Loading...
HomeMy WebLinkAboutINSPECTION SUMMARY - 17-00280 - 50 College Ave - Mechanical ConsultationPermit Inspection Summary Permit Status of (Open) as of Report Date: 07/14/2017 1:45 pm Permit Details Permit Number: 17-00280 50 College Ave - Mechanical Consultation 50 College Ave Consultation case Permit Issued Date: Permit Inspection Statistics Total Inspections Completed: Total Inspections Passed: Inspection Pass Rate Permit Inspection History *Refer to Individual Inspection Report for more Details 05/25/2017COMPLIANTDon AllenMechanical Inspector Consultation Need more info on the exhaust hood that they want to install in the kitchenInspector Comments: Building Inspection Type 07/11/2017COMPLETEDQuinton OwensBuilding Inspector Consultation * Egress separation from main level tenants (rated?) * Extra exit (still require 44" width?) - Leave existing studs? * Stairs, 2 risers or more, require risers to be same height (within 3/8"), and treads to be same depth (within 3/8"). Handrails on both sides with top & bottom extensions where possible. * Minimum head clearance is 7'6" (furred ceilings/protruding objects are allowed with 7'0" minimum headroom for no more than one-third of room area) * Means of egress (walkways, corridors, stairs) may have 80" minimum headroom for no more than 50% of the means of egress element. Barriers shall be provided for protrusions less than 80" above floor. * The 49 maximum occupant load is needed to maintain a B occupancy and avoid fire rated separation requirements. * Verify minimum header size over opening in west wall of assembly room (a 4x6 was discussed as a possibility). It is likely the wall above is a bearing wall. * Exit signs to be visible from room if placed on wall just outside opening into room and should be installed at locations where path of egress becomes unclear. * Previous consultation comments remain applicable. Inspector Comments: Electrical Inspection Type 07/14/2017N/ABret StoddardElectrical Inspector Consultation Plumbing Inspection Type 07/14/2017N/ADon AllenPlumbing Inspector Consultation