Loading...
HomeMy WebLinkAboutDENSITY OF SOIL REPORT 15 - 14-00050 - Idaho Central Credit Union ASTM D-6938 Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth) PAGE #1 OF 1 REPORT DATE 4/25/2014 R:\Eastern Idaho\2014 Reports\E140030c - Idaho Central Credit Union, 673 North 2nd East, Rexburg, ID\rpt020md.docx  Environmental Services  Geotechnical Engineering  Construction Materials Testing  Special Inspections 1230 N Skyline Drive, Suite C  Idaho Falls, ID 83402  (208) 529-8242  Fax (208) 529-6911 www.mti-id.com  mti@mti-id.com Rev. January 21, 2014 M AT E RI ALS TESTI NG & INSPECTION Dustee Woolstenhulme Phone: 208-239-3003 Idaho Central Credit Union Fax: 208-239-3053 PO Box 2469 Other: EMAIL ONLY Pocatello, ID 83206 Project: Idaho Central Credit Union, 673 North 2nd East, Rexburg, ID Permit #: Project Manager: Dan King Inspector: Josh Christensen Inspection Date: April 24, 2014 As requested, MTI performed density testing in accordance with current applicable standards. The results obtained are as follows: 145056 1 Pit Run 127.2 7.5% Test # Probe Depth (in) Location Wet Density (pcf) % Moisture Dry Density (pcf) Material # Required % Compaction % Compaction Pass/Fail 1 8 8" below finish subgrade, exterior wall footing backfill: line D.3 and 8 126.3 3.6%121.8 1 95%96%PASS 2 8 Line D.5 and 7 126.4 3.3%122.4 1 95%96%PASS 3 8 Line D.9 and 2 126.4 3.4%122.2 1 95%96%PASS Lab ID # Material #Material Description Material Source Maximum Density (pcf) Optimum Moisture Standard Used Zollinger Pit Onsite Stockpile ASTM D-1557 Method of Testing: BS is Backscatter; Depth in inches is Direct Transmission Gauge Information: MTI #:17 Make & Model:Troxler 3440 Serial #:34596 Standard Counts:DS:2283 MS:730 If there are questions concerning this report (rpt020md), please contact the project manager at (208) 529-8242. Respectfully submitted, MATERIALS TESTING & INSPECTION, INC. Reviewed by Gavin J Marron cc: Rodger Ford, CM Company; Tom Callsen, CM Company