HomeMy WebLinkAboutEPOXY INSPECTION REPORT - 14-00050 - Idaho Central Credit Union
PAGE #1 OF 1
PRINT DATE 4/18/2014
R:\Eastern Idaho\2014 Reports\E140030c -
Idaho Central Credit Union, 673 North 2nd
East, Rexburg, ID\rpt018ep.docx
Environmental Services Geotechnical Engineering Construction Materials Testing Special Inspections
1230 N Skyline Drive, Suite C Idaho Falls, ID 83402 (208) 529-8242 Fax (208) 529-6911
www.mti-id.com mti@mti-id.com Revised February 2011
M AT E RI ALS
TESTI NG &
INSPECTION
Dustee Woolstenhulme Phone: 208-239-3003
Idaho Central Credit Union Fax: 208-239-3053
PO Box 2469 Other: EMAIL ONLY
Pocatello, ID 83206
Project: Idaho Central Credit Union, 673 North
2nd East, Rexburg, ID
Permit #:
Project Manager: Dan King
Inspector: Chris Park
Inspection Date: April 17, 2014
EPOXY INSPECTION REPORT
On the above date, our representative performed work on the referenced project as reported below.
Inspected 18 drilled holes to a depth of 7 inches and a diameter of 7/8 inches for 5/8 inch x 3 foot 7 inch dowels
to be installed at D10 (2), E10 (4), H5.5 (4), F1 (4), and D1 (4). MTI confirmed that the holes were cleaned by
blow out, and are ready for epoxy and dowels installation.
Observed injection of Hilti Hit HY 200 epoxy into the holes. MTI witnessed installation of 18 dowels into the
holes, and confirmed they received sufficient coating of epoxy.
Work inspected was in compliance with project plans and specifications.
Notes: An RFI is pending.
If there are questions concerning this report (rpt018ep), please contact the project manager at (208) 529-8242.
Respectfully submitted,
MATERIALS TESTING & INSPECTION, INC.
Reviewed by Gavin J Marron
cc: Rodger Ford, CM Company; Tom Callsen, CM Company