HomeMy WebLinkAboutPRODUCT DATA - HANGING MATERIAL RING - 18-00176 - 220 S 2nd W - Arbor Cove - Bldg (C) #2 - 32 Units - New Dormitory HousingPH-1.18
PROJECT INFORMATION APPROVAL STAMP
Project:q Approved
Address:q Approved as noted
Contractor:q Not approved
Engineer:Remarks:
Submittal Date:
Notes 1:
Notes 2:
RING HANGERS
FIG. 69: DIMENSIONS (IN) • LOADS (LBS) • WEIGHT (LBS)
Pipe Size Max Load Weight Rod SizeA B C F GWidth
1⁄2
300
0.10
3⁄8
27⁄8 2 19⁄16
5/8
3⁄4 0.10 23⁄4 17⁄8 15⁄16
1 0.10 29⁄16 111⁄16 1
11⁄4 0.10 25⁄8 13⁄4 7⁄811⁄2 0.10 23⁄4 17⁄8
2 0.11 31⁄4 23⁄8 11⁄8
21⁄2 525 0.20 4 23⁄4 15⁄16
3/4
3 0.20 313⁄16 215⁄16 13⁄16
4 650 0.30 411⁄16 313⁄16 19⁄165
1,000
0.54
1⁄2
55⁄16 43⁄8
6 0.65 611⁄16 59⁄16 21⁄4
8 1.00 89⁄16 79⁄16 31⁄4
Fig. 69 (Formerly Afcon Fig. 300) Adjustable Swivel Ring, Tapped Per NFPA Standards
Size Range: 1⁄2" through 8"
Material: Carbon steel
Finish: Strap is Pre-Galvanized Zinc Material. Nut is Zinc Plated.
Service: Recommended for suspension of non-insulated stationary pipe line.
Maximum Temperature: 450° F
Approvals: Complies with Federal Specification A-A-1192A (Type 10), WW-H-171-E (Type 10),
and ANSI/MSS SP-58 (Type 10). UL Listed and FM Approved (Sizes 3⁄4" - 8").
Features:
• 1/2" - 2" sizes designed for use with steel and CPVC piping and manufactured with
FBC System Compatible oil.
• Threads are countersunk so that they cannot become burred or damaged.
• Knurled swivel nut provides vertical adjustment after piping is in place.
• Captured swivel nut in the 1⁄2" through 6" sizes. The capture is permanent in the bottom
portion of the band, allowing the hanger to be opened during installation if desired, but
not allowing the nut to fall completely out.
Ordering: Specify size, figure number and name.
Non-captured nut also available upon request.
21/2" through 8" Size
1/2" through 2" Size
Rounded Edge Design
21/2" through 8" pipe1/2" through 1" pipe 1 1/4" through 2" pipe
B
C
F
CL
G
A
B
C
CL
G
A
F
A
BCF
CL
G