HomeMy WebLinkAboutPRODUCT DATA - PIPE & FITTINGS TYCO GROOVED FITTINGS - 18-00176 - 220 S 2nd W - Arbor Cove - Bldg (C) #2 - 32 Units - New Dormitory HousingGrinnell Grooved Fire Protection Products
Grooved Fittings
Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500
www.tyco-fire.com
September 2004 TFP1810Page 1 of 6
The grooved fittings provide an economical
and efficient method of changing direction,
adding an outlet, reducing, or capping
grooved piping systems. Grooved fittings
are available in durable ductile iron or
fabricated steel as indicated.
Note: Figure 510S and 519S fittings are
special short radius fittings with smaller
center to end dimensions than standard
grooved fittings. Depending on the size and
coupling used, there may be interferences at
the bolt pads that require repositioning of the
coupling orientation. The use of flange
adapters is not recommended with Figures
510S and 519S fittings. Contact Tyco Fire
Products for details.
WARNING
The Fittings described herein must be installed
and maintained in compliance with this document,
as well as with the applicable standards of the
National Fire Protection Association, in addition
to the standards of any other authorities having
jurisdiction. Failure to do so may impair the
performance of this device.
The owner is responsible for maintaining their
fire protection system and devices in proper
operating condition. The installing contractor or
sprinkler manufacturer should be contacted with
any questions.
Approvals:
UL, FM, ULC, VdS, and LPCB;
Note: See Fire Protection Submittal Sheet for
exact Listing / Approval information.
General
Description
When placing an order, indicate the full product
name. Please specify the quantity, figure number,
wall thickness, and size.
Grinnell Grooved Piping Products, valves,
accessories and other products are available
throughout the U.S., Canada, and internationally,
through a network of distribution centers. You
may write directly or call 215-362-0700 for the
distributor nearest you.
Ordering
Procedure
Care and
Maintenance
The owner is responsible for the inspection,
testing, and maintenance of their fire protection
system and devices in accordance with the
applicable standards of the National Fire Protection
Association (e.g., NFPA 25), in addition to the
standards of any authority having jurisdiction.
The installing contractor or product manufacturer
should be contacted relative to any questions.
Any impairment must be immediately corrected.
It is recommended that automatic sprinkler
systems be inspected, tested, and maintained by
a qualified Inspection Service.
Products manufactured by Tyco Fire Products are
warranted solely to the original Buyer for ten (10)
years against defects in material and workmanship
when paid for and properly installed and maintained
under normal use and service. This warranty will
expire ten (10) years from date of shipment by Tyco
Fire Products. No warranty is given for products or
components manufactured by companies not
affiliated by ownership with Tyco Fire Products or for
products and components which have been subject
to misuse, improper installation, corrosion, or which
have not been installed, maintained, modified or
repaired in accordance with applicable Standards of
the National Fire Protection Association (NFPA),
and/or the standards of any other Authorities Having
Jurisdiction. Materials found by Tyco Fire Products
to be defective shall be either repaired or replaced, at
Tyco Fire Products’ sole option. Tyco Fire Products
neither assumes, nor authorizes any person to
assume for it, any other obligation in connection with
the sale of products or parts of products. Tyco Fire
Products shall not be responsible for sprinkler system
design errors or inaccurate or incomplete information
supplied by Buyer or Buyer’s representatives.
IN NO EVENT SHALL TYCO FIRE PRODUCTS BE
LIABLE, IN CONTRACT, TORT, STRICT LIABILITY
OR UNDER ANY OTHER LEGAL THEORY, FOR
INCIDENTAL, INDIRECT, SPECIAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR CHARGES, REGARDLESS OF
WHETHER TYCO FIRE PRODUCTS WAS INFORMED
ABOUT THE POSSIBILITY OF SUCH DAMAGES,
AND IN NO EVENT SHALL TYCO FIRE PRODUCTS’
LIABILITY EXCEED AN AMOUNT EQUAL TO THE
SALES PRICE.
THE FOREGOING WARRANTY IS MADE IN LIEU OF
ANY AND ALL OTHER WARRANTIES EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Limited
Warranty
See Fire Protection
Submittal Sheet for
Pressure Rating and
Listing/Approval
Information
LPCB Vd S
Material:
Cast: Figures: 201, 210, 219, 250, 260, 501, 510,
519, 510DE, 501S, 510S and 519S -
Ductile iron conforming to ASTM A-536,
Grade 65-45-12
Fabricated Steel: Figures 391, 392, 393, 312,
313, 321, 327, 341 and 350 - Carbon Steel,
(Sizes 11/4" - 6" are Schedule 40);
(Sizes 8" - 12" are Schedule 30),
conforming to ASTM A-53 Grade B
Protective Coatings:
• Non-lead orange paint
• Fire brigade red (optional) non-lead paint
• Hot dipped galvanized conforming to ASTM
A-153
Technical
Data
Page 2 of 6 TFP1810
‡- Available with tapped plugs, contact Tyco Fire & Building Products.
Figures 201, 210, 219, and 260
Figure 201 Figure 210 Figure 219 Figure 260‡
45° Elbow 90° Elbow Tee End Cap
C to E Appx. Wt. C to E Appx. Wt. C to E Appx. Wt. E to E Appx. Wt.
Inches Lbs. Inches Lbs. Inches Lbs. Inches Lbs.
mm Kg. mm Kg. mm Kg. mm Kg.
1.75 0.9 2.75 1.0 2.75 1.4 0.88 0.4
44.5 0.4 69.9 0.5 69.9 0.6 22.4 0.2
1.75 1.1 2.75 1.2 2.75 1.8 0.88 0.6
44.5 0.5 69.9 0.5 69.9 0.8 22.4 0.3
2.00 1.8 3.25 2.0 3.25 2.7 0.88 0.9
50.8 0.8 82.6 0.9 82.6 1.2 22.4 0.4
2.25 2.2 3.75 3.0 3.75 5.8 0.88 0.9
57.2 1.0 95.3 1.4 95.3 2.6 22.4 0.4
2.25 2.2 3.75 3.0 3.75 5.8 0.94 1.1
57.2 1.0 95.3 1.4 95.3 2.6 23.9 0.5
2.50 3.5 4.25 4.5 4.25 7.0 0.88 1.1
63.5 1.6 108.0 2.0 108.0 3.2 22.4 0.5
2.88 5.5 4.75 8.5 4.75 11.5
73.0 2.5 120.7 3.9 120.7 5.2
3.00 5.2 5.00 8.5 5.00 11.8 1.00 2.6
76.2 2.4 127.0 3.9 127.0 5.4 25.4 1.2
3.25 7.7 5.25 11.3 5.25 10.6
82.6 3.5 133.4 5.1 133.4 4.8
3.25 7.7 5.50 11.3 5.50 15.3 0.92 4.7
82.6 3.5 139.7 5.1 139.7 6.9 23.4 2.1
3.25 8.5 5.50 13.5 5.50 17.0 1.00 5.0
82.6 3.9 139.7 6.1 139.7 7.7 25.4 2.3
3.50 12.0 6.00 14.6 6.00 13.9
88.9 5.4 152.4 6.6 152.4 6.3
3.50 12.0 6.50 18.5 6.50 26.0 1.00 7.5
88.9 5.4 165.1 8.4 165.1 11.8 25.4 3.4
3.50 12.0 6.50 18.5 6.50 26.0 1.00 7.5
88.9 5.4 165.1 8.4 165.1 11.8 25.4 3.4
4.25 23.0 7.75 36.5 7.75 45.0
108.0 10.4 196.9 16.6 196.9 20.4
4.25 23.0 7.75 36.5 7.75 45.0 1.19 12.8
108.0 10.4 196.9 16.6 196.9 20.4 30.2 5.8
4.75 31.0 9.00 60.0 9.00 72.1 1.25 20.0
120.7 14.1 228.6 27.2 228.6 32.7 31.8 9.1
5.25 40.0 10.00 67.0 10.00 92.5 1.25 36.0
133.4 18.1 254.0 30.4 254.0 42.0 31.8 16.3
Nominal
Size
11/4"
11/2"
2"
21/2"
76.1mm
3"
108.0mm - -
4"
133.0mm - -
139.7mm
5"
159.0mm - -
165.1mm
6"
216.3mm - -
8"
10"
12"
Friction Resistance*
(Expressed as Equivalent Straight Pipe)
Elbow Tee
Size 90°45°Branch Run
Inches Feet Feet Feet Feet
mm Meters Meters Meters Meters
11⁄4 1.9 1.0 4.8 1.9
42.4 0.6 0.3 1.5 0.6
11⁄2 2.3 1.2 5.8 2.3
48.3 0.7 0.4 1.8 0.7
2 3.2 1.6 8.0 3.2
60.3 1.0 0.5 2.5 1.0
21⁄2 3.9 2.0 9.8 3.9
73.0 1.2 0.6 3.0 1.2
4.1 2.1 10.3 4.1
1.2 0.6 3.1 1.2
3 4.9 2.4 12.2 4.9
88.9 1.5 0.7 3.7 1.5
6.5 3.3 16.3 6.5
2.0 1.0 5.0 2.0
4 6.5 3.3 16.3 6.5
114.3 2.0 1.0 5.0 2.0
8.0 4.0 20.0 8.0
2.4 1.2 6.1 2.4
8.0 4.1 20.0 8.0
2.4 1.3 6.1 2.4
5 8.2 4.1 20.5 8.2
141.3 2.5 1.3 6.3 2.5
9.5 4.8 23.8 9.5
2.9 1.4 7.2 2.9
9.5 4.8 23.8 9.5
2.9 1.4 7.2 2.9
6 9.9 5.0 24.8 9.9
168.3 3.0 1.5 7.6 3.0
13.1 6.6 32.8 13.1
4.0 2.0 10.0 4.0
8 13.1 6.6 32.8 13.1
219.1 4.0 2.0 10.0 4.0
10 16.5 8.3 41.3 16.5
273.0 5.0 2.5 12.6 5.0
12 19.9 9.9 49.7 19.9
323.4 6.1 3.0 15.1 6.1
76.1mm
108.0mm
133.0mm
139.7mm
159.0mm
165.1mm
216.3mm
Figure 260
E to E
Figure 201
C to E
C to E
Figure 210
C to E
C to E
Figure 219
C to E
C to E
For reducing tees and branches, use the value that is corrosponding
to the branch size. Example: for 8" x 8" x 2" tee, the branch
value 2" is 8.0 feet.
*Friction resistance for all elbows and tees except Figures 510S
and 519S.
Page 3 of 6 TFP1810
Figures 501S, 510S and 519S
Figure 501S Figure 510S Figure 519S
45° Elbow 90° Elbow Tee
C to E Appx Wt. C to E Appx. Wt. C to E Appx. Wt.
Inches Lbs. Inches Lbs. Inches Lbs.
mm Kg. mm Kg. mm Kg.
2.00 1.8 2.75 1.5 2.75 2.1
50.8 0.8 69.9 0.7 69.9 1.0
2.25 2.2 3.00 2.2 3.00 3.0
57.2 1.0 76.2 1.0 76.2 1.4
2.25 2.2 3.00 2.3 3.00 3.1
57.2 1.0 76.2 1.0 76.2 1.4
2.50 3.5 3.38 3.0 3.38 4.1
63.5 1.6 85.9 1.3 85.9 1.9
3.00 5.2 4.00 5.6 4.00 7.7
76.2 2.4 101.6 2.6 101.6 3.5
3.25 7.7 4.88 8.6 4.88 12.0
82.6 3.5 124.0 3.9 124.0 5.4
3.25 8.5 4.88 8.8 4.88 12.0
82.6 3.9 124.0 3.9 124.0 5.4
3.50 12.0 5.50 11.00 5.50 15.0
88.9 5.4 139.7 5.0 139.7 6.8
3.50 12.0 5.50 11.2 5.50 15.2
88.9 5.4 139.7 5.1 139.7 6.9
4.25 23.0 6.88 23.4 6.88 31.2
108.0 10.4 174.8 10.6 174.8 14.2
Nominal
Size
2"
21/2"
76.1mm
3"
4"
139.7mm
5"
165.1mm
6"
8"
Figure 510S*
C to E
C to E
Figure 519S*
C to E
C to E
*Note: Figure 510S and 519S fittings are special short radius fittings with smaller center to end dimensions
than standard grooved fittings. Depending on the size and coupling used, there may be interferences
at the bolt pads which requires repositioning of the coupling orientation. The use of flange adapters is
not recommended with Figures 510S and 519S fittings. Contact Tyco Fire Products for details.
Figures 501, 510, 519 and 510DE
Figure 501
C to E
C to E
Figure 510
C to E
C to E
Figure 501S
C to E
C to E
Figure 510DE
C to E
C to E
A
B
Figure 519
C to E
C to E
Figure 501 Figure 510 Figure 519 Figure 510DE
45° Elbow 90° Elbow Tee 90° Drain Elbow
C to E Appx. Wt. C to E Appx. Wt. C to E Appx. Wt. C to E A B Appx. Wt.
Inches Lbs. Inches Lbs. Inches Lbs. Inches Inches Inches Lbs.
mm Kg. mm Kg. mm Kg. mm mm mm Kg.
1.75 0.9 2.75 1.0 2.75 1.4
44.5 0.4 69.9 0.5 69.9 0.6
1.75 1.1 2.75 1.2 2.75 1.8
44.5 0.5 69.9 0.5 69.9 0.8
2.00 1.8 3.25 2.0 3.25 2.7
50.8 0.8 82.6 0.9 82.6 1.2
2.25 2.2 3.75 3.0 3.75 5.8 3.75 2.00 2.75 2.7
57.2 1.0 95.3 1.4 95.3 2.6 95.3 50.8 69.9 1.2
2.50 3.5 4.25 4.5 4.25 7.0 4.25 2.34 2.75 3.7
63.5 1.6 108.0 2.0 108.0 3.2 108.0 59.4 69.9 1.7
3.00 5.2 5.00 8.5 5.00 11.8 5.00 2.85 2.75 7.0
76.2 2.4 127.0 3.9 127.0 5.4 127.0 72.4 69.9 3.2
3.25 8.5 5.50 13.5 5.50 17.0 5.50 3.38 2.75 13.0
82.6 3.9 139.7 6.1 139.7 7.7 139.7 85.9 69.9 5.9
3.50 12.0 6.50 18.5 6.50 26.0 6.50 3.92 2.75 13.4
88.9 5.4 165.1 8.4 165.1 11.8 165.1 99.6 69.9 6.1
4.25 23.0 7.75 36.5 7.75 45.0 7.75 4.95 2.75 26.3
108.0 10.4 196.9 16.6 196.9 20.4 196.9 125.7 69.9 11.9
Nominal
Size
11/4"--- -
11/2"--- -
2"--- -
21/2"
3"
4"
5"
6"
8"
Friction Resistance 501S, 510S & 519S
(Expressed as Equivalent Straight Pipe)
Elbow Tee
Size 90°45°Branch Run
Inches Feet Feet Feet Feet
mm Meters Meters Meters Meters
2 3.2 1.6 8.0 3.2
60.3 1.0 0.5 2.5 1.0
21⁄2 3.9 2.0 9.8 3.9
73.0 1.2 0.6 3.0 1.2
4.1 2.1 10.3 4.1
1.2 0.6 3.1 1.2
3 4.9 2.4 12.2 4.9
88.9 1.5 0.7 3.7 1.5
4 6.5 3.3 16.3 6.5
114.3 2.0 1.0 5.0 2.0
8.0 4.1 20.0 8.0
2.4 1.3 6.1 2.4
5 8.2 4.1 20.5 8.2
141.3 2.5 1.3 6.3 2.5
9.5 4.8 23.8 9.5
2.9 1.4 7.2 2.9
6 9.9 5.0 24.8 9.9
168.3 3.0 1.5 7.6 3.0
8 13.1 6.6 32.8 13.1
219.1 4.0 2.0 10.0 4.0
76.1mm
139.7mm
165.1mm
Page 4 of 6 TFP1810
Figures 250 and 350
Figure 350
Fabricated
Sizes 3” to 6”
E to E
E to E
Figure 350
Fabricated
Sizes 8” to 12”
E to E
Figure 250
Cast
Figures 250 and 350 Concentric Reducer - Groove x Groove
Nominal E to E Appx. Wt. Nominal E to E Appx. Wt. Nominal E to E Appx. Wt.
Size Inches Lbs. Size Inches Lbs. Size Inches Lbs.
Inches mm Kg. Inches mm Kg. Inches mm Kg.
2.50 1.0 3.50 4.2 4.00 5.8
63.5 0.5 88.9 1.9 101.6 2.6
2.50 1.3 3.50 4.4 5.00 12.2
63.5 0.6 88.9 2.0 127.0 5.5
2.50 1.2 3.50 4.6 5.00 12.1
63.5 0.5 88.9 2.1 127.0 5.5
2.50 1.5 3.50 4.6 5.00 12.0
63.5 0.7 88.9 2.1 127.0 5.5
2.50 1.6 3.50 4.5 5.00 11.9
63.5 0.8 88.9 2.0 127.0 5.4
2.50 1.3 3.50 4.4 5.00 11.3
63.5 0.6 88.9 2.0 127.0 5.1
2.50 1.3 3.50 4.5 5.00 10.8
63.5 0.6 88.9 2.0 127.0 4.9
2.50 1.3 4.00 5.5 6.00 21.9
63.5 0.6 101.6 2.5 152.4 10.0
3.00 1.5 4.00 6.0 6.00 21.6
76.2 0.7 101.6 2.7 152.4 9.8
3.00 2.0 4.00 5.6 6.00 21.1
76.2 0.9 101.6 2.5 152.4 9.6
3.00 2.2 4.00 6.0 6.00 19.5
76.2 1.0 101.6 2.7 152.4 8.9
3.00 2.3 4.00 6.0 7.00 28.0
76.2 1.0 101.6 2.7 177.8 12.7
3.00 2.3 4.00 6.0 7.00 30.0
76.2 1.0 101.6 2.7 177.8 13.6
3.00 2.3 4.00 6.0 7.00 28.0
76.2 1.0 101.6 2.7 177.8 12.7
3.00 3.2 4.00 5.9 7.00 33.0
76.2 1.5 101.6 2.7 177.8 15.0
3.00 2.6 4.00 6.3
76.2 1.2 101.6 2.9
*2 x 11⁄4 *139.7mm x 3 *6 x 5
*2 x 11⁄2 *139.7mm x 4 8 x 2
*21⁄2 x 2 5 x 1
1⁄2 8 x 21⁄2
*76.1mm x 11⁄2 5 x 2 8 x 3
*76.1mm x 2 5 x 2
1⁄2 8 x 4
3 x 11⁄4 5 x 3 8 x 5
3 x 11⁄2 *5 x 4 8 x 6
*3 x 2 *165.1mm x 3 10 x 4
*3 x 21⁄2 *165.1mm x 4 10 x 5
*3 x 76.1mm *165.1mm x 139.7mm 10 x 6
4 x 11⁄4 *6 x 2 10 x 8
4 x 11⁄2 6 x 21⁄2 12 x 4
*4 x 2 *6 x 76.1mm 12 x 6
*4 x 21⁄2 6 x 3 12 x 8
*4 x 76.1mm *6 x 4 12 x 10
4 x 3 *6 x 139.7mm
B
C
A
D
ADA CAP®
Patented
Pipe Nominal Dimensions
O.D. Takeout Center to End
Size A B C D
Inches Inches Inches Inches Inches
mm mm mm mm
1.25 1.75 1.89 0.77
31.8 44.5 48.0 0.3
1.900 1.25 1.75 1.89 0.77
48.3 31.8 44.5 48.0 0.3
1.37 2.00 2.02 0.88
34.8 50.8 51.3 0.4
1.25 1.75 1.89 0.92
31.8 44.5 48.0 0.4
2.375 1.25 1.75 1.89 0.92
60.3 31.8 44.5 48.0 0.4
1.37 2.00 2.02 1.06
34.8 50.8 51.3 0.5
1.47 1.97 1.89 1.28
37.3 50.0 48.0 0.6
2.875 1.47 1.97 1.89 1.28
73.0 37.3 50.0 48.0 0.6
1.37 2.00 2.02 1.50
34.8 50.8 51.3 0.7
Net
Outlet Wt.
NPT* Lbs.
Inches Kg.
1/2
11/2 3/4
1
1/2
2 3/4
1
1/2
21/2 3/4
1
*ISO-7 threaded outlets are available upon request.
Note: Sizes marked with an asterisk (*) are only available in Figure 250 Cast.
Sizes without an asterisk are only available in Figure 350 Fabricated.
Page 5 of 6 TFP1810
Figures 391, 392, 393, 312 and 313
Figure 341
E to E
Figure 327
C to E
C to E
Figure
393
E to E
Figure
392
E to E
Figure
391
E to E
Figure
313C to E
C to E
Figure 341
150 lbs.
Flange Adapter
C to E Appx. Wt. E to E Appx. Wt.
nches Lbs. Inches Lbs.
mm kg. mm kg.
2.75 2.0 4.00 2.8
69.6 0.9 101.6 1.3
2.75 2.2 4.00 3.2
69.9 2.0 101.6 1.5
3.25 2.7 4.0 5.2
82.6 1.2 101.6 2.4
3.75 5.0 4.00 8.0
95.3 2.3 101.6 3.6
4.25 7.1 4.00 10.2
108.0 3.2 101.6 4.6
5.00 11.9 6.00 17.2
127.0 5.4 152.4 7.8
5.50 17.1 6.00 21.4
139.7 7.8 152.4 9.7
6.50 27.5 6.00 26.0
165.1 12.5 152.4 11.8
7.75 47.0 6.00 38.4
196.9 21.3 152.4 17.4
9.00 68.0 8.00 65.0
228.6 30.8 203.2 29.5
10.00 107.0 8.00 91.0
254.0 48.5 203.2 41.3
Nominal
Size
11/4"
11/2"
2"
21/2"
3"
4"
5"
6"
8"
10"
12"
Figure 327
Cross
Figures 391,
392 and 393
Adapter Nipples
E to E Appx. Wt. C to E Appx. Wt. C to E Appx. Wt.
Inches Lbs. Inches Lbs. Inches Lbs.
mm Kg. mm Kg. mm Kg.
4.00 0.8 1.75 0.4 1.38 0.4
101.6 0.4 44.5 0.2 35.1 0.2
4.00 0.9 1.75 0.5 1.38 0.5
101.6 0.4 44.5 0.2 35.1 0.2
4.00 1.2 1.88 0.6 1.38 0.6
101.6 0.5 47.8 0.3 35.1 0.3
4.00 1.9 2.00 0.7 1.50 1.1
101.6 0.9 50.8 0.3 38.1 0.5
4.00 2.5 2.25 1.4 1.50 1.2
101.6 1.1 57.2 0.6 38.1 0.5
6.00 5.5 2.63 2.4 1.75 2.2
152.4 2.5 66.8 1.1 44.5 1.0
6.00 7.4 2.88 4.1 2.00 3.3
152.4 3.4 73.2 1.9 50.8 1.5
6.00 9.5 3.13 5.6 2.00 4.6
152.4 4.3 79.5 2.5 50.8 2.1
6.00 14.2 3.88 11.1 2.00 8.7
152.4 6.4 98.6 5.0 50.8 3.9
8.00 27.0 4.38 14.0 2.13 9.1
203.2 12.2 11.3 6.4 54.1 4.1
8.00 33.0 4.88 22.0 2.25 16.7
203.2 15.0 124.0 10.0 57.2 7.6
Nominal
Size
11/4"
11/2"
2"
21/2"
3"
4"
5"
6"
8"
10"
12"
Figure 312 Figure 313
221/2° Elbow 11
1/4° Elbow
Figures 327 and 341
Figure
312
C to E
C to E
General Notes: It is the Designer’s responsibility to select products suitable for the intended service and to ensure
that pressure ratings and performance data is not exceeded. Always read and understand the installation instructions
(IH-1000). Never remove any piping component or correct or modify any piping deficiencies without first
depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the
specific application.Certified Company
TYCO FIRE PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19946 Printed U.S.A.
Page 6 of 6 TFP1810
Figure 321
Figure 321
C to E
C to E
11⁄2 x 11⁄2 x 11⁄4 6 x 6 x 4
2 x 2 x 11⁄2 6 x 6 x 5
21⁄2 x 21⁄2 x 11⁄4 8 x 8 x 2
21⁄2 x 21⁄2 x 11⁄2 8 x 8 x 3
21⁄2 x 21⁄2 x 2 8 x 8 x 4
3 x 3 x 11⁄2 8 x 8 x 5
3 x 3 x 2 8 x 8 x 6
3 x 3 x 21⁄2 10 x 10 x 2
4 x 4 x 11⁄4 10 x 10 x 3
4 x 4 x 11⁄2 10 x 10 x 4
4 x 4 x 2 10 x 10 x 5
4 x 4 x 21⁄2 10 x 10 x 6
4 x 4 x 3 10 x 10 x 8
5 x 5 x 2 12 x 12 x 3
5 x 5 x 21⁄2 12 x 12 x 4
5 x 5 x 3 12 x 12 x 5
5 x 5 x 4 12 x 12 x 6
6 x 6 x 2 12 x 12 x 8
6 x 6 x 21⁄2 12 x 12 x 10
6 x 6 x 3
Figure 321 Reducing Tee
Nominal C to E Appx. Wt. Nominal C to E Appx. Wt.
Size Inches Lbs. Size Inches Lbs.
Inches mm Kg.Inches mm Kg.
3.25 2.0 6.50 26.6
82.6 0.9 165.1 12.1
3.25 2.7 6.50 27.0
82.6 1.2 165.1 12.2
3.75 4.2 7.75 36.2
95.3 1.9 196.9 16.4
3.75 4.2 7.75 36.5
95.3 1.9 196.9 16.6
3.75 4.3 7.75 36.6
95.3 2.0 196.9 16.6
4.25 5.3 7.75 36.8
108.0 2.4 196.9 16.7
4.25 5.5 7.75 37.0
108.0 2.5 196.9 16.8
4.25 5.8 9.00 57.1
108.0 2.6 228.6 25.9
5.00 9.8 9.00 57.4
127.0 4.4 228.6 26.0
5.00 9.9 9.00 57.6
127.0 4.5 228.6 26.1
5.00 10.1 9.00 57.8
127.0 4.6 228.6 26.2
5.00 10.3 9.00 58.0
127.0 4.7 228.6 26.3
5.00 10.5 9.00 58.4
127.0 4.8 228.6 26.5
5.50 14.5 10.00 80.2
139.7 6.6 254.0 36.4
5.50 14.8 10.00 80.5
139.7 6.7 254.0 36.5
5.50 15.2 10.00 80.7
139.7 6.9 254.0 36.6
5.50 15.8 10.00 80.9
139.7 7.2 254.0 36.7
6.50 26.5 10.00 91.4
165.1 11.9 254.0 41.5
6.50 26.5 10.00 91.8
165.1 12.0 254.0 41.6
6.50 26.5
165.1 12.0