140 102 6.8 140 140 8.1 159.0 mm 6.250 6.50 27.1 —————6.50 6.50 27.1 159.0 165 12.3 165 165 12.3 165.1 mm 6.5006.5022.06.5028.0 ———6.50 6.50 22.0 165.1 165 10.0 165 12.7 165 165 10.0 6 6.625 6.50 25.7 6.50 28.0 6.50 4.50 22.3 6.50 6.50 25.7 (sw) 150 168.3 165 11.7 165 12.7 165 114 10.1 165 165 11.7 8 8.625 7.75 47.6 7.75 48.0 7.75 6.00 36.0 7.75 7.75 47.6 (sw) 200 219.1 197 21.6 197 21.8 197 152 16.3 197 197 21.6 10 10.750 9.00 99.0 9.00 121.5 9.00 6.50 69.9 9.00 9.00 73.0 250 273.0 229 44.9 229 55.1 229 155 31.7 229 229 33.1 12 12.750 10.00 133.0 10.00 110.0 10.00 7.00 80.0 10.00 10.00 99.0 300 323.9 254 60.3 254 49.9 254 178 36.3 254 254 44.9 Tees, Crosses and True Wyes NO. 20 Tee NO. 35 Cross NO. 33 True Wye NO. 29M Tee with Threaded Branch (Ductile Iron *) Tees, Crosses and True Wyes NO. 20 Tee NO. 35 Cross NO. 33 True Wye NO. 29M Tee with Threaded Branch (Ductile Iron *) 07.01_8 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW C to E CtoE NO. 20 C to E NO 35 C to LE C toSE NO. 33 C to GE C to TE NO. 29M Size No. 20 Tee No. 35 Cross (sw) No. 33 True Wye (sw) No. 29M Tee with Threaded Branch Nominal Size Inches mm Actual Outside Dia. Inches mm C to E Inches mm Approx. Weight Each Lbs. kg C to E Inches mm Approx. Weight Each Lbs. kg C to LE Inches mm C to SE Inches mm Approx. Weight Each Lbs. kg C to GE Inches mm C to TE Inches mm Approx. Weight Each Lbs. kg 14 # 14.000 11.00 145.0 11.00 198.0 11.00 7.50 134.2 ———350 355.6 279 65.8 279 89.8 279 191 60.8 377.0 mm 14.000 11.00 145.0 ————————355.6 279 65.8 16 # 16.000 12.00 186.0 12.00 250.0 12.00 8.00 167.0 ———400 406.4 305 84.4 305 113.4 305 203 75.7 426.0 mm †16.000 12.00 186.0 ————————406.4 305 84.4 18 # 18.000 14.00 256.0 15.50 350.0 15.50 8.50 234.0 ———450 457.0 356 116.1 394 158.8 394 216 106.1 480.0 mm†18.000 14.00 256.0 ————————457.0 356 116.1 20 # 20.000 15.00 339.0 17.25 452.0 17.25 9.00 281.0 ———500 508.0 381 153.8 438 205.0 438 229 127.5 530.0 mm †20.000 15.00 339.0 ————————508.0 381 153.8 24 # 24.000 17.00 473.0 20.00 795.0 20.00 10.00 523.0 ———550 610.0 432 214.5 508 360.6 508 254 237.2 630.0 mm †24.000 17.00 473.0 ————————610.0 432 214.5 14 – 24 350 – 600 TM For AGS fitting information, see publication 20.05 * (sw) Segmentally welded steel # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. † Chinese standard sizes IMPORTANT NOTE: Fittings size 26 – 48"/650 – 1050 mm are available roll grooved for installation with Style 770 large diameter pipe couplings, Contact Victaulic for details. Tees, Crosses and True Wyes NO. 20 Tee NO. 35 Cross NO. 33 True Wye NO. 29M Tee with Threaded Branch (Ductile Iron *) Tees, Crosses and True Wyes NO. 20 Tee NO. 35 Cross NO. 33 True Wye NO. 29M Tee with Threaded Branch (Ductile Iron *) 07.01_9 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Size No. 25 Std. No. 29 w/ Thd. Branch Approx. Weight Each Nominal Size Inches mm C to E Inches mm C to E Inches mm Lbs. kg 1 × 1 × ¾ ++1.0 25 20 0.5 1 ¼ × 1 ¼ × 1 ++1.3 32 32 25 0.6 1 ½ × 1 ½ × ¾ ++1.5 40 40 20 0.7 1 ++1.5 25 0.7 1 ¼ ++1.7 32 0.8 2 × 2 × ¾ 3.25 3.25 2.5 50 50 20 83 83 1.1 1 3.25 3.25 2.7 25 83 83 1.2 1 ¼ ++1.8 32 0.8 1 ½ 3.25 3.25 (sw) 3.0 40 83 83 1.4 2 ½ × 2 1⁄2 × ¾ ++3.9 65 65 20 1.8 1 3.75 3.75 (sw) 3.8 25 95 95 1.7 1 ¼ ++4.2 32 1.7 1 ½ 3.75 3.75 3.9 40 95 95 1.8 2 3.75 3.75 (sw) 4.5 50 95 95 2.0 3 × 3 × ¾ ++5.7 80 80 20 2.6 1 4.25 4.25 6.1 25 108 108 2.8 1 ¼ ++8.0 32 3.6 1 ½ 4.25 4.25 (sw) 6.5 40 108 108 2.9 2 4.25 4.25 (sw) 6.2 50 108 108 2.8 2 ½ 4.25 4.25 (sw) 6.4 65 108 108 2.9 4 × 4 × ¾ ++8.0 100 100 20 3.6 1 5.00 5.00 7.8 25 127 127 3.5 C to E Cto E NO. 25 C to E CtoE NO. 29 Size No. 25 Std. No. 29 w/ Thd. Branch Approx. Weight Each Nominal Size Inches mm C to E Inches mm C to E Inches mm Lbs. kg 4 × 4 × 1 ¼ ++9.6 100 100 32 4.4 1 ½ 5.00 5.00 10.2 40 127 127 4.6 2 5.00 5.00 11.2 50 127 127 5.1 2 ½ 5.00 5.00 11.4 65 127 127 5.2 3 5.00 5.00 11.6 80 127 127 5.3 5 × 5 × 1 ++14.0 125 125 25 6.4 1 ½ ++14.3 40 6.5 2 5.50 (sw) 5.50 (sw) 14.5 50 140 140 6.6 2 ½ 5.50 5.50 (sw) 15.2 65 140 140 6.9 3 5.50 5.50 (sw) 16.6 80 140 140 7.5 4 5.50 5.50 (sw) 16.7 100 140 140 7.6 6 × 6 × 1 ++23.0 150 150 25 10.4 1 ½ ++24.0 40 10.9 2 6.50 6.50 21.6 50 165 165 9.8 2 ½ 6.50 6.50 21.4 65 165 165 11.7 14 – 24 350 – 600 TMFor AGS fitting information, see publication 20.05 + Contact Victaulic for details. * Ductile iron except those that are marked (sw), which are segmentally welded steel. # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. IMPORTANT NOTE: No. 29 Threaded Outlet Reducing Tees are supplied NPT and are available with British Standard threads. For British Standard specify "BSP" clearly on order. Reducing Tee NO. 25 Grooved Branch NO. 29 Threaded Branch (Ductile Iron*) 07.01_10 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW C to E Cto E NO. 25 C to E CtoE NO. 29 Size No. 25 Std. No. 29 w/ Thd. Branch Approx. Weight Each Nominal Size Inches mm C to E Inches mm C to E Inches mm Lbs. kg 6 × 6 × 3 6.50 6.50 26.5 150 150 80 165 165 12.0 4 6.50 6.50 25.0 100 165 165 11.3 5 6.50 6.50 23.2 125 165 165 10.5 6 ½ × 6 ½ × 3 6.50 6.50 (sw) 24.0 165.1 165.1 80 165 165 10.9 4 6.50 6.50 (sw) 25.0 100 165 165 11.3 8 × 8 × 1 ½ ++33.0 200 200 40 15.0 2 7.75 (sw) 7.75 (sw) 33.5 50 197 197 15.2 2 ½ ++39.0 65 17.7 3 7.75 (sw) 7.75 (sw) 33.6 80 197 197 15.2 4 7.75 7.75 41.8 100 197 197 19.0 5 7.75 (sw) 7.75 (sw) 34.0 125 197 197 15.4 6 7.75 7.75 42.3 150 197 197 19.2 165.1 7.75 (sw) 7.75 (sw) 48.0 197 197 21.8 10 × 10 × 1 ½ ++62.0 250 250 40 28.1 2 9.00 (sw) 9.00 (sw) 62.0 50 229 229 28.1 2 ½ ++62.4 65 28.3 3 ++60.0 80 27.2 4 9.00 (sw) 9.00 (sw) 61.0 100 229 229 27.7 5 9.00 (sw) 9.00 (sw) 52.0 125 229 229 23.6 6 9.00 (sw) 9.00 (sw) 59.0 150 229 229 26.8 8 9.00 (sw) 9.00 (sw) 64.7 200 229 229 29.3 C to E Cto E NO. 25 C to E CtoE NO. 29 Size No. 25 Std. No. 29 w/ Thd. Branch Approx. Weight Each Nominal Size Inches mm C to E Inches mm C to E Inches mm Lbs. kg 12 × 12 × 1 ++77.0 300 300 25 34.9 2 ++80.0 50 36.3 2 ½ ++78.0 65 35.4 3 10.00 (sw) 10.00 (sw) 82.0 80 254 254 37.2 4 10.00 (sw) 10.00 (sw) 80.0 100 254 254 36.3 5 10.00 (sw) 10.00 (sw) 75.0 125 254 254 34.0 6 10.00 (sw) 10.00 (sw) 75.0 150 254 254 34.0 8 10.00 (sw) 10.00 (sw) 80.0 200 254 254 36.3 10 10.00 (sw) 10.00 (sw) 84.0 250 254 254 38.1 # 14 × 14 × 4 ++102.0 350 350 100 46.3 6 ++108.2 150 49.1 8 11.00 11.00 112.0 200 279 279 50.8 10 11.00 11.00 120.0 300 279 279 54.4 12 11.00 11.00 129.1 300 279 279 58.6 # 16 × 16 × 4 ++130.0 400 400 100 59.0 14 – 24 350 – 600 TMFor AGS fitting information, see publication 20.05 + Contact Victaulic for details. * Ductile iron except those that are marked (sw), which are segmentally welded steel. # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. IMPORTANT NOTE: No. 29 Threaded Outlet Reducing Tees are supplied NPT and are available with British Standard threads. For British Standard specify "BSP" clearly on order. Reducing Tee NO. 25 Grooved Branch NO. 29 Threaded Branch (Ductile Iron *) 07.01_11 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW C to E Cto E NO. 25 C to E CtoE NO. 29 Size No. 25 Std. No. 29 w/ Thd. Branch Approx. Weight Each Nominal Size Inches mm C to E Inches mm C to E Inches mm Lbs. kg # 16 × 16 × 6 ++133.5 400 400 150 60.6 812.00 12.00 145.0 200 305 305 65.8 10 12.00 12.00 149.5 250 305 305 67.8 12 12.00 12.00 154.0 300 305 305 69.9 14 ++167.0 350 75.8 # 18 × 18 × 4 ++194.0 450 450 100 88.0 6 ++200.0 150 90.7 8 ++202.0 200 91.6 10 15.50 15.50 212.0 250 394 394 96.2 12 15.50 15.50 222.6 300 394 394 101.0 14 15.50 – 230.1 350 394 – 104.4 16 15.50 – 247.6 400 394 – 112.3 # 20 × 20 × 6 ++240.0 500 500 150 108.9 8 ++244.0 200 110.7 10 ++256.0 250 116.1 12 ++264.0 300 119.8 14 17.25 —275.0 350 438 124.7 C to E Cto E NO. 25 C to E CtoE NO. 29 Size No. 25 Std. No. 29 w/ Thd. Branch Approx. Weight Each Nominal Size Inches mm C to E Inches mm C to E Inches mm Lbs. kg # 20 × 20 16 17.25 —288.6 500 500 400 438 130.9 18 17.25 —297.0 450 438 134.7 # 24 × 24 × 820.00 20.00 340.0 600 600 200 508 508 154.2 10 20.00 20.00 343.9 250 508 508 156.0 12 20.00 20.00 352.8 300 508 508 160.0 14 § 20.00 —360.0 350 508 163.3 16 20.00 —378.0 400 508 171.5 18 § 20.00 —380.0 450 508 172.4 20 20.00 —373.0 500 508 169.2 14 – 24 350 – 600 TMFor AGS fitting information, see publication 20.05 + Contact Victaulic for details. * Ductile iron except those that are marked (sw), which are segmentally welded steel. # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. IMPORTANT NOTE: No. 29 Threaded Outlet Reducing Tees are supplied NPT and are available with British Standard threads. For British Standard specify "BSP" clearly on order. § Cast fitting available. Contact Victaulic for details. Reducing Tee NO. 25 Grooved Branch NO. 29 Threaded Branch (Ductile Iron *) 07.01_12 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Standpipe Tee NO. 27 (Ductile iron) C to EOB C toEOR NO. 27 Size No. 27 Standpipe Tee Nominal Size Inches mm C to EOR Inches mm C to EOB Inches mm Approx. Weight Each Lbs. kg 4 × 4 × 2 ½ 3.25 4.00 9.1 100 100 65 83 102 4.1 6 × 6 × 2 ½ 3.25 5.13 14.8 150 150 65 83 130 6.7 IMPORTANT NOTE: Available with British Standard Pipe Threads, specify “BSP” clearly on order. Bullhead Tee NO. 21 (Ductile Iron) C toEOB C toEOR NO. 21 Size No. 21 Bullhead Tee Nominal Size Inches mm C to EOR Inches mm C to EOB Inches mm Approx. Weight Each Lbs. kg 5 × 5 × 87.75 5.50 28.7 125 125 200 197 140 13.0 6 × 6 × 87.75 6.50 37.5 150 150 200 197 165 17.0 Bull Plug NO. 61 (Steel) E to E NO. 61 Size No. 61 Bull Plug Nominal Size Inches mm Actual Outside Diameter Inches mm E to E Inches mm Approx. Weight Each Lbs. kg 22.3754.002.5 50 60.3 102 1.1 2 ½ 2.875 5.00 3.0 65 73.0 127 1.4 3 3.500 6.00 4.5 80 88.9 152 2.0 4 4.500 7.00 7.5 100 114.3 178 3.4 55.5638.0012.0 125 141.3 203 5.4 66.62510.0017.0 150 168.3 254 7.7 IMPORTANT NOTES: Steel dish caps available through 24"/600 mm, contact Victaulic. No. 61 Bull Plugs should be used in vacuum service with Style 72 or 750 couplings 07.01_13 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW 45° Lateral NO. 30 (Segmentally Welded Steel) C to L E C to LE C toSE NO. 30 Size No. 30 45º Lateral Nominal Size Inches mm Actual Outside Diameter Inches mm C to LE Inches mm C to SE Inches mm Approx. Weight Each Lbs. kg ¾ 1.050 4.50 2.00 1.0 20 26.9 114 51 0.5 11.3155.002.251.7 25 33.7 127 57 0.8 1 ¼ 1.660 5.75 2.50 2.5 (d) 32 42.4 146 64 1.1 1 ½ 1.900 6.25 2.75 3.5 40 48.3 159 70 1.6 2 2.375 7.00 2.75 4.6 (d) 50 60.3 178 70 2.1 2 ½ 2.875 7.75 3.00 9.0 65 73.0 197 76 94.1 76.1 mm 3.000 8.50 3.25 11.0 76.1 216 83 5.0 33.5008.503.2511.7 (d) 80 88.9 216 83 5.4 3 ½ 4.000 10.00 3.50 17.8 90 101.6 254 89 8.1 4 4.500 10.50 3.75 22.2 (d) 100 114.3 267 95 10.1 55.56312.504.0021.8 125 141.3 318 102 9.9 165.1 mm 6.500 14.00 4.50 43.6 165.1 356 114 19.8 45° Lateral NO. 30 (Segmentally Welded Steel) C to L E C to LE C toSE NO. 30 Size No. 30 45º Lateral Nominal Size Inches mm Actual Outside Diameter Inches mm C to LE Inches mm C to SE Inches mm Approx. Weight Each Lbs. kg 66.62514.004.5043.6 150 168.3 356 114 19.8 8 8.625 18.00 6.00 72.0 200 219.1 457 152 32.7 10 10.750 20.50 6.50 105.0 250 273.0 521 165 47.6 12 12.750 23.00 7.00 165.0 300 323.9 584 178 74.8 14 # 14.000 26.50 7.50 276.0 350 355.6 673 191 125.2 16 # 16.000 29.00 8.00 344.2 400 406.4 737 203 156.1 18 # 18.000 32.00 8.50 429.0 450 457.0 813 216 194.6 20 # 20.000 35.00 9.00 500.0 500 508.0 889 229 226.8 24 # 24.000 40.00 10.00 715.0 600 610.0 1016 254 324.3 14 – 24 350 – 600 TM For AGS fitting information, see publication 20.05 (d) Ductile iron # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. 07.01_14 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW 45º Reducing Lateral NO. 30-R (Segmentally Welded Steel) C to L E C to LE C to SE NO. 30-R Size No. 30-R 45º Reducing Lateral Nominal Size Inches mm C to LE Inches mm C to SE Inches mm Approx. Weight Each Lbs. kg 3 x 3 x 28.50 3.25 9.8 80 80 50 216 83 4.4 2 1⁄2 8.50 3.25 9.8 65 216 83 4.4 4 x 4 x 210.50 3.75 10.0 100 100 50 267 95 4.5 2 ½ 10.50 3.75 10.0 65 267 95 4.5 310.50 3.75 18.3 80 267 95 8.3 5 x 5 x 212.50 4.00 24.0 125 125 50 318 102 10.9 312.50 4.00 27.0 80 318 102 212.2 412.50 4.00 26.5 100 318 102 12.0 6 x 6 x 3 14.00 4.50 37.0 150 150 80 356 114 16.8 4 14.00 4.50 36.0 100 356 114 16.3 5 14.00 4.50 44.7 125 356 114 20.3 8 x 8 x 418.00 6.00 62.0 200 200 100 457 152 28.1 518.00 6.00 75.5 125 457 152 34.2 618.00 6.00 82.0 150 457 152 37.2 10 x 10 x 4 20.50 6.50 104.8 250 250 100 521 165 147.5 5 20.50 6.50 99.0 125 521 165 44.9 6 20.50 6.50 105.8 150 521 165 48.0 8 20.50 6.50 118.0 200 521 165 53.5 12 x 12 x 5 23.00 7.00 122.0 300 300 125 584 178 55.3 6 23.00 7.00 137.0 150 584 178 62.1 8 23.00 7.00 147.0 200 584 178 66.7 10 23.00 7.00 167.0 250 584 178 75.8 45º Reducing Lateral NO. 30-R (Segmentally Welded Steel) C to L E C to LE C to SE NO. 30-R Size No. 30-R 45º Reducing Lateral Nominal Size Inches mm C to LE Inches mm C to SE Inches mm Approx. Weight Each Lbs. kg # 14 x 14 x 4 26.50 7.50 172.0 350 350 100 673 191 78.0 6 26.50 7.50 187.0 150 673 191 84.8 8 26.50 7.50 205.8 200 673 191 93.4 10 26.50 7.50 235.0 250 673 191 106.6 12 26.50 7.50 250.0 300 673 191 113.4 # 16 x 16 x 629.00 8.00 215.0 400 400 150 737 203 97.5 829.00 8.00 252.5 200 737 203 114.5 10 29.00 8.00 265.0 250 737 203 120.2 12 29.00 8.00 295.0 300 737 203 133.8 14 29.00 8.00 305.0 350 737 203 138.3 # 18 x 18 x 632.00 8.50 274.0 450 450 150 813 216 124.3 832.00 8.50 275.0 200 813 216 124.7 12 32.00 8.50 347.0 300 813 216 157.4 14 32.00 8.50 350.0 350 813 216 158.8 16 32.00 8.50 362.0 400 813 216 164.2 # 20 x 20 x 12 35.00 9.00 415.0 500 500 300 889 229 188.2 14 35.00 9.00 420.0 350 889 229 190.5 16 35.00 9.00 425.0 400 889 229 192.8 # 24 x 24 x 16 40.00 10.00 425.0 600 600 400 1016 254 192.8 20 40.00 10.00 570.0 600 1016 254 258.6 14 – 24 350 – 600 TMFor AGS fitting information, see publication 20.05 # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. 07.01_15 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Tee Wye NO. 32 (Segmentally Welded Steel)H G E2 E1 NO. 32 Size No. 32 Tee Wye Nominal Size Inches mm G Inches mm H Inches mm E1 Inches mm E2 Inches mm Approx. Wgt. Each Lbs. kg 2 × 2 × 2 2.75 7.00 9.00 4.63 6.4 50 50 50 70 178 229 118 2.9 2 ½ × 2 ½ × 2 ½ 3.00 7.75 10.50 5.75 11.5 65 65 65 76 197 267 146 5.2 3 × 3 × 33.258.5011.506.5014.3 80 80 80 83 216 292 165 6.5 3 ½ × 3 ½ × 3 ½ 3.25 10.00 13.00 7.75 22.9 90 90 90 89 254 330 197 10.4 4 × 4 × 3 3.75 10.50 12.88 7.88 23.0 100 100 80 95 267 327 200 10.4 43.7510.5013.638.13 26.0 100 95 267 346 207 11.8 5 × 5 × 3 4.00 12.50 14.25 9.25 29.0 125 125 80 102 318 362 235 13.2 44.0012.5015.139.6336.7 100 102 318 384 245 16.6 54.0012.5016.1310.0048.0 125 102 318 410 254 21.8 6 × 6 × 34.5014.0015.3110.3137.3 150 150 80 114 356 389 262 16.9 44.5014.0016.2510.7546.3 100 114 356 413 273 21.0 54.5014.0017.2511.1355.0 125 114 356 438 283 24.9 6 4.50 14.00 18.25 11.50 60.5 150 114 356 464 292 27.4 Tee Wye NO. 32 (Segmentally Welded Steel)H G E2 E1 NO. 32 Size No. 32 Tee Wye Nominal Size Inches mm G Inches mm H Inches mm E1 Inches mm E2 Inches mm Approx. Wgt. Each Lbs. kg 8 × 8 × 36.0018.0018.1913.1976.0 200 200 80 152 457 462 335 34.5 4 6.00 18.00 19.00 13.50 76.4 100 152 457 483 343 34.7 56.0018.0020.0013.8885.6 125 152 457 508 352 38.8 66.0018.0021.1314.38112.0 150 152 457 537 365 50.8 86.0018.0023.2515.25127.1 200 152 457 591 387 57.7 10 × 10 × 36.5020.5019.8814.8896.0 250 250 80 165 521 505 378 43.5 46.5020.5020.7515.2597.4 100 165 521 527 387 44.2 5 6.50 20.50 21.88 15.75 115.0 125 165 521 556 400 52.2 10 × 10 × 6 6.50 20.50 22.88 16.13 133.1 250 250 150 165 521 581 410 60.4 86.5020.5027.2519.25156.0 200 165 521 692 489 70.8 10 6.50 20.50 27.25 18.00 190.0 250 165 521 692 457 186.2 12 × 12 × 12 7.00 23.00 31.00 20.50 240.0 300 300 300 178 584 787 521 108.9 07.01_16 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Reducing Tee Wye NO. 32-R (Segmentally Welded Steel)H G E2 E1 NO. 32-R Size No. 32-R Reducing Tee Wye Nominal Size Inches mm G Inches mm H Inches mm E1 Inches mm E2 Inches mm Approx. Wgt. Each Lbs. kg 4 × 3 × 3 3.50 9.50 10.75 5.75 16.0 100 80 80 89 241 273 146 7.3 43.7510.5013.638.13 16.0 100 95 267 346 206 7.3 5 × 3 × 31.259.7511.507.63 25.0 125 80 80 32 248 292 194 11.3 54.0012.5016.1311.1343.4 125 102 318 410 283 19.5 5 × 4 × 31.889.1311.886.88 21.0 125 100 80 48 232 302 175 9.5 41.889.1312.757.25 25.0 100 48 232 324 184 11.3 Reducing Tee Wye NO. 32-R (Segmentally Welded Steel)H G E2 E1 NO. 32-R Size No. 32-R Reducing Tee Wye Nominal Size Inches mm G Inches mm H Inches mm E1 Inches mm E2 Inches mm Approx. Wgt. Each Lbs. kg 6 × 4 × 64.5014.0018.2511.5061.0 150 100 150 114 356 464 292 27.7 6 × 5 × 3 1.25 10.75 13.00 8.00 27.0 150 125 80 32 273 330 203 12.2 41.2510.7513.888.38 31.0 100 32 273 352 213 14.1 8 × 6 × 41.0012.0014.759.25 45.0 200 150 100 25 304 375 235 20.4 86.0018.0023.2515.25112.0 200 152 457 591 387 50.8 07.01_17 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Adapter Nipple NO. 40 Grv. × Thd. NO. 42 Grv. × Bev. NO. 43 Grv. × Grv. (Steel) E to E NO. 40 * E to E NO. 42 E to E NO. 43 Size No. 40, 42, 43 Adapter Nipple (sw) Nominal Size Inches mm Actual Outside Diameter Inches mm E to E Inches mm Approx. Weight Each Lbs. kg 3/4 1.050 3.00 0.3 20 26.9 76 0.1 11.3153.000.4 25 33.7 76 0.2 1¼ 1.660 4.00 0.8 32 42.4 102 0.4 1½ 1.900 4.00 0.9 40 48.3 102 0.4 22.3754.001.2 50 60.3 102 0.5 2½ 2.875 4.00 1.9 65 73.0 102 0.9 3 3.500 4.00 2.5 80 88.9 102 1.1 3½ 4.000 4.00 2.1 90 101.6 102 0.9 4 4.500 6.00 5.5 100 114.3 152 2.5 55.5636.007.4 125 141.3 152 3.4 Adapter Nipple NO. 40 Grv. × Thd. NO. 42 Grv. × Bev. NO. 43 Grv. × Grv. (Steel) E to E NO. 40 * E to E NO. 42 E to E NO. 43 Size No. 40, 42, 43 Adapter Nipple (sw) Nominal Size Inches mm Actual Outside Diameter Inches mm E to E Inches mm Approx. Weight Each Lbs. kg 66.6256.009.5 150 168.3 152 4.3 88.6256.0014.2 200 219.1 152 6.4 10 10.750 8.00 27.0 250 273.0 203 12.2 12 12.750 8.00 33.0 300 323.9 203 15.0 * Available with British Standard Pipe Threads, specify “BSP” clearly on order. IMPORTANT NOTES: For pump package nipples with 1 ½"/40 mm hole cut to receive Style 923 Vic-Let or Style 924 Vic-O-Well request special No. 40, 42 or 43 nipples and specify No. 40-H, 42-H or 43-H on order. NOTE: 4 – 12"/100 – 300 mm diameter – 8"/200 mm minimum length required. # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. 07.01_18 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Cap NO. 60 (Ductile Iron) T NO. 60 Size No. 60 Cap Nominal Size Inches mm Actual Outside Diameter Inches mm T Thickness Inches mm Approx. Weight Each Lbs. kg 3/4 1.050 0.88 0.2 20 26.9 22 0.1 1 1.315 0.88 0.3 25 33.7 22 0.1 1 1/4 1.660 0.88 0.3 32 42.4 22 0.1 1 1/2 1.900 0.88 0.5 40 48.3 22 0.2 2 2.375 0.88 0.6 50 60.3 22 0.3 2 1/2 2.875 0.88 1.0 65 73.0 22 0.5 76.1 mm 3.000 0.88 1.2 76.1 22 0.5 33.5000.881.2 80 88.9 22 0.5 3 1/2 4.000 0.88 2.5 90 101.6 22 1.1 108.0 mm 4.250 1.00 2.3 108.0 25 1.0 4 4.500 1.00 2.5 100 114.3 25 1.1 4 1/2 5.000 1.00 2.5 120 127.0 25 1.1 133.0 mm 5.250 1.00 4.5 133.0 25 2.0 139.7 mm 5.500 1.00 4.5 139.7 25 2.0 55.5631.004.6 125 141.3 25 2.1 159.0 mm 6.250 1.00 6.8 159.0 25 3.1 Cap NO. 60 (Ductile Iron) T NO. 60 Size No. 60 Cap Nominal Size Inches mm Actual Outside Diameter Inches mm T Thickness Inches mm Approx. Weight Each Lbs. kg 165.1 mm 6.500 1.00 7.3 165.1 25 3.3 66.6251.006.1 150 168.3 25 2.8 88.6251.1913.1 200 219.1 30 5.9 10 10.750 1.25 21.0 250 273.0 32 9.5 12 12.750 1.25 35.6 300 323.9 32 16.2 14 # 14.000 9.50 *350 355.6 241 16 # 16.000 10.00 *400 406.4 254 18 # 18.000 11.00 *450 457.0 279 20 # 20.000 12.00 *500 508.0 305 24 # 24.000 * *600 610.0 14 – 24 350 – 600 TM For AGS fitting information, see publication 20.05 IMPORTANT NOTES: * Steel dish caps available through 24"/600 mm, contact Victaulic. No. 60 cap is not suitable for use in vacuum service with Style 72 or 750 couplings. No. 61 bull plugs should be used, see pg. 35. # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. 07.01_19 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Flanged Adapter Nipple NO. 41 ANSI Class 125 (Cast Iron) NO. 45F ANSI Class 150 Flat Face (Steel) NO. 45R ANSI Class 150 Raised Face (Steel) NO. 46F ANSI Class 300 Flat Face (Steel) NO. 46R ANSI Class 300 Raised Face (Steel) E to E NO. 41 E to E NO. 45F E to E NO. 45R E to E NO. 46F E to E NO. 46R Size No. 41 ANSI 125 Flange Adapter Nipple No. 45F and No. 45R ANSI 150 Flange Adapter Nipple No. 46F and No. 46R ANSI 300 Flange Adapter Nipple Nominal Size Inches mm Actual Outside Diameter Inches mm E to E Inches mm Approx. Weight Each Lbs. kg E to E Inches mm Approx. Weight Each Lbs. kg E to E Inches mm Approx. Weight Each Lbs. kg ¾ 1.050 3 —3 2.3 3 3.3 20 26.9 76 76 1.0 76 1.5 11.3153 2.5 3 2.7 3 3.9 25 33.7 76 1.1 76 1.2 76 1.8 1¼ 1.660 4 3.0 4 3.3 4 4.8 32 42.4 102 1.4 102 1.5 102 2.2 1½ 1.900 4 3.5 4 3.9 4 6.9 40 48.3 102 1.6 102 1.8 102 3.1 2 2.375 4 5.5 4 6.2 4 8.2 50 60.3 102 2.5 102 2.8 102 3.7 2½ 2.875 4 8.0 4 9.9 4 11.9 65 73.0 102 3.6 102 4.5 102 5.4 3 3.500 4 9.5 4 11.4 4 16.5 80 88.9 102 4.3 102 5.2 102 7.5 3½ 4.00412.0415.1420.1 90 101.6 102 5.4 102 6.8 102 9.1 44.500616.7618.4627.4 100 114.3 152 7.6 152 8.3 152 12.4 55.563621.5621.3635.3 125 141.3 152 9.8 152 9.7 152 16.0 66.625626.5627.5647.5 150 168.3 152 12.0 152 12.5 152 21.5 8 8.625639.0641.3670.3 200 219.1 152 17.7 152 18.8 152 31.9 10 10.750 8 57.0 8 59.8 8 100.8 250 273.0 203 25.9 203 27.1 203 45.7 12 12.750841.0888.28146.2 300 323.9 203 18.6 203 40.0 203 66.3 14 # 14.000 8 —8 +8 +350 355.6 203 203 203 16 # 16.000 8 —8 +8 +400 406.4 203 203 203 18 # 18.000 8 —8 +8 +450 457.0 203 203 203 20 # 20.000 8 —8 +8 +500 508.0 203 203 203 24 # 24.000 8 —8 +8 +600 610.0 203 203 203 14 – 24 350 – 600 TM For AGS fitting information, see publication 20.05 IMPORTANT NOTES: + Contact Victaulic for details. Flanged adapter nipples are supplied with standard rolled grooves. Standard cut grooves or machining for rubber lining are optionally available. Contact Victaulic for details. # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. 07.01_20 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Swaged Nipple NO. 53 Grv. × Grv. NO. 54 Grv. × Thd. NO. 55 Thd. × Grv. (Steel) E to E NO. 53 E to E NO. 54 E to E NO. 55 Size No. 53, 54 and 55 Swaged Nipples Nominal Size Inches mm E to E Inches mm Approx. Weight Each Lbs. kg 2 × 16.50 2.0 50 25 165 0.9 1 1/4 6.50 2.0 32 165 0.9 1 1/2 6.50 2.0 40 165 0.9 2 1/2 × 1 7.00 3.0 65 25 178 1.4 1 1/4 7.00 3.0 32 178 1.4 1 1/2 7.00 3.0 40 178 1.4 2 7.00 3.0 50 178 1.4 3 × 1 8.00 4.5 80 25 203 2.0 1 1/4 8.00 4.5 32 203 2.0 1 1/2 8.00 4.4 40 203 2.0 28.00 4.5 50 203 2.0 2 1/2 8.00 4.5 65 203 2.0 3 1/2 × 38.00 6.8 90 80 203 3.1 4 × 19.00 7.5 100 25 229 3.4 1 1/4 9.00 7.5 32 229 3.4 1 1/2 9.00 7.5 40 229 3.4 2 9.00 7.5 50 229 3.4 4 × 2 1/2 9.00 7.5 100 65 229 3.4 Swaged Nipple NO. 53 Grv. × Grv. NO. 54 Grv. × Thd. NO. 55 Thd. × Grv. (Steel) E to E NO. 53 E to E NO. 54 E to E NO. 55 Size No. 53, 54 and 55 Swaged Nipples Nominal Size Inches mm E to E Inches mm Approx. Weight Each Lbs. kg 4 × 39.00 7.5 100 80 229 3.4 3 1/2 9.00 7.5 90 229 3.4 5 × 211.00 11.5 125 50 279 5.2 3 11.00 11.3 80 279 5.1 4 11.00 11.5 100 279 5.2 6 × 112.00 17.0 150 25 305 7.7 1 1/4 12.00 17.0 32 305 7.7 1 1/2 12.00 17.2 40 305 7.8 2 12.00 17.4 50 305 7.9 2 1/2 12.00 17.4 65 305 7.9 3 12.00 17.4 80 305 7.9 3 1/2 12.00 17.4 90 305 7.9 4 12.00 17.5 100 305 7.9 4 1/2 12.00 17.5 120 305 7.9 5 12.00 17.5 125 305 7.9 8 × 6 +20.0 200 150 9.1 + Contact Victaulic for details. 07.01_21 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Female Threaded Adapter NO. 80 (Ductile Iron *)E to E NO. 80 Size No. 80 Female Threaded Adapter Nominal Size Inches mm Actual Outside Diameter Inches mm E to E Inches mm Approx. Weight Each Lbs. kg 3/4 1.050 2.00 1.0 20 26.9 51 0.5 11.3152.061.0 25 33.7 52 0.5 1 1/4 1.660 2.31 (sw) 1.5 32 42.4 59 0.7 1 1/2 1.900 2.31 (sw) 1.5 40 48.3 59 0.7 22.3752.501.4 50 60.3 64 0.6 2 1/2 2.875 2.75 1.5 65 73.0 70 0.7 3 3.500 2.75 2.9 80 88.9 70 1.3 44.5003.254.5 100 114.3 83 2.0 * Ductile iron except those marked (sw) which are segmentally welded steel. IMPORTANT NOTE: Available with British Standard Pipe threads, specify “BSP” clearly on order. Hose Nipple NO. 48 (Segmentally Welded Steel) E to E NO. 48 Size No. 48 Hose Nipple Nominal Size Inches mm Actual Outside Diameter Inches mm E to E Inches mm Approx. Weight Each Lbs. kg 3/4 1.050 3.12 0.3 20 26.9 79 0.1 11.3153.380.4 25 33.7 86 0.2 1 1/4 1.660 3.88 0.6 32 42.4 98 0.3 1 1/2 1.900 3.88 0.8 40 48.3 98 0.4 22.3754.501.1 50 60.3 114 0.5 2 1/2 2.875 5.38 2.0 65 73.0 137 0.9 33.5005.753.2 80 88.9 146 1.5 4 4.500 7.00 4.9 100 114.3 178 2.2 5 5.563 8.75 8.0 125 141.3 222 3.6 66.62510.1214.3 150 168.3 257 6.5 88.62511.8824.7 200 219.1 302 11.2 10 10.750 12.50 40.1 250 273.0 318 18.2 12 12.750 14.50 62.0 300 323.9 368 28.1 07.01_22 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Concentric/Eccentric Reducer NO. 50 Concentric NO. 51 Eccentric (Ductile Iron ‡) Eto E NO. 50 E to E NO. 51 Size No. 50 Concentric Reducer No. 51 Eccentric Reducer Nominal Size Inches mm E to E Inches mm Approx. Weight Each Lbs. kg E to E Inches mm Approx. Weight Each Lbs. kg 1 1/4 × 3/4 +1.9 ——32 20 0.9 1 +1.9 ——25 0.9 1 1/2 × 3/4 +1.4 —— 40 20 0.6 1 2.50 * (sw) 0.8 8.50 4.5 25 64 0.4 216 2.0 1 1/4 2.50 * (sw) 1.0 ——32 64 0.5 2 × 3/4 2.50 * (sw) 0.9 9.00 2.0 50 20 64 0.3 229 0.9 1 2.50 * (sw) 0.7 9.00 2.3 25 64 0.3 229 1.0 1 1/4 2.50 * (sw) 1.2 9.00 4.6 32 64 0.5 229 2.1 1 1/2 2.50 * (sw) 1.0 9.00 4.6 40 64 0.5 229 2.1 2 1/2 × 3/4 +1.3 +3.3 65 20 0.6 1.5 19.50 3.6 9.50 3.5 25 64 1.5 241 1.6 1 1/4 2.50 * (sw) 3.3 9.50 +32 64 1.5 241 1 1/2 2.50 * (sw) 3.6 9.50 3.7 40 64 1.6 241 1.7 2 2.50 (sw) 3.9 9.50 4.3 50 64 1.8 241 2.0 3 × 3/4 +1.5 +4.5 80 20 0.7 2.0 1 2.50 * (sw) 1.3 9.50 4.8 25 64 0.6 241 2.2 1 1/4 +3.0 +4.8 32 1.4 2.2 1 1/2 2.50 * (sw) 5.1 9.50 5.1 40 64 2.3 241 2.3 2 2.50 * (sw) 1.6 3.50 (sw) 6.0 50 64 0.7 89 2.7 2 1/2 2.50 * (sw) 1.8 3.50 (sw) 7.0 65 64 0.8 89 3.2 76.1 2.50 (sw) 2.1 ——64 1.0 Concentric/Eccentric Reducer NO. 50 Concentric NO. 51 Eccentric (Ductile Iron ‡) Eto E NO. 50 E to E NO. 51 Size No. 50 Concentric Reducer No. 51 Eccentric Reducer Nominal Size Inches mm E to E Inches mm Approx. Weight Each Lbs. kg E to E Inches mm Approx. Weight Each Lbs. kg 3 1/2 × 3 2.50 (sw) 2.0 9.50 7.0 90 80 64 0.9 241 3.2 4 × 1 3.00 * (sw) 3.0 13.00 6.5 100 25 76 1.4 330 2.9 1 1/4 +4.6 ——32 2.1 1 1/2 10.00 6.9 10.00 8.1 40 254 3.1 254 3.7 2 3.00 * (sw) 2.4 4.00 (sw) 3.3 50 76 1.1 102 1.5 2 1/2 3.00 * (sw) 2.7 4.00 (sw) 3.4 65 76 1.2 102 1.5 3 3.00 * (sw) 3.2 4.00 (sw) 3.5 80 76 1.4 102 1.6 3 1/2 3.00 (sw) 2.9 10.00 8.0 90 76 1.3 254 3.6 5 × 2 11.00 9.0 11.00 5.2 125 50 279 4.1 279 2.4 2 1/2 11.00 11.0 11.00 10.8 65 279 5.0 279 4.9 3 4.00 (sw) 55 11.00 11.1 80 102 2.5 279 5.0 4 3.50 (sw) 4.3 5.00 (sw) 12.0 100 89 1.9 127 5.4 6 × 1 4.00 * (sw) 5.0 11.50 14.5 150 25 102 2.3 292 6.6 1 1/2 +5.5 ++40 2.5 2 4.00 * (sw) 6.6 11.50 14.5 50 102 3.0 292 6.6 2 1/2 4.00 * (sw) 6.4 11.50 14.2 65 102 2.9 292 6.4 3 4.00 * (sw) 6.4 5.50 (sw) 15.0 80 102 2.9 140 6.8 4 4.00 (sw) 6.5 5.50 (sw) 17.0 100 102 2.9 140 7.7 5 4.00 (sw) 6.4 5.50 (sw) 17.0 125 102 2.9 140 7.7 8 × 2 1/2 16.00 * (sw) 7.9 12.00 26.1 200 65 406 3.6 305 11.8 3 5.00 (sw) 9.3 12.00 22.0 80 127 4.2 305 10.0 07.01_23 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Concentric/Eccentric Reducer NO. 50 Concentric NO. 51 Eccentric (Ductile Iron ‡) Eto E NO. 50 E to E NO. 51 Size No. 50 Concentric Reducer No. 51 Eccentric Reducer Nominal Size Inches mm E to E Inches mm Approx. Weight Each Lbs. kg E to E Inches mm Approx. Weight Each Lbs. kg 8 × 4 5.00 (sw) 10.4 12.00 23.0 200 100 127 4.8 305 10.4 5 5.00 (sw) 11.6 12.00 23.0 125 127 5.2 305 10.4 6 5.00 (sw) 11.9 6.00 (sw) 24.0 150 127 5.4 152 10.9 10 × 4 6.00 (sw) 19.7 13.00 32.0 250 100 152 8.9 330 14.5 5 +34.3 +34.6 125 15.6 15.7 6 6.00 (sw) 20.0 13.00 36.9 150 152 9.1 330 16.7 8 6.00 (sw) 22.0 7.00 (sw) 21.6 200 152 10.0 178 9.8 12 × 4 +44.0 14.00 48.0 300 100 20.0 356 21.8 6 7.00 (sw) 24.6 14.00 50.0 150 178 11.2 356 22.7 8 7.00 (sw) 52.0 14.00 53.5 200 178 23.6 356 24.3 10 7.00 (sw) 39.0 14.00 57.0 250 178 17.7 356 25.9 # 14 × 6 13.00 65.0 13.00 60.0 350 150 330 29.5 330 27.2 8 13.00 65.0 13.00 60.0 200 330 29.5 330 27.2 10 13.00 66.0 13.00 65.0 250 330 29.9 330 29.5 12 13.00 68.0 13.00 66.0 300 330 30.8 330 29.9 # 16 × 814.00 73.0 14.00 73.0 400 200 356 33.1 355 33.1 10 § 14.00 73.0 14.00 73.0 250 356 33.1 355 33.1 12 14.00 73.0 14.00 73.0 300 356 33.1 355 33.1 14 14.00 73.0 14.00 73.0 350 356 33.1 355 33.1 # 18 × 10 15.00 91.0 15.00 91.0 450 250 381 41.3 381 41.3 Concentric/Eccentric Reducer NO. 50 Concentric NO. 51 Eccentric (Ductile Iron ‡) Eto E NO. 50 E to E NO. 51 Size No. 50 Concentric Reducer No. 51 Eccentric Reducer Nominal Size Inches mm E to E Inches mm Approx. Weight Each Lbs. kg E to E Inches mm Approx. Weight Each Lbs. kg # 18 x 12 15.00 91.0 15.00 91.0 450 300 381 41.3 381 41.3 14 15.00 91.0 15.00 91.0 350 381 41.3 381 41.3 16 15.00 91.0 15.00 91.0 400 381 41.3 381 41.3 # 20 × 10 20.00 110.0 20.00 177.0 500 250 508 49.9 508 80.3 12 20.00 120.0 20.00 120.0 300 508 54.4 508 54.4 14 20.00 149.0 20.00 149.0 350 508 67.9 508 67.9 16 20.00 120.0 20.00 120.0 400 508 54.4 508 54.4 18 20.00 136.0 20.00 136.0 450 508 61.7 508 61.7 # 24 × 10 20.00 142.0 20.00 142.0 600 250 508 64.4 508 64.4 12 20.00 150.0 20.00 150.0 300 508 68.0 508 68.0 14 20.00 162.0 20.00 162.0 350 508 73.5 508 73.5 16 20.00 162.0 20.00 162.0 400 508 73.5 508 73.5 18 20.00 162.0 20.00 162.0 450 508 73.5 508 73.5 20 20.00 151.0 20.00 190.0 500 508 68.5 508 86.2 14 – 24 350 – 600 TM For AGS fitting information, see publication 20.05 + Contact Victaulic for details. * Available with male threaded small end No. 52. ‡ Ductile Iron except those marked (sw) which are segmentally welded steel. IMPORTANT NOTE: Steel eccentric reducers available through 30"/750 mm, contact Victaulic for dimensions. # For use on cut grooved systems only. For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. § cast fitting available for J.I.S. size. Contact Victaulic for details. 07.01_24 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW Small Threaded Reducer NO. 52 (Ductile Iron *)Eto E NO. 52 Eto E NO. 52F Size No. 52 Small Threaded Reducer No. 52F Concentric Reducer with BSPT Female Threaded End Nominal Size Inches mm E to E Inches mm Approx. Weight Each Lbs. kg E to E Inches mm Approx. Weight Each Lbs. kg 1 1/2 × 12.50 0.8 ——40 25 64 0.4 1 1/4 2.50 0.9 ——32 64 0.4 2 × 3/4 2.50 0.9 ——50 20 64 0.4 12.50 0.7 ——25 64 0.3 1 1/4 2.50 1.2 ——32 64 0.5 1 1/2 2.50 1.0 ——40 64 0.5 2 1/2 × 1 + (sw)1.0 ——65 25 0.5 1 1/4 2.50 (sw) 1.2 ——32 64 0.5 1 1/2 2.50 (sw) 1.3 ——40 64 0.6 2 3.00 1.4 ——50 76 0.6 76.1 × 48.3 63.5 0.8 63.5 0.77 60 — — 63.5 0.85 3 × 3/4 + (sw)1.5 ——80 20 0.7 12.50 1.3 ——25 64 0.6 1 1/2 2.50 (sw) 1.5 ——40 64 0.7 2 2.50 1.5 ——50 64 0.7 2 1/2 2.50 2.4 ——65 64 1.1 88.9 × 42.4 63.5 0.9 63.5 0.82 48.3 63.5 0.9 63.5 0.85 60 — — 63.5 0.89 4 × 13.00 2.3 ——100 25 76 1.0 1 1/2 + (sw)2.5 ——40 1.1 23.00 2.6 ——50 76 1.2 Small Threaded Reducer NO. 52 (Ductile Iron *)Eto E NO. 52 Eto E NO. 52F Size No. 52 Small Threaded Reducer No. 52F Concentric Reducer with BSPT Female Threaded End Nominal Size Inches mm E to E Inches mm Approx. Weight Each Lbs. kg E to E Inches mm Approx. Weight Each Lbs. kg 4 × 2 1/2 3.00 2.6 ——100 65 76 1.2 3 3.00 2.5 ——80 76 1.1 108 × 42.4 76.2 1.3 76.2 1.32 48.3 76.2 1.3 76.2 1.35 60 — — 76.2 1.39 114.3 × 42.4 76.2 1.3 76.2 1.30 48.3 76.2 1.3 76.2 1.34 60 — — 76.2 1.40 5 × 4 +4.5 ——125 100 2.0 133 × 60 — — 114.3 2.17 139 × 60 — — 114.3 2.26 6 × 14.00 5.5 ——150 25 102 2.5 2 4.00 5.7 ——50 102 2.6 2 1/2 4.00 5.8 ——65 102 2.6 3 4.00 5.8 ——80 102 2.6 4 + (sw)6.5 ——100 2.9 5 + (sw)2.0 ——125 0.9 159 x 42.4 114.3 2.2 114.3 2.45 48.3 114.3 2.2 114.3 2.51 60 — — 114.3 2.60 165.1 x 42.4 101.6 2.4 101.6 2.90 48.3 101.6 2.6 101.6 2.95 60 — — 101.6 3.00 8 × 216.00 1.5 ——200 50 406 0.7 2 1/2 16.00 1.7 ——65 406 0.8 + Contact Victaulic for details. * Ductile iron except those marked (sw) which are segmentally welded steel. IMPORTANT NOTE: Available with British Standard Pipe Threads, specify "BSP" clearly on order 07.01_25 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. REV_L NO. 20 TEENO. 10 ELBOW WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. NOTE 07.01 Grooved End Fittings 07.01IPS CARBON STEEL PIPE - GROOVED FITTINGS WCAS-6M8PF7 UPDATED 9/2006 07.01 1449 REV L VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2006 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA. US & WORLD HEADQUARTERS P.O. Box 31 Easton, PA 18044-0031 USA 4901 Kesslersville Road Easton, PA 18040 USA 1-800-PICK-VIC (1-800-742-5842) 1-610-559-3300 1-610-250-8817 (fax) pickvic@victaulic.com CANADA 905-884-7444 905-884-9774 (fax) viccanada@victaulic.com EUROPE 32-9-381-15-00 32-9-380-44-38 (fax) viceuro@victaulic.be UNITED KINGDOM 44 (0) 1438741100 44 (0) 1438313883 (fax) viceuro@victaulic.be CENTRAL AND SOUTH AMERICA 1-610-559-3300 1-610-559-3608 (fax) vical@victaulic.com ASIA PACIFIC 86-21-54253300 86-21-54253671 (fax) vicap@victaulic.com MIDDLE EAST 971-4-883-88-70 971-4-883-88-60 (fax) www.victaulic.com NO. 20 TEENO. 10 ELBOW