HomeMy WebLinkAboutFIRE RATING PAINT - 17-00443 - 234 S 3rd E - Remodel SFR to DuplexControl
Coatings
Product Description:
GJ; 4�
F ME CONTROL E-;
l:)t"ior Intumesc r Latex Paint providing a
A Low VOC, Water E
S� V-W11A (J;`,(
IT OAAB
2 Hour
ur rat r;
Flame Control E-119 2 Hour is a water-based, interior, intumescent, latex paint designed for use on walls to increase
the time rating of the drywall assembly. Flame Control E-119 2 Hour has been tested in accordance with ASTM E-119
test methodology and has achieved a two hour rating (wall construction assembly listed separately) while a ;
successfully passing the [rose stream, t.ei:t.
Flame Control E-119 2 Hour is a low VOC pradw:t, and can be. Topcoated with Fl:irne Control 40-40A or 400 for varying
appearance and added durability. Flarnc Control E-119 dries to a flat finish while having the appearance of conventional
flat latex paint. In the presence of heat, Flarte Control E -J 1i) 2 Hour intumesces or purfs up, forming a dense protective
char that insulates the substrate.
Flame Control E-119 2 Hour can be applied in a single coat, ,.r i(lg apPLCata;n time and reducing labor costs.
Characteristics:
Finish
e
F7-�m
Fj C)' See 4pplinnon
nerai ure Sped on
Drying Time Cbl 77-F (25'C) 8:
50% R.H.
Universal Parch Colorant: 2 Fl;IW ounces
per gallon maximum
To tcuch: 1-?. Hours
10 Retail! 7 -. 4 l;purs
Surface Preparation:
All surfaces to be painted must be clean and cured.
Surface preparation should be carried out actnrding Lo
good painting practices. All dirt, grease, ni!, vrax, and
other surface contaminants should be prolutrly removed
prior to application of Flame Control E-119 7 Hou
intumescent coating
Previously Painted Surfaces:
Flame Control E-119 2 Hour coating may ha applied
directly to existing paint that is tightiv adherent and in
good condition. All glossy surfaces should b dulle.i wit,,
sandpaper. Spot priming where necessary shotOd he
carried out to ensure proper adhesion aid dry film
thickness.
life. 1 Year '
-- '
... __._ _._.._...... _. ,Less Than 40 g/I
Pc ;
int I---
None
arfClouncr
2 hour raiing sirrenu
r,te
Brush, Roller, Spray
20 mils WFT/10.3 mils DFT-
80 So. Ft/Gallon
temperature:
Flame Cuntiol f.-119 2 Hour coating is a water based
Preddct w[ukh will freeze and become unusable a',
f _tnperdture-; t,Navr >2-F. PROTECT FROM FREEZIW:
WRING SHIPrMI NF AND STORAGE. Do not store materi:J
At temperatures !:efow 50'F. Do not apply Flame Contra
E-119 2 HnuI when ambient air and substrate
temperatures tap below 50'F. Store between 50°F anG
807.
NJ Important:
Humidity 65%rrd higher must use fans to move air for
curing. High humidloJ may require longer cure times.
)
Please consult with your local code officials to perffl/ thus ✓our ipplicorion rnmpfies with file appropriate code requirement,
COs'l.tlYt,,;:r
Material Preparation:
Flame Control E-119 2 Hour roust be thoroughly mixed
before application. Failure to do .so will compromise the
protective capabilities of Flame Control Flame Control [-
119 2 Hour. We recommend mechanical stining with a
high speed drill and a paddle appropriate for the size
container. Contents should be stirred from the bottom up,
making sure to scrape the bottom and sides with a paint
stick as you go. Contents should be stirred to a creamy
consistency with no lumps.
Flame Control E-119 2 flour is a water based product and
slight thinning will not hurt the product (less than 5%). It
should be noted that thinning increases the Iikchhood of
not applying the proper film thickness, resulting in
decreased fire protection capabilities. It is the sole
responsibility of the applicator to ensure the proper film
thickness has been applied.
Flame Control E-119 2 Hour should never bo mixed with
other materials, however tinting using universal paint tint
is acceptable.
Application Equiparic oV
Flame Control E-119 2 Hour can be applied by brush, roller
or airless sprayer.
Brushing: Use top quality polyester/nylon b1cod hrushes
Rolling: 3/8" polyester blend nap roller cover's generally
work well when applying Flame Control E." 119 2 Hour by
roller.
Spraying:
Airless Spray Minimum:
PSI: 3000 PSI or higher or equivalent
Filter: 30 mesh, removal of filter is recommend from gun
and machine
Hose: 1/4" diameter airless spray line for thr first 50'
from pump and X" x 6' whip
Tip: 517 — 531
GPM: .95
For best results, use Hose: 3/8" diameter airless spray line
for the first 50' from pump and A" x 6' whip arc no filters
gun and machine.
FLAME CONTROL E-119 2 Hour
Irtnrior Intumescent. Latex Paint providing a 2 -hour ra g
A Low VOC, Water Based Prcc
For SmaIIAVCommercial and Residential Jobs:
Pump: (Titan) 7110 Impact or equivalent
PSI: 3300 / 227
GPM:.80
Tip: 517- 531 or equivalent.
Filter: 30 mesh, removal of filter is recommend from Ita:
and rn=,.hire
Hose: 1/6' diameter airless spray line for the first 56
from pump and ;h" x 6' whip
Pump: (Gra-.o! tetra Max 11 795 Hi -Boy or equivalent
PSI: ?300 / 2;Z7
GPM: 95
Tip: 517 - �-A or equivalent.
rilter: 3C Qsh, removal of filter is recommend from g..n
and machine
Hose: 1/4" diameter airless spray line for the first 50'
from pump and Sa" x 6' whip
Pump: GPX 130 or equivalent
PSI: 3300 / 227
GPM: 1.30
Tip: $17 - 5:31 orequivalent.
Filter: i emoval of filter is recommend from ,:-
and machin-,.
Hose: 1/4'liameter airless spray line for the first
from pump and 'S" x 6' whip
For Best results: For all Jobs big or small:
Pump: (G,14 i)) Mark 4 or 5 or equivalent
P51: 3300 / 227
GPNI: 135
Tip: 517 - 5:33 or equivalent.
Filter: 30 mesh, removal of filter is recommend from ju-!
an<i ..rc!'iip
Hose: 3/8' diameter airless spray line for the first:
from pumps and ;1"x 6' whip
Revised